• 폴리머
• /
• 제25권4호
• /
• pp.476-485
• /
• 2001

본 연구에서는 고분자 지지체를 만든 후 약물을 흡수시켜 방출 특성을 검토하는 기존의 방법에서 나타나는 초기 과다 방출이라는 단점을 보완하고 장기간에 걸친 약물방출이 가능한 고분자 지지체를 구축하기 위해 광반응 관능기를 갖는 히아루론산과 sodium alginate 유도체로 세포의 성장을 촉진하는 약물을 함입한 미립자를 만들고 이를 성형가공한 고분자 지지체를 제작하여 약물 방출 특성을 검토하였다. 이러한 방법으로 만들어진 지지체는 초기 방출이 억제되고 오랜 기간 동안 지속적으로 약물을 서서히 방출하였으며, 뿐만 아니라 천연고분자가 갖는 생체내 분해 특성으로 인하여 일정한 기간 동안 형태를 유지하며 지지체로 기능을 한 이후 분해되어 재생된 조직이 손상조직과 대체 가능하므로, 세포의 성장과 분화를 유도하는 손상조직 대체용 고분자 지지체 본연의 목적을 달성할 수 있을 것으로 기대된다.

• 폴리머
• /
• 제24권5호
• /
• pp.638-645
• /
• 2000

디올 또는 다가 알콜의 존재 하에서 DL-락트산 및 L-락티드를 연속 중합하여 선형 (ABA 형)과 스타형 ((AB)$_{n}$ 형)의 폴리락트산 입체블록 공중합체를 합성하고 분석하였다. 알콜의 함량에 따라 블록 공중합체의 분자량을 어느 정도 범위에서 조절할 수 있었으며, 합성된 중합체는 비교적 좁은 분자량 분포를 나타내었다. 폴리락트산 입체블록 공중합체의 유리전이온도는 5$0^{\circ}C$ 부근이었으며, 융점은 구조와 분자량에 따라 100~14$0^{\circ}C$ 범위에서 관찰되었다. 용융 엔탈피로부터 얻은 결정화도의 측정 결과로부터 블록구조를 갖는 공중합체는 D-입체이성질체 단량체의 높은 조성(~35%)에서도 결정화가 충분히 일어남을 확인하였는데 이는 유사한 조성의 랜덤 공중합체의 성질과 대비된다. 선형과 스타형 블록 공중합체의 경우 모두 열처리 온도와 시간에 따른 결정화도의 변화를 관찰하였다.다.

• Macromolecular Research
• /
• 제17권9호
• /
• pp.709-713
• /
• 2009

The aim of this study was to develop novel intestinal specific drug delivery systems with pH sensitive swelling and drug release properties. The carboxyl group of ibuprofen was converted to a vinyl ester group by reacting ibuprofen and vinyl acetate as an acylating agent in the presence of catalyst. The glucose-6-acrylate-1, 2, 3, 4-tetraacetate (GATA) monomer was prepared under mild conditions. Cubane-1, 4-dicarboxylic acid (CDA) linked to two 2-hydroxyethyl methacrylate (HEMA) group was used as the crosslinking agent (CA). Methacrylic-type polymeric prodrugs were synthesized by the free radical copolymerization of methacrylic acid, vinyl ester derivative of ibuprofen (VIP) and GATA in the presence of cubane cross linking agent. The structure of VIP was characterized and confirmed by FTIR, $^1H$ NMR and $^{13}C$ NMR spectroscopy. The composition of the cross-linked three-dimensional polymers was determined by FTIR spectroscopy. The hydrolysis of drug polymer conjugates was carried out in cel-lophane membrane dialysis bags, and the in vitro release profiles were established separately in enzyme-free simulated gastric and intestinal fluids (SGF, pH 1 and SIF, pH 7.4). The detection of a hydrolysis solution by UV spectroscopy at selected intervals showed that the drug can be released by hydrolysis of the ester bond between the drug and polymer backbone at a low rate. Drug release studies showed that increasing the MAA content in the copolymer enhances the rate of hydrolysis in SIP. These results suggest that these polymeric prodrugs can be useful for the release of ibuprofen in controlled release systems.

