• Magazine of the Korean Society of Agricultural Engineers
• /
• v.39 no.5
• /
• pp.86-96
• /
• 1997

The arrangement of small streams in rural area, in the past times, attached importance to the prevention of flood damage through the straightening and lining of streams. Recently, the way of small stream arrangement is introducing the idea of water friendly environment or friendly space. As a result, there has been much concern with water favorable river management model which may lead to control flood. However, it is very difficult to develop a model applicable to all types of rivers, since each river has different flow velocity, flow amount and unique ecological characteristics. In this study, photo processing technique, one of landscape simulation methods, has been adopted because it helps to visually express and comprehensively evaluate pre and post scenery and easily applicable. Some important guideline and technique for the planning of small stream landscape arrangement are mentioned in this study. The simulation system for acquiring water favorable space and arranging landscapes needs to develop database which can forecast various types of landscape. It may also be used for the bases of planning and designing river environment arrangement. Computer aided image processing system enables to make selective planning in river environment arrangement. It may also enables to develop the methods for river environment development, ecology conservation, and multipurpose space utilization. Moreover, it makes economic river arrangement by applying river environment arrangement methods relevant to geographical characteristics. There are some limitations in this study, such as shortage of exact investigation on the stream direction and velocity in landscape arrangement. Continuous monitoring and research may be required to develop techniques through the application of computer graphics and digital image processing.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.7
• /
• pp.1335-1341
• /
• 2016

For the safety of train operation, monitoring & supervisory systems for train, signal, power, communication and facilities is operating independently in another place, so, its sensors are interdependently connected from each other to transfer gathering datas of sensing to control center. A Goal of Real-time railway safety supervision system is to improve the safety oversight efficiency and to prevent accidents by means of hazard prediction based on big data by integrating all of safety sensing data in wayside of railway, and the System is requested acquisition of all of sensing data of safety. So, we need special method of protocol converting for the purpose of integrating all of detecting data concerning safety without any changing application. In this paper we investigate the existing converting method in communication field, and propose a new progress to converting protocol adding function of transfer using XML file, and implemented this algorithm, and tested with example packets, finally.

• Atmosphere
• /
• v.23 no.4
• /
• pp.453-470
• /
• 2013

As a part of the KIAPS Observation Processing System (KOPS), we have developed the modules of satellite radiance data pre-processing and quality control, which include observation operators to interpolate model state variables into radiances in observation space. AMSU-A (Advanced Microwave Sounding Unit-A) level-1d radiance data have been extracted using the BUFR (Binary Universal Form for the Representation of meteorological data) decoder and a first guess has been calculated with RTTOV (Radiative Transfer for TIROS Operational Vertical Sounder) version 10.2. For initial quality checks, the pixels contaminated by large amounts of cloud liquid water, heavy precipitation, and sea ice have been removed. Channels for assimilation, rejection, or monitoring have been respectively selected for different surface types since the errors from the skin temperature are caused by inaccurate surface emissivity. Correcting the bias caused by errors in the instruments and radiative transfer model is crucial in radiance data pre-processing. We have developed bias correction modules in two steps based on 30-day innovation statistics (observed radiance minus background; O-B). The scan bias correction has been calculated individually for each channel, satellite, and scan position. Then a multiple linear regression of the scan-bias-corrected innovations with several predictors has been employed to correct the airmass bias.

• The Journal of Korean Association of Computer Education
• /
• v.3 no.1
• /
• pp.127-134
• /
• 2000

Distance education, which emerged under the influence of both the rapid development of hi-tech information technology and the constructivism theory of learning, enables learners to acquire knowledge and skills needed by monitoring their learning process for themselves. Emphasis on web-based distance education and contructivism as a basis of learner-centered education does not mean that those education systems are performed without teachers or in noninterference. This study proposes a model of distance education system in which learners are taught in various levels of learning with the help of teacher agents. In the model teacher agents produce the learners' respective learning model considering the information on individual learners and also control the progress to the next step of learning with the result of the evaluation of learning accomplishment. The model of distance education system suggested in this study is able to help solve the problem that the learning resources web-based distance education provides were used only as objects of web search and to supply a basis of realizing learner-centered education.

