In chip plating, several parameters must be taken into consideration. Current density, solution concentration, pH, solution temperature, components volume, chip and media ratio, barrel geometrical shape were most likely found to have an effect to the process yields. The 3 types of barrels utilized in chip plating industry are the conventional rotating barrel. vibrational barrel (vibarrel), and the centrifugal type. Conventional rotating barrel is a close type and is commonly used. The components inside the barrel are circulated by the barrel's rotation at a horizontal axis. Process yield has known to have higher thickness deviation. The vibrational barrel is an open type which offers a wide exposure to electrolyte resulting to a stable thickness deviation. It rotates in a vertical axis coupled with multi-vibration action to facilitate mixed up and easy transportation of components, The centrifugal barrel has its plated work centrifugally compacted against the cathode ring for superior electrical contact with simultaneous rotary motion. This experiment has determined the effect of barrel vibration intensity to the plating thickness distribution. The procedures carried out in the experiment involved the overall plating process., cleaning, rinse, Nickel plating, Tin-Lead plating. Plating time was adjusted to meet the required specification. All other parameters were maintained constant. Two trials were performed to confirm the consistency of the result. The thickness data of the experiment conducted showed that the average mean value obtained from higher vibrational intensity is nearer to the standard mean. The distribution curve shown has a narrower specification limits and it has a reduced variation around the target value, Generally, intensity control in vi-barrel facilitates mixed up and easy transportation of components, However, it is desirable to maintain an optimum vibration intensity to prevent solution intrusion into the chips' internal electrode. A cathodic reaction can occur in the interface of the external and internal electrode. $2HD{\;}+{\;}e{\;}{\rightarrow}20H{\;}+{\;}H_2$ Hydrogen can penetrate into the body and create pressure which can cause cracks. At high intensity, the chip's motion becomes stronger, its contact between each other is delayed and so plating action is being controlled. However, the strong impact created by its collision can damage the external electrode's structure thereby resulting to bad plating condition. 1 lot of chip was divided into two equal partion. Each portion was loaded to the same barrel one after the other. Nickel plating and tin-lead plating was performed in the same station. Portion A maintained the normal barrel vibration intensity and portion B vibration intensity was increased two steps higher. All other parameters, current, solution condition were maintained constant. Generally, plating method find procedures were carried out in a best way to maintained the best plating condition. After plating, samples were taken out from each portion. molded and polished. Plating thickness was investigated for both. To check consistency of results. 2nd trial was done now using different lot of another characteristics.
연구목적 : 국소재발을 줄이면서 합병증을 최소화하기 위한 방법으로 제안된 수술중 방사선 치료(IORT)는 육안으로 치료 범위를 확인 할 수 있는 이점이 있으나 조사 선축의 각도와 치료과 치료면의 거리 등이 조금만 틀려도 조사야의 선량에 차이가 있을 뿐 아니라 조사방사선의 동질성(Homogeneity)에도 영향을 미치게 된다. 직장암의 경우 조사 부위가 대부분에서 3차적인 경사면을 가진 골반벽이 됨으로 치료 cone의 정확한 Set-up은 적절한 gantry의 회전과 치료대(treatment couch)의 tilting이 조화되어야만 가능하다. gantry의 회전은 어느 기계에서나 가능하나 치료대의 tilting은 대부분에서 불가능함으로 영남대학교 의료원 치료 방사선과에서는 상하로의 tilting이 30$ ^{\circ} $까지 가능할 뿐 아니라 기존 치료대에 장착과 탈거가 5분이내에 쉽게 될수 있는 치료대를 개발하기 위함. 재료 및 방법 : IORT 치료대는 2cm 두께의 bekelite로 2cm 두께의 sponge를 leather로 싸서 수술대에 피나 기타용액이 스며들지 못하게 하였고 전체의 무게가 45kg을 넘지 않도록 하여 치료대의 양끝에 장착할 경우, 치료대의 수평이 유지되도록 하였다. 상하 경사각은 30$ ^{\circ} $를 유지토륵 하였고 lithotomy position에서도 side handle을 사용하여 경사각 조절이 가능토록 하였다. 결과 및 결론 : 1992년 9월부터 1993년 3월까지 여러번의 수정을 거친 후 대장 직장암의 IORT에 사용하고 있으며, 3차원적인 골반벽에의 정확한 접근(approach)이 가능할 뿐 아니라 기존 방사선 치료대에 장착과 탈거가 5분 이내에 가능하며, 상하 경사각 30$ ^{\circ} $ 정도로의 조절이 수술이나 마취에 전혀 영향을 주지 않는 상태에서 자유로이 조절 되므로 향후 대장직장암의 IORT에 크게 공헌할 수 있을 것으로 사료됨.
