• Proceedings of the Korea Society for Simulation Conference
• /
• 2003.06a
• /
• pp.155-160
• /
• 2003

Today, for improvement of container terminal productivity, it is necessary to develop ACT(Automated Container Terminal) But, decision rules for conventional container terminals expose various limitations to be applied to ACT. Specially it is important fact to assignment of containers, because the character of ACT which block layout is vertical for berth. And then there is need which assignment of containers with remarshaling work using ATC(Automated Transfer Crane)s. The objective of this study is to provide the operation rules for remarshaling work in ACT. To analyze the proposed rules, the simulation is performed, and we show efficiency of remarshaling on various remarshaling operation rules.

• Journal of Communications and Networks
• /
• v.9 no.3
• /
• pp.254-264
• /
• 2007

A promising approach to improve the performance of mobile location system is the use of antenna arrays in both transmitter and receiver sides. Using advanced array signal processing techniques, such multiple-input multiple-output (MIMO) communication systems can offer more mobile location information by exploiting the spatial properties of the multipath channel. In this paper, we propose a novel approach to determine the position of mobile terminal based on estimated multipath signal parameters using only one base station in MIMO communication systems. This approach intends to minimize the error occurring from the estimation of multiple paths and gives an optimal estimation of the position of mobile terminal by simultaneously calculating a set of nonlinear location equations. This solution breaks the bottleneck of conventional mobile location systems which have to require multilateration of at least three base stations.

• Journal of the Korean Arthroscopy Society
• /
• v.1 no.1
• /
• pp.132-138
• /
• 1997

The purpose of this study is to compare the results between conventional and accelerated rehabilitation program following ACL reconstruction using bone-patellar tendon-bone. Conventional rehabilitation focused on protecting the new ligament by blocking terminal extension and avoiding active quadriceps function in the terminal degrees of extension. But there is current trend toward early postoperative mobilization and intensive. so called 'accelerated', rehabilitation stressing hyperextension of the knee. The results of intraarticular ACL reconstruction with conventional and accelerated rehabilitation were prospectively compared for one year postoperatively in a series of 27 patients. Range of motion and thigh circumference were checked preoperatively, and weekly up to 8 weeks, 3 months. 6 months, and 1 year postoperatively. Stress radiologic test, KT-1000 arthrometer. Cybex II dynamometer were checked in preoperatively, and 3 months, 6 months, and 1 year postoperatively. There were no differences of objective stability and restoration of muscle power. But the accelerated group had a low incidence of extension loss. excellent range of motion, and less difference of thigh circumference. We concluded that accelerated rehabilitation program is recommendable due to superiority in terms of range of motion, especially less extension loss without increasing laxity of knee joint.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.3
• /
• pp.483-496
• /
• 2024

This paper proposes a location-based inter-beam handover event considering terminal mobility to enhance the service quality for terminals in satellite networks. The terminal continuously measures the distance between the serving cell and neighboring cell centers, and checks whether the handover event condition is satisfied, taking into account the terminal's velocity. Performance analysis results demonstrate that the proposed location-based handover event reduces the frequency of unnecessary handover event triggering compared to the conventional received signal strength-based handover event, thereby improving the service continuity of the terminal.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.165-171
• /
• 2006

The appearance of over 10,000 TEU containerships (so called Mega-containerships) is determined. In order to operate these ships effectively, the number of these calling ports will diminish, and then feeder ships will transport cargoes from the hub-ports where mega-containerships call to the destination ports. In the hub-ports, handling containers for mega-containerships become huger, thus it is important for terminals to deal with cargo handling as soon as possible. However, the present terminal layout might have the limitation of maximum throughput per time unit. And then the transit time at the ports become longer. Therefore, we investigate the effect on some different terminal layouts with new alternatives. Actually, we discuss the ship-to-berth allocation at some adjacent berths for mega-containerships on three types of terminal layouts. First one is the conventional type consisted by some linear berths, most container terminals in the world are normally this type. Second one is the indented type consisted by linear berths and indented berths which we can handle from both sides of mega-containership simultaneously. Third one is the floating type consisted by linear berths and the floating berth. On this type, mega-containerships can moor between linear and floating berths. The merits of this type are that we can also handle from both sides of mega-containerships simultaneously, and ships can go through between linear berth and floating berths. Thus it is easier for ships to moor and leave berths. Under such assumptions, we examine the numerical experiments. In most cases, the total service times on the indented type are the longest among three types, these on the floating type are the next longer. Those reasons are that these layouts have the differences of berth occupancy obtained by the time and space axes, and whether the precedence constraints of ship service order needs or not.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.9
• /
• pp.2298-2306
• /
• 2014

