• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권8호
• /
• pp.2718-2731
• /
• 2021

In the structural health monitoring of composite materials, in order to solve the ill-posed problem of impact force reconstruction, regularization techniques are often used to deal with it. Due to the poor convergence of the traditional Tikhonov regularization method, in order to accurately reconstruct the time history of the impact force, this paper improves Tikhonov regularization method and constructs homotopy function with strong convergence. Since the optimal regularization parameters need to be found in the homotopy function, the Newton downhill method is used to find the optimal parameters and the homotopy function can be calculated, which can accurately reconstruct the time history of the impact force. In order to verify the universality of the method in this paper, impact hammers of different materials were used in the experiment in this paper to study and compare the reconstruction effect of impact time history of different impact hammers.

• 한국산업융합학회 논문집
• /
• 제25권6_2호
• /
• pp.987-992
• /
• 2022

STS 410, a representative martensitic stainless steel, contains 13 % chromium and is used for building materials, automobile parts, office equipment, kitchen utensils, and tableware. In general, the strength of STS 410 changes by the carbon content, and STS 410 of low carbon has excellent toughness and high carbon has excellent abrasion resistance. In this study, a fatigue test was performed on the STS 410 material to evaluate the exact fatigue limit and to evaluate the behavior of the material against fatigue. In addition, the effect on burnishing, a kind of plastic processing that creates a smooth surface by pressing a ball or roller on the inner and outer surfaces of the material was evaluated. The fatigue limit was 509 MPa for the STS 410 material, and the result was 54.5 % of the tensile strength. The fatigue limit was 542 MPa for the specimen of diamind burnished STS 410 material, and it was 58.5 % of the tensile strength.

• Elastomers and Composites
• /
• 제57권4호
• /
• pp.157-164
• /
• 2022

Representative bulletproof materials, such as aramid or ultra-high molecular weight polyethylene(UHMWPE), have excellent strength and modulus in the plane direction but are very vulnerable to forces applied in the thickness direction. This paper reports a study on the effects of reinforcement in the thickness direction when bulletproof composite fabrics are prepared to improve their performance. Aramid and UHMWPE fabrics were combined using the film-bonding, needle-punching, or stitching methods and then subjected to low-velocity projectile and ball-drop impact tests. The results of the low-velocity projectile test indicated that the backface signature(BFS) decreased by up to 29.2% in fabrics obtained via the film-bonding method. However, the weight of the film-bonded fabric increased by approximately 23% compared with that obtained by simple lamination, and the fabric stiffened on account of the binder. Flexibility, light weight for wearability, and excellent bulletproof performance are very important factors in the development of bulletproof materials. When the needle-punching method was used, the BFS increased as the fibers sustained damage by the needle. When the composite fabrics were combined by stitching, no significant difference in weight and thickness was observed, and the BFS showed similar results. When a diagonal stitching pattern was employed, the BFS decreased as the stitching density increased. By contrast, when a diamond stitching pattern was used, the fabric fibers were damaged and the BFS increased as the stitching density increased.

• Applied Science and Convergence Technology
• /
• 제24권5호
• /
• pp.172-177
• /
• 2015

We present disordered moth eye structures on curved surfaces fabricated by dry etching of thermally dewetted metal nanoparticles. This lithography-free fabrication allows the formation of subwavelength scale nanostructures on the strongly inclined surfaces such as ball lens as well as on the microlens arrays with low curvature. In particular, we found that the size and average distance of nanostructures are closely related to the inclined angle of the surface. Experimental results on oblique angle deposition of metal thin films followed by thermal dewetting also support these effects.

• 전기학회논문지
• /
• 제60권8호
• /
• pp.1572-1576
• /
• 2011

The electromagnetic levitation(EMS) system is one of the well-known nonlinear system because of its nonlinearity and several control techniques have been proposed. We propose an ${\epsilon}$-scaling partial feedback controller for the ball position control of the EMS system. The key feature of our proposed controller is the use of the scaling factor ${\epsilon}$ which provides a function of controller gain tuning along with robustness. In this paper, we show the stability analysis of our proposed controller and the convergence analysis of the state observer in terms of ${\epsilon}$-scaling factor. In addition, the experimental results show the validity of the proposed controller and improved control performance over the conventional PID controller.