모발이 부스스하게 떠서 부피가 커졌거나 정발된 모발에서 이탈한 잔머리를 프리즈 모발이라고 하는데 어떤 요인이 프리즈 현상을 일으키는지에 대해서는 알려져 있지 않다. 모발 내부 지질은 탄력, 인장강도 등 물성과 관계되는데, 프리즈에 관해서는 인종 간 연구에서 프리즈 모발이 많은 아프리칸 모발과 지질량과의 관계가 보고되어 있다. 모발 외부에 손상을 입히지 않고 모발의 내부 지질량을 조절하는 방법은 세정에 의한 소실이 유일하지만 세정횟수와 지질 소실량은 비례하지 않는다. 본 연구에서는, 다양한 컨디셔닝 폴리머와 극성이 서로 다른 오일을 사용한 샴푸 처방으로 모발을 세정하여 모발 내부 지질량을 분석하였다. 그 결과 오일의 극성도가 높을수록 지질량이 많이 보존되는 것을 확인하였다. 이 방법을 인디언 프리즈 모발에 적용하여 프리즈 정도를 평가한 결과 지질량이 적은 모발일수록 부피가 커지는 볼륨 프리즈 정도가 심하다는 것을 발견하였다. 반면에 잔머리 프리즈 모발 부피는 지질량이 많은 모발에서 더 넓게 관찰되었다. 아울러 모발 표면 마찰력은 처리한 오일에 따른 차이가 없었기 때문에 모발 프리징은 오일간 점착력에 영향을 받지 않고 모발 내 지질량의 영향을 받고 있음을 알 수 있었다. 따라서 본 연구는 안티 프리즈 기술을 구현하는데 모발 내부 지질 조절이 중요한 해법이 될 수 있음을 제시한다.
The air abrasive technique is a non-mechanical method by which teeth are treated before restoration and stains and calculi are removed from tooth surfaces using the kinetic energy of small particles. The air abrasive technique in dentistry was first introduced in the 1950's with as instrument called 'Airdent'. But, as the main restorative materials of the period were amalgam and gold, and the instrument's inability to control the flow of particles caused the particles to be spread throughout the clinics, widespread use was not possible. In the 1990's, as these techincal problems were solved and more interest in new restorative materials rose in an effort to preserve sound tooth structure, new developements took place in instruments related to the air abrasive technique. The air abrasive technique produces less pressure, vibration and heat that might cause patient discomfort and facilitates the preservation of sound tooth structure. It also reduces the need for anesthesia and is less harmful to the pulp. Other advantages include increase in dentin bonding strength of composite resin, lower possibility of saliva contamination and maintenance of a dry field. But there is not direct contact between the nozzle and the tooth, the operator cannot use his or her tactile sense and must rely solely upon visual input. Other disadvantages are: the tooth preparation depends on the operator's ability; alpha-alumina particles, after bouncing off the tooth surface, cause damage to dental mirrors; the equipment is expensive and takes up a certain amount of space in the clinic. The author conducted case report using the air abrasive technique on patient visiting the Department of Pediatric Dentistry at Seoul National University Dental Hospital and arrived at the following conclusions. 1. The tooth preparation capability of different air abrasive devices varied widely among manufacturers. 2. It was more effective in treating early caries lesions and stains compared to lesions where caries had already progressed to produce soft dentin. 3. The cold stream and noise caused by the evacuation system was a major cause of discomfort to pediatric patients. 4. As there is no direct contact with tooth surface when using the air abrasive technique for tooth preparation, considerable experience and skill is required for proper tooth preparation.
