• 한국응용과학기술학회지
• /
• 제31권4호
• /
• pp.669-678
• /
• 2014

The amount of waste water generated from the domestic sources is consistently increasing in proportion to economic growth, and the conventional activated sludge process is widely being used for general waste water treatment. But the ministry of environment becomes stringthent treatment standards of N and P (less than 20mg/L of N, 2mg/L of P) to prevent the eutrophication of lake water, and therefore highly advanced treatment technology is required not only in the existing treatment plants where the activated sludge process is being used, but also in newly constructed treatment plants for the treatment of N and P. This study is aimed at highly operating the engineering technology method was developed by domestic to eliminate N and P at the same time. Experiments were conducted in the treatment plant located in Yong In city. The bioreactor was started from the principal equipment for the elimination of N and P and the elimination of organic compounds. It consists of an internal recycle piping from the end of the aerobic tank to the anoxic tank and external recycle piping from the final settling basin to the denitrification tank. By experiment of 4 types separate inflow of waste water to the denitrification tank and the anaerobic tank, and changes in staying time at the anoxic tank and the aerobic tank, the elimination of organic compounds in each type and the relationship in the efficiency between the elimination of N and P were researched.

• Environmental Engineering Research
• /
• 제11권1호
• /
• pp.45-53
• /
• 2006

Conventional coagulation is still the main treatment process for algae removal in water treatment. The coagulation efficiency can be significantly improved by the preoxidation of algae-containing water. Jar test was conducted to determine the optimal condition for the removal of diatoms, especially Cyclotella sp. by preoxidation and the subsequent coagulation. The effects of various concentration of PAC (Polyaluminum chloride) on coagulation with and without preoxidation using chlorine or potassium permanganate at different pHs (7.7 and 9.0) were evaluated. At pH 7.7, preoxidation with 2ppm $Cl_2$ followed by coagulation with 7.5 ppm PAC coagulant could reduce Cyclotella sp. concentration by 86%. At pH 9.0, preoxidation with 1 mg $KMnO_4/L$ followed by coagulation with 12.5 ppm PAC coagulant reduced Cyclotella sp. concentration by 85%. Non-linear regression was applied to determine the optimal condition. At pH 7.7 and 9.0, R was over 0.9, respectively. The pH of algal blooming water is over 9.0. Algae (diatom; Cyelotella sp.) can be controlled in the following ways: preoxidation with 1 mg $KMnO_4/L$ followed by coagulation with 12.5 ppm PAC coagulant can remove 80% algae from water. If water pH is adjusted to 7.7, it was expected that less amount of coagulant (7.5 or 10 mg PAC /L) after preoxidation ($Cl_2$ 2 ppm or $KMnO_4$ 0.33, 1 ppm) would be needed to achieve similar level of algae removal. The oxidation with 0.33ppm $KMnO_4$ followed by coagulation with 7.5 ppm PAC coagulant was preferable due to cost-effectiveness of treatment condition and color problem after treatment.

• 상하수도학회지
• /
• 제28권5호
• /
• pp.541-548
• /
• 2014

The pickling brine generated from the salting process of kimchi production is difficult to treat biologically due to very high content of salt. When pickling brine is treated and discharged, it cannot satisfy the criteria for effluent water quality in clean areas, while resources such as the salt to be recycled and the industrial water are wasted. However, sterilization by ozone, UV and photocatalyst is expensive installation costs and operating costs when considering the small kimchi manufacturers. Therefore there is a need to develop economical process. The study was conducted on the sterilization efficiency of the pickling brine using electrochemical processing. The electrochemical treatment of organic matters has advantages over conventional methods such as active carbon absorption process, chemical oxidation, and biological treatment because the response speed is faster and it does not require expensive, harmful oxidizing agents. This study were performed to examine the possibility of electrochemical treatment for the efficient processing of pickling brine and evaluated the performance of residual chlorine for the microbial sterilization.

• 상하수도학회지
• /
• 제31권6호
• /
• pp.481-490
• /
• 2017

Water and wastewater treatment has always been a challenging task due to the continuous increase in amount and the change in characteristics of the poorly biodegradable and highly colored organic matters, as well as harmful micro-organisms. Advanced techniques are therefore required to successfully remove these pollutants from water before reuse or discharge to receiving water bodies. Application of ozone, which is a powerful oxidant and disinfectant, alone or as part of advanced oxidation process depends on the complex kinetic reactions and the mass transfer of ozone involved. Micro- and nano bubbling considerably improves gas dissolution compared to conventional bubbles and hence mass transfer. It can also intensify generation of hydroxyl radical due to collapse of the bubbles, which in turn facilitates oxidation reaction under both alkaline as well as acidic conditions. This review gives the overview of application of micro- and nano bubble ozonation for purification of water and wastewater. The drawbacks of previously considered techniques and the application of the hydrodynamic ozonation to synthetic aqueous solutions and various industrial wastewaters are systematically reviewed.