In this paper, we propose an open loop power control algorithm to control transmission power of the On-The-Move(OTM) Satcom terminal in GEO satellite communication environment. The proposed algorithm identifies the current channel state restricted by an obstacle or an antenna depointing loss based on the received beacon signal strength. On the basis of the determined signal attenuation causes, the OTM Satcom terminal turns off the RF output when an antenna tracking is failed. If the OTM Satcom terminal experiences a channel blockage by an obstacle, the terminal spreads the transmit data to increase data reception probability. To evaluate the performance of the proposed algorithm, we compare an adjacent satellite interference level and an outage probability. The results show the performance of the proposed algorithm is better than that of the conventional algorithm.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.06b
• /
• pp.317-323
• /
• 2006

This paper deals with High Stacking System(HSS) development to develop a next generation port handling system for accommodating mega-sized container ships. It aims to develop the HSS that maximizes handling capacity within the limited space of the port. The system is expected to resolve the problem of yard space shortage as well as utilize innovative technology to ensure high-performance and automation at the terminal so as to enhance stevedoring productivity. The main objectives of this paper is suggesting the design concept drawing the HSS terminal and simulation analysis was undertaken taking into consideration performance of handling equipment, and port handling system Design concept drawing of the HSS terminal and will be used as base data for basic design and detailed design in actual operations of the terminal in the future. The HSS, to be applied to both conventional and new terminals, is expected to act as a catalyst for enhancing the value-added at ports.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.4
• /
• pp.88-95
• /
• 2015

This paper presents a new analysis of RF negative resistance (RFNR) circuits, known as a negative resistance generator. For accurate equation analysis of RFNR, this study examined the effects of the gate resistance and the source parasitic capacitance of the transistor. In addition, the input admittance of the conventional equation was calculated by looking into the source-terminal of the transistor, whereas that of the proposed equation was calculated by examining the gate-terminal of the transistor. The proposed equation analysis is more accurate than that of the conventional analysis, especially for higher frequency range. This paper verify the accuracy of the proposed analysis at high frequency range using the simulation.

• Journal of IKEEE
• /
• v.25 no.1
• /
• pp.201-205
• /
• 2021

In this paper present Low Drop-Out (LDO) regulator that improved load transient characteristics due to the push-pull detection structure. The response characteristic of the voltage delta value is improved due to the proposed push-pull sensing circuit structure between the input terminal of the LDO regulator pass transistor and the output terminal of the internal error amplifier. Voltage value has improved load transient characteristics than conventional LDO regulator. Compared to the conventional LDO regulator, it has an improved response speed of approximately 244 ns at rising time and approximately 90 ns at falling time. The proposed circuit was simulated by the samsung 0.13um process using Cadence's Specter and Virtuoso simulator.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.05a
• /
• pp.59-60
• /
• 2023

The automation of container terminals is an important factor that determines port competitiveness, and global advanced ports tend to strengthen their competitiveness through container terminal automation. The operational efficiency of the AGV, which is an essential transport equipment of the automated terminal, can improve the productivity of the automated terminal. The operation of AGVs in automated container terminals differs from that of conventional container terminals, as it is based on an automated system in which AGVs travel along designated paths and operate according to assigned tasks, requiring consideration of factors such as workload, congestion, and collisions. To prevent such problems and improve the efficiency of AGV operations, a more sophisticated model is necessary. Thus, this paper proposes an AGV scheduling model that takes into account the AGV travel path and task assignment within the terminal The model prevent the problem of deadlock and. various cases are generated by changing AGV algebra and number of tasks to create AGV driving situations and evaluate the proposed algorithm through algorithm and optimization analysis.