• 대한화학회지
• /
• 제39권1호
• /
• pp.47-56
• /
• 1995

세자리 Schiff base의 몰리브네늄(V) 착물로써 $[Mo(Ⅴ)_2O(SOHB)_4],\; [Mo(Ⅴ)_2O_3(SOIP)_2(NCS)_2]$ 및 $ [Mo(Ⅴ)_2O_3(SOTB)_2(H_20)_2]$ (SOHB: Salicylidene-o-imino hydroxybenzene, SOIP; Salicylidene-o-imino pyridine, SOTB; Salicylidene-o-imino thiolbenzene)들을 합성하였다. 이들 착물들의 원소분석과 금속정량, IR, UV-visible spectrum 및 열무게분석(TGA)으로부터 금속과 리간드의 몰비가 1:1 및 1:2 착물임을 확인하였다. 0.1 M tetraethylammonium perchlorate (TEAP) 지지전해질을 포함한 비수용매에서 순환 전압-전류법과 시차펄스 폴라로그래피에 의한 전기화학적 측정으로부터 이들 착물들은 일전자 전이의 확산지배적인 환원과정이 다음과 같이 진행됨을 알았다. Mo(Ⅴ)Mo(Ⅴ)e-→ Mo(Ⅴ)Mo(Ⅳ)e-→Mo(Ⅳ)Mo(Ⅳ)e-→Mo(Ⅳ)Mo(Ⅲ).

• 한국재료학회지
• /
• 제24권8호
• /
• pp.393-400
• /
• 2014

NiO catalysts were successfully coated onto FeCrAl metal alloy foam as a catalyst support via a dip-coating method. To demonstrate the optimum amount of NiO catalyst on the FeCrAl metal alloy foam, the molar concentration of the Ni precursor in a coating solution was controlled, with five different amounts of 0.4 M, 0.6 M, 0.8 M, 1.0 M, and 1.2 M for a dip-coating process. The structural, morphological, and chemical bonding properties of the NiO-catalyst-coated FeCrAl metal alloy foam samples were assessed by means of field-emission scanning electron microscopy(FESEM), scanning electron microscopy-energy dispersive spectroscopy(SEM-EDS), X-ray diffraction(XRD), and X-ray photoelectron spectroscopy(XPS). In particular, when the FeCrAl metal alloy foam samples were coated using a coating solution with a 0.8 M Ni precursor, well-dispersed NiO catalysts on the FeCrAl metal alloy foam compared to the other samples were confirmed. Also, the XPS results exhibited the chemical bonding states of the NiO phases and the FeCrAl metal alloy foam. The results showed that a dip-coating method is one of best ways to coat well-dispersed NiO catalysts onto FeCrAl metal alloy foam.

• 한국재료학회지
• /
• 제23권2호
• /
• pp.143-148
• /
• 2013

Well-distributed $SnO_2$-Sn-$Ag_3Sn$ nanoparticles embedded in carbon nanofibers were fabricated using a co-electrospinning method, which is set up with two coaxial capillaries. Their formation mechanisms were successfully demonstrated. The structural, morphological, and chemical compositional properties were investigated by field-emission scanning electron spectroscopy (FESEM), bright-field transmission electron microscopy (TEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). In particular, to obtain well-distributed $SnO_2$ and Sn and $Ag_3Sn$ nanoparticles in carbon nanofibers, the relative molar ratios of the Ag precursor to the Sn precursor including 7 wt% polyacrylonitrile (PAN) were controlled at 0.1, 0.2, and 0.3. The FESEM, bright-field TEM, XRD, and XPS results show that the nanoparticles consisting of $SnO_2$-Sn-$Ag_3Sn$ phases were in the range of ~4 nm-6 nm for sample A, ~5 nm-15 nm for sample B, ~9 nm-22 nm for sample C. In particular, for sample A, the nanoparticles were uniformly grown in the carbon nanofibers. Furthermore, when the amount of the Ag precursor and the Sn precursor was increased, the inorganic nanofibers consisting of the $SnO_2$-Sn-$Ag_3Sn$ nanoparticles were formed due to the decreased amount of the carbon nanofibers. Thus, well-distributed nanoparticles embedded in the carbon nanofibers were successfully synthesized at the optimum molar ratio (0.1) of the Ag precursor to the Sn precursor after calcination of $800^{\circ}C$.

• 한국자기학회지
• /
• 제16권3호
• /
• pp.163-167
• /
• 2006

초음파 조사 및 계면활성제 첨가에 따른 입자의 변화를 연구하기 위하여 침전법, 음향화학적 침전법 그리고 게면활성제를 첨가한 음향화학적 침전법으로 나노 입자를 합성하였고, X-선 회절실험을 통하여 마그네타이트가 합성된 것을 확인하였다. 침전법, 음향화학적 침전법으로 합성한 입자의 크기는 계면활성제를 첨가한 음향화학적 침전법으로 합성한 입자보다 크게 얻어졌고, 초음파 출력이 증가 할수록 크기는 증가하였다. 계면활성제로 올레인 산을 첨가한 음향화학적 기법에서는 게면활성제의 농도에 따라 입자 크기를 선택적으로 조절하여 합성할 수 있었고, 단순 침전법이나 음향화학적 기법에서 보다 생성되는 입자의 크기 분포가 좁게 나타났다. 마그네타이트 나노 입자들의 자기적 특성을 SQUID를 통하여 분석한 결과, 실온에서 모두 초상자성 거동을 보이는 것으로 나타났다.