• 대한환경공학회지
• /
• 제36권2호
• /
• pp.113-118
• /
• 2014

전 국가적으로 많은 정수장에서는 강화된 수질기준을 준수하는데 많은 어려움을 겪고 있다. 일반적으로 정수장 배출수처리시설은 고탁도를 기준으로 설계되기 때문에, 평상시에는 설계된 기간보다 장기간 체류할 수밖에 없는 실정이다. 평균 혹은 저탁도 원수가 유입되는 대부분 기간 동안 슬러지는 농축조에서 장기체류하기 때문에 혐기화되어, 용해성 망간 및 클로로포름이 형성된다. 위 문제를 해결하기 위해서 경제적이고, 손쉽게 도입 가능한 슬러지 폭기 공법을 개발하였으며, 본 연구는 이 공법의 원리 및 효과를 분석한 것이다. 슬러지 폭기 공법의 원리는 산화된 입자성 망간이 용해성 망간으로 환원되는 것을 방지하며, 생성된 클로로포름을 대기중으로 배출 제거시키며, 슬러지 입자를 균질화 시켜 침강성을 개선하는 것이다. 위 공법의 효과분석을 위하여 정수장 농축조에서 슬러지를 폭기시킨 후 상징수의 망간 및 클로로포름을 측정하고, 슬러지의 고-액 계면의 높이를 측정한 결과, 비폭기 경우에 비해 망간은 41%, 클로로포름은 62% 슬러지 부피는 35% 감소되는 효과를 얻었다.

• 패션비즈니스
• /
• 제15권5호
• /
• pp.43-54
• /
• 2011

Digital Textile Printing(DTP) is appropriate for quick response system(QRS) and is closely connected with high value added fashion industry. Fashion products of high price are mainly silk and cotton. For high quality DTP products, it is important to optimize the parameters of media, pre and after-treatment, ink, printer, etc. DTP for these two fiber materials is also accompanied certainly with steaming as after-treatment process for coloration. Role of steam is like water in exhaustion dyeing. Steam can diffuse dye or ink in printing paste to fiber. Quality of DTP products depend on after-treatment processes such as steaming, washing, drying. Current production amount of DTP is smaller than one of conventional textile printing. However conventional after-treatment system has been using so far. This is mismatched with DTP in terms of process efficiency, spot work of small lot, quality control. In this study, continuous after-treatment system has been suitably designed for DTP that washing and drying are available after steaming. So, It is possible to improve efficiency of DTP process. Especially, the effects of after-treatment process, such as temperature of heat drum, steaming time on printability, color difference, color fastness were examined. Two types of samples(cotton knit and silk fabrics) were used. The results were obtained as follows : First, there is no a wide difference between the K/S values of cotton and silk treated with continuous after-treatment system and those of sample treated with conventional printing after-treatment method. So it is more effective to use the continuous after-treatment system than conventional printing after-treatment system in case of the daily throughput of 1,000 yards below. Second, after continuous after-treatment for DTP, K/S values were increased and lightness($L^*$) values were decreased. ${\Delta}E$ values were below 2.3. Third, DTP samples treated with continuous after-treatment system were tested for fastness(washing, light, rubbing). Grades of fastness(washing, light, rubbing) were above 3 grade.

• 한국환경보건학회지
• /
• 제31권3호
• /
• pp.192-198
• /
• 2005

The occurrence of toxic cyanobacterial blooms has been reported worldwide and poses a threat to human health through drinking water exposure. The toxins they produce are highly water soluble and can leach into the water body. To eliminate any risk of drinking water exposure, removal of these toxins is essential before the water is consumed. Conventional water treatment techniques such as chlorination, if managed well, can be effectively used to remove some of these toxins, however, saxitoxin and its derivatives pose a problem. Little toxicological data are available to evaluate the real threat of these toxins.