• 대한수학회논문집
• /
• 제17권1호
• /
• pp.37-51
• /
• 2002

Let X be a reflexive Banach space with a uniformly Gateaux differentiable norm, C a nonempty bounded open subset of X, and T a continuous mapping from the closure of C into X which is locally pseudo-contractive mapping on C. We show that if the closed unit ball of X has the fixed point property for nonexpansive self-mappings and T satisfies the following condition: there exists z $\in$ C such that ∥z-T(z)∥<∥x-T(x)∥ for all x on the boundary of C, then the trajectory tlongrightarrowz$_{t}$$\in$C, t$\in$[0, 1) defined by the equation z$_{t}$ = tT(z$_{t}$)+(1-t)z is continuous and strongly converges to a fixed point of T as t longrightarrow 1￣.ow 1￣.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집(한일합동학술편); 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.836-841
• /
• 1987

Many kinds of conditioning monitoring technique have been studied, so this study has investigated the possibility of checking the trend in the fault diagnosis of ball bearing, one of the elements of rotating machine, by applying the cepstral analysis method using the adaptive noise cancelling (ANC) method. And computer simulation is conducted in oder to identify obviously the physical meaning of ANC. The optimal adaptation gain in adaptive filter is estimated, the performance of ANC according to the change of the signal to noise ratio and convergence of LMS algorithm is considered by simulation. It is verified that cepstral analysis using ANC method is more effective than the conventional cepstral analysis method in bearing fault diagnosis.

• 소음진동
• /
• 제9권5호
• /
• pp.1029-1035
• /
• 1999

This paper relates to the flexural vibration analysis of slender spindle systems with multiple thin disks, supported by the ball bearings by means of the finite element method. Each system component is analytically modeled taking into account its flexibility and also the centrifugal effect especially for the disk. In order to show the rapid convergence rate and accuracy of the proposed approach, an experimental set-up is built to be versatile. In two distinct cases, its natural modes are numerically computed using only a small number of total element meshes as the shaft rotational speed is varied, and verified through experimental frequency response function obtained by the impact test.

• International journal of advanced smart convergence
• /
• 제7권3호
• /
• pp.66-72
• /
• 2018

In recent years, indoor simulated sports have become widely used, and screen baseball system has emerged that can play baseball in indoor space. In this paper, we propose a virtual pitching system that can improve the realism of screen baseball game. This virtual pitching system is characterized in that it uses a transmissive screen in the form of a pitching machine without a pitching hole and installed on the back of the screen. Therefore, unlike existing systems where pitching holes are formed on the screen, it enhances the immersion feeling of displayed images. Also, in this pitching system, the synchronization algorithm between the pitching machine and the virtual pitcher is used to form a sense of unity between the virtual pitcher and the ball according to various types of virtual pitchers, thereby enhancing the reality of baseball games.

• International journal of advanced smart convergence
• /
• 제10권1호
• /
• pp.125-133
• /
• 2021

The purpose of this study is to investigate the effect of the elderly's motivation to participate in ball games In order to clarify the purpose of this study, leisure sports participants over the age of 20 residing in the Jeonnam region in 2020 were selected as the population. In addition, 150 males, 150 females, and 300 total subjects were selected using the convenient sampling method. In addition, as a survey tool, a questionnaire was used centering on the motivation for participation in leisure sports, exercise commitment, and quality of life, and the data collected using this was processed statistically according to the purpose of analysis using SPSS 20.0 version. The results obtained through this research process are as follows. First, it was found that the motivation to participate in leisure sports has a partial effect on exercise commitment. Second, it was found that the motivation to participate in leisure sports partially affects the quality of life. Third, it was found that the commitment to exercise in leisure sports has a partial effect on the quality of life.