• 한국분말재료학회지
• /
• 제23권6호
• /
• pp.437-441
• /
• 2016

Recently, the grain boundary diffusion process (GBDP), involving heavy rare-earth elements such as Dy and Tb, has been widely used to enhance the coercivity of Nd-Fe-B permanent magnets. For example, a Dy compound is coated onto the surface of Nd-Fe-B sintered magnets, and then the magnets are heat treated. Subsequently, Dy diffuses into the grain boundaries of Nd-Fe-B magnets, forming Dy-Fe-B or Nd-Dy-Fe-B. The dip-coating process is also used widely instead of the GBDP. However, it is quite hard to control the thickness uniformity using dip coating. In this study, first, a $DyF_3$ paste is fabricated using $DyF_3$ powder. Subsequently, the fabricated $DyF_3$ paste is homogeneously coated onto the surface of a Nd-Fe-B sintered magnet. The magnet is then subjected to GBDP to enhance its coercivity. The weight ratio of binder and $DyF_3$ powder is controlled, and we find that the coercivity enhances with decreasing binder content. In addition, the maximum coercivity is obtained with the paste containing 70 wt% of $DyF_3$ powder.

• Journal of Microbiology and Biotechnology
• /
• 제27권2호
• /
• pp.297-305
• /
• 2017

The use of peroxidase in the nitration of phenols is gaining interest as compared with traditional chemical reactions. We investigated the kinetic characteristics of phenol nitration catalyzed by horseradish peroxidase (HRP) in an aqueous-organic biphasic system using n-butanol as the organic solvent and ${NO_2}^-$ and $H_2O_2$ as substrates. The reaction rate was mainly controlled by the reaction kinetics in the aqueous phase when appropriate agitation was used to enhance mass transfer in the biphasic system. The initial velocity of the reaction increased with increasing HRP concentration. Additionally, an increase in the substrate concentrations of phenol (0-2 mM in organic phase) or $H_2O_2$ (0-0.1 mM in aqueous phase) enhanced the nitration efficiency catalyzed by HRP. In contrast, high concentrations of organic solvent decreased the kinetic parameter $V_{max}/K_m$. No inhibition of enzyme activity was observed when the concentrations of phenol and $H_2O_2$ were at or below 10 mM and 0.1 mM, respectively. On the basis of the peroxidase catalytic mechanism, a double-substrate ping-pong kinetic model was established. The kinetic parameters were ${K_m}^{H_2O_2}=1.09mM$, ${K_m}^{PhOH}=9.45mM$, and $V_{max}=0.196mM/min$. The proposed model was well fit to the data obtained from additional independent experiments under the suggested optimal synthesis conditions. The kinetic model developed in this paper lays a foundation for further comprehensive study of enzymatic nitration kinetics.

• 한국응용과학기술학회지
• /
• 제33권1호
• /
• pp.23-29
• /
• 2016

육방정계 우르자이츠형의 산화아연은 n형 반도체로써 3.37 eV의 넓은 밴드갭 에너지와 60 meV의 큰 엑시톤 바인딩 에너지를 가진 물질이다. 가스센서, 발광 다이오드, 염료 감응 태양 전지, 염료오염의 분해 등의 넓은 범위에서 활용이 가능하다. 합성 시 마이크로파 수열합성법을 사용하게 되면 높은 수율, 빠른 반응속도, 에너지 절약의 장점이 있다. 아민첨가제는 수산이온 생성 및 킬레이트 효과로 인해 산화아연 입자 형상을 조정하는 역할을 한다. 본 논문에서는 전구체로는 질산아연육수화물을 사용하였고, 형상조정제로는 에탄올아민, 에틸렌디아민, 디에틸렌트리아민, 헥사메틸렌테트라민을 사용하였다. 수산화소듐을 사용하여 용액을 pH 11로 조정하였다. 합성된 산화아연은 별모양, 막대형, 꽃모양, 원추형의 다양한 형상을 확인할 수 있었다. 아민첨가제에 의한 물리 화학적 특성과 광학적 특성을 분석하기 위해 XRD, SEM, EDS, FT-IR, UV-vis 스펙트럼, PL 스펙트럼을 사용하였다.