• 유기물자원화
• /
• 제2권1호
• /
• pp.87-98
• /
• 1994

슬러지 발생량은 정수처리공정에서 부터 슬러지 농축 및 탈수에 이르는 과정을 최적화하므로써 감량화할 수 있다. 본 논문에서는 탈수 및 건조기법에 의하여 정수처리공정에서 발생하는 슬러지의 함수율을 낮추어 슬러지 발생량을 줄이는 방법에 대하여 연구하였다. 탈수효율향상을 위한 polymer 투입량 및 교반조건등을 최적화하고, 온도에 따른 슬러지의 중량변화에 대하여 관찰하였다. 탈수효율은 polymer의 종류보다 교반강도에 의한 영향이 크고, pH의 영향도 큰 것으로 나타났다. 최적 polymer 주입농도는 1.5mg-polymer/g-TSS이었고, pH가 약산성이나 약알카리성 조건에서 탈수효율이 양호한 것으로 나타났다. 교반강도는 낮을수록(10,000ses-1이하) 효율이 향상되었고, 속도구배(G)보다 GT값이 중요한 영향인자인 것으로 나타났다. 자유수의 건조는 $100^{\circ}C$ 전후, 화학적 결함수는 $300^{\circ}C$ 근방에서 증발하며, 유기물질은 약 $300-600^{\circ}C$ 구간에서 산화되어 증발하는 것으로 나타났다. 취수원 수질에 따라 강열감량은 약 15-40%로 나타났으며, 화학적 결합수에 의한 감량이 약 10-20%, 유기물질에 의한 감량이 약 4-20%인 것으로 나타났다.

• Advances in materials Research
• /
• 제6권4호
• /
• pp.329-341
• /
• 2017

The challenge of replacing conventional plastics with biodegradable composite materials has attracted much attention in product design, particularly in the tensile-related areas of application. In this study, fibres extracted from oil palm empty fruit bunch (EFB) were treated and utilized in reinforcing polyester matrix by hand lay-up technique. The effect of fibre loading and combined influence of alkali and silane treatments on porosity and water absorption parameters, and its correlation with the tensile behaviour of composites was analyzed. The results showed that tensile strength decreased whilst modulus of elasticity, water absorption and porosity parameters increased with increasing fibre loading. The composites of treated oil palm EFB fibre exhibited improved values of 2.47 MPa to 3.78 MPa for tensile strength; 1.75 MPa to 2.04 MPa for modulus of elasticity; 3.43% to 1.68% for porosity and 3.51% to 3.12% for water absorption at respective 10 wt.% fibre loadings. A correlation between porosity and water absorption with tensile behavior of composites of oil palm EFB fibre and positive effect of fibre treatment was established, which clearly demonstrate a connection between processing and physical properties with tensile behavior of fibre composites. Accordingly, a further exploitation of economic significance of oil palm EFB fibres composites in areas of low-to-medium tensile strength application is inferred.

• 한국식품과학회지
• /
• 제36권2호
• /
• pp.255-261
• /
• 2004

일반적으로 탁주 생산 공정에서 오존을 처리하는 경우는 용기 및 음용수의 소독을 주목적으로 하고 있다. 그러나 지하수 등에 오존을 이용하는 경우, 오존의 산화반응으로 탁주의 품질 에 긍정적인 효과를 보이는 것으로 나타났으며 담금 공정에서의 오존처리효과를 분석한 결과, 오존 처리시 수중의 오존의 오존농도가 1 ppm이하의 규정을 유지한 상태에서 오존주입량을 증가시키게 되면 오존 증가와 함께 에탄올의 생성량은 1차 담금 4일 째부터 20%이상 증가하는 것으로 나타났다. 특히 오존을 단독으로 처리하는 경우보다 오존과 자외선을 동시에 처리하는 경우에 에탄올 생성량은 10%이상 증가하는 것으로 나타났다. 또한, 오존의 주입시간에 따라 에탄올 발생량이 다르게 나타났으며 오존주입시간을 4시간 처리한 경우가 미 오존 처리한 경우와 비교하여 수중의 경도는 85%이상 감소되며 전기전도도는 50%이상 증가하였지만 수중의 산소농도는 1.2 ppm 미만으로 큰 차이가 나타나지 않았다. 지하수의 오존주입시간별 발효일 경과에 따라 에탄올 발생량을 비교해 본 결과 담금 첫날과 비교하여 담금일 4일후 최대 300% 차이가 나는 것으로 나타났다. 이상의 실험결론을 토대로 1차 담금에서 당의 생성량을 비교해 본 결과, 오존단독 처리와 오존과 자외선을 동시에 처리한 경우와 비교하였을 경우에 당의 생성량은 35%이상 증가하는 것으로 나타났다.