• Journal of the Korea Convergence Society
• /
• v.8 no.10
• /
• pp.249-255
• /
• 2017

The domestic tourism industry mostly relies on quantitative surveys for customer satisfaction. However, customer participation of the questionnaires is extremely low and the improvement of the dissatisfactory factors is not being performed promptly. In this paper, we propose a new topic map system and prove its empirical effectiveness to improve the accuracy of customer feedback information and the efficiency of the analysis process. The topic map system is a system for analyzing large amounts of customer feedback data in real time. It uses text mining and ontology techniques by integrating data collected over a certain period from real-time SNS and quantitative data obtained from existing survey systems. The effect after improving the analyzed factors of dissatisfaction is also a new and innovative evaluation system for monitoring customer satisfaction in real time. The classification based on this integrated data is a classification system that is specific to the product or the customer. According to this classification, it is possible to measure the effect of the recognition and improvement of the complaint factor in real time on the topic map system. This provides a sophisticated prioritization of the improvement factors and enables customer satisfaction quality control as a PDCA feedback system. In addition, the survey period and costs are greatly shortened, and responses can be more precise to the existing survey method. As a practical application, this system is applied to the largest H travel agency in Korea to prove the accuracy and efficiency of the proposed system.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.6
• /
• pp.32-40
• /
• 2015

In this paper, the optimum antenna placement is analyzed by considering the interference between airborne antennas mounted on the unmanned aerial vehicle(UAV). The analysis is implemented by selecting the antennas that the distance and operational frequency band between airborne antennas is close to each other among the omni-directional antennas. The analyzed antennas are the control datalink, TCAS(Traffic Collision & Avoidance System), IFF(Identification Friend or Foe), GPS(Global Positioning System), and RALT(Radar ALTimeter) antennas. There are three steps for the optimum antenna placement analysis. The first step is selecting the antenna position having the optimum properties by monitoring the variation of radiation pattern and return loss by the fuselage of UAV after selecting the initial antenna position considering the antenna use, type, and radiation pattern. The second one is analyzing the interference strength between airborne antennas considering the coupling between airborne antennas, spurious of transmitting antenna, and minimum receiving level of receiving antenna. In case of generating the interference, the antenna position without interference is selected by analyzing the minimum separation distance without interference. The last one is confirming the measure to reject the frequency interference by the frequency separation analysis between airborne antennas in case that the intereference is not rejected by the additional distance separation between airborne antennas. This analysis procedure can be efficiently used to select the optimum antenna placement without interference by predicting the interference between airborne antennas in the development stage.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.515-517
• /
• 2008

현재 가동 중인 원자적발전소 계측제어설비의 전원공급기를 살펴보면 인버터 또는 별도의 교류를 입력전원으로 사용한다. 직류 전원공급기들은 설비의 중요도예 따라 이중화로 구성된 설비도 있고 그렇지 않은 기기나 설비도 있다. 이중화로 구성된 전원공급기라 해도 교류 입력전원이 동일하다면 교류 입력이 상실될 때 이중화로 구성된 직류전원도 상실되어 관련계통의 가동이 정지된다. 이러한 문제점을 해결하기 위해서는 각기 다른 교류입력전원으로 동작되는 이중화전원공급기로 구성되는 것이 가장 바람직하다. 본 연구개발의 목적은 두 종의 설비에 소요되는 3종의 직류전원 공급기를 원자력 안정성등급으로 국산화하는 연구이다. 기존 제품들은 3종 모두 리니어 방식의 제품이지만, 방사선감시 계통 현장제어기의 5V로직 전원공급기와 공정제어계통 전원공급자는 전력변환효율이 높고 소형, 정량화가 가능한 SMPS(Switched Mode Power Supply) 방식으로 개발하였다. 방사선감시계통 현장제어기의 PCA(Printed Circuit Assembly) 저전압공급기는 다양한 종류의 출력전압과 저 전류형이므로 안정성 면에서 동일한 형식의 리니어 방식으로 개발하였으며 3종류 모두 출력용량을 20% 이상 향상시켰다. 또한, 논문을 통해 SMPS 방식의 전원공급기의 핵심 부품인 Control Module을 Hybrid IC형으로 자체 설계하여 성능이 우수한 제품을 지속적으로 생산할 수 있는 기틀을 마련하고자 한다.

• Korean Journal of Community Nutrition
• /
• v.11 no.3
• /
• pp.317-326
• /
• 2006

To explore the relationship between weight status and food intake pattern, the Nutrition Survey results of the 2001 National Health and Nutrition Survey were analyzed. Dietary intake data of Korean adults aged 20 to 64. years who participated in the 2001 National Health and Nutrition Survey, was used along with their demographic data. Subjects were classified into 4 groups based on the BMI value of subjects: underweight, normal, overweight and obese. For male adults, obese subjects had significantly higher mean intake of energy, protein, carbohydrates, and fat than normal subjects. In addition, obese male adults consumed more animal foods, especially more meats, than normal subjects. However, females obese subjects did not show higher intake of energy or fat. Although obese male adults showed higher energy intake, calcium and iron intake per 1000 kcal was lower than normal adults. Average calcium intake in females was low; about 70% of RDA regardless of obesity level. In addition, riboflavin and Vitamin A intake was lower in overweight and obese female than in normal females. Percentage of subjects with low fruit and vegetable intake (< 400 g per day) was also high in female subjects. These results showed that food and nutrient intake patterns of obese population were different between male and female adults. These dietary intake patterns need to be considered in developing and implementing nutrition policy and intervention programs to prevent and control obesity. Moreover, the National Survey and monitoring system should be developed for continuous and effective investigation on the relationship between obesity and dietary intake.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.5 no.1 s.9
• /
• pp.31-43
• /
• 2006

As of March 2005, the standard of traffic signal controllers became effective. The standard presents specifications and functions of a traffic signal controller which collects traffic information, sends it to the traffic control center, and controls traffic signal with adequate traffic signal timing provided by the traffic control center. Since the controllers by the previous standard lack parts compatibility and have different control functions and communication protocol, the maintenance cost has been increased. Also, some important functions like conflict detection have not worked out perfectly. To overcome these disadvantages, first of all, this standard secures hardware compatibility. Conflict detection method has been enhanced. Communication protocol to the traffic control center was included in the standard. With this standard, independent maintenance system and prompt treatment of hardware malfunctions becomes possible. Also, the unified intersection traffic control method will increase traffic safety.

• Korean Journal of Medicinal Crop Science
• /
• v.24 no.2
• /
• pp.143-151
• /
• 2016

Background: The public has increasing concerns about herbal crops owing to insufficient information on biological hazards such as foodborne pathogens. Therefore, the objective of this study is the development of a herbal crop quality control system through monitoring with biological hazard analysis. Today, it is estimated that millions of people become ill every year from food contamination. The public demands agricultural products of stable and consistent quality. Governments have the responsibility of establishing the standards, legislation and enforcement programs necessary to control food quality and safety. However, research on the biosafety of herbal crop products is still insufficient. Therefore, the implementation of monitoring systems with high standards is critical for public safety. Methods and Results: In this study, we collected 52 samples of herbal crop products, and conducted both quantitative and qualitative biological hazard analysis. With biological hazard analysis, aerobic bacteria, Staphylococcus aureus, Salmonella spp., Escherichia coli, Coliforms, and Listeria spp. could be detected. Conclusions: Herbal crops were found to be contaminated with aerobic bacteria at $3.69{\pm}0.32log\;CFU/g$. Staphylococcus aureus, Salmonella spp., Escherichia coli, Coliforms, and Listeria spp. were not detected in any of the samples. This research suggests that continuous monitoring of biological hazards is required to improve the quality of herbal crops.