Flexible organic light emitting diodes (F-OLEDs) requires excellent moisture permeation barriers to minimize the degradation of the F-OLEDs device. Specifically, F-OLEDs device need a barrier layer that transmits less than $10^{-6}g/m^2/day$ of water and $10^{-5}g/m^2/day$ of oxygen. To increase the life time of F-OLEDs, therefore, it is indispensable to protect the organic materials from water and oxygen. Severe groups have reported on multi-layerd barriers consisting inorganic thin films deposited by plasma enhenced chemical deposition (PECVD) or sputtering. However, it is difficult to control the formation of granular-type morphology and microscopic pinholes in PECVD and sputtering. On the contrary, atomic layer deoposition (ALD) is free of pinhole, highly uniform, conformal films and show good step coverage. Thus, $Al_2O_3/TiO_2$ multi-layer was deposited onto the polyethersulfon (PES) substrate by electron cyclotron resonance atomic layer deposition (ECR-ALD), and the water vapor transmission rates (WVTR) were measured. WVTR of moisture permeation barriers is dependent upon density of films and initial state of polymer surface. A significant reduction of WVTR was achieved by increasing density of films and by applying low plasma induced interlayer on the PES substrate. In order to minimize damage of polymer surface, a 10 nm thick $TiO_2$ was deposited on PES prior to a $Al_2O_3$ ECR-ALD process. High quality barriers were developed from $Al_2O_3$ barriers on the $TiO_2$ interlayer. WVTR of $Al_2O_3$ by introducing $TiO_2$ interlayer was recorded in the range of $10^{-3}g/m^2.day$ at $38^{\circ}C$ and 100% relative humidity using a MOCON instrument. The WVTR was two orders of magnitude smaller than $Al_2O_3$ barriers directly grown on PES substrate without the $TiO_2$ interlayer. Thus, we can consider that the $Al_2O_3/TiO_2$ multi-layer passivation can be one of the most suitable F-OLEDs passivation films.
2009년 5월에 경북 포항시 북구 흥해읍 중성리 도로개설 공사현장에서 발견된 중성리신라비는 부정형 암석의 한 면에 200여 개의 글자가 음각되어 있으며, 지금까지 알려진 신라시대 비석 중 가장 오래된 영일냉수리신라비보다 먼저 조성된 것으로 추정되고 있다. 중성리신라비의 구성암석은 흑운모가 다량 함유된 흑운모화강암이며 냉수리신라비는 장석과 각섬석이 반정을 가지고 있는 화강섬록반암으로 추정된다. 이 암석에서는 유색광물의 집합체인 포획암과 작고 불규칙한 공동이 관찰되며, 신광면 일대에 분포하는 흑운모화강암 및 기계면 일대에 분포하는 화강섬록반암과 유사한 암석으로 판단된다. 중성리신라비와 냉수리신라비에 나타나는 훼손현황은 변색에 의한 오염과 부분적으로 관찰되는 균열과 부재의 탈락이다. 이는 비의 안정성에는 특별한 영향은 없을 것으로 보이나 중성리신라비의 전면에 걸쳐 발생된 흑색 및 갈색 변색은 미관을 해치는 요인으로 작용하고 있다. 중성리신라비에서 관찰되는 흑색변색은 상대적으로 Mn과 Fe이 높은 농도를 보였으며, 갈색변색 부분은 Fe가 높게 측정되었다. 중성리신라비와 냉수리신라비의 초음파속도 분포 경향과 전체적인 풍화도를 비교 분석해보았을 때, 두 비 모두가 중간풍화단계(MW)에 해당되나 중성리신라비가 넓은 초음파 속도 분포를 보이며 평균적으로 다소 낮게 나타났다. 이는 최근 발견되기까지 아무런 보호시설 없이 매장 및 자연환경에 노출되어 있었기 때문으로 판단되며 향후 보존처리와 더불어 적절한 보존환경을 마련하는 등 관리가 필요할 것으로 사료된다.
금속은 우리 인류 문화 발전에 많은 영향을 준 재료이며, 과거에서부터 현재까지 우리 생활에 밀접한 연관이 있는 재료이다. 선사시대부터 사용해온 금속의 종류는 다양하며 우리나라의 출토 금속 유물 중 철기유물이 가장 큰 비중을 차지하고 있다. 출토 유물에서 전승 유물에 이르기까지 철기 유물들의 존재를 가장 크게 위협하는 것이 부식 진행 과정이며, 부식된 산화물을 제거하기 위해서는 현재 물리적인 제거 방법이 가장 많이 사용되고 있다. 본 논문은 부식 산화물을 제거하는 작업에 대한 내용으로 철기 유물 자체의 모재는 보호하면서 부식 산화물만을 처리하는 화학적 부식 산화물 제거제에 대하여 연구하고자 하였다. 철기 유물의 부식 산화물에 대한 보다 안전하고 효과적인 제거를 위해, 새로운 산성, 알칼리성, 중성의 산화물 제거제를 제조하고, 이의 조성을 다양하게 변화하면서 철기 유물의 부식 산화물 제거 가능성과 최적화된 조성을 찾는 것에 목표를 두고 실행하였으며 근대 유물에 적용하여 그 가능성까지를 검토하였다. 연구결과는 다음과 같다. 첫째, 산성 처리 용액의 경우 철 시편 표면에 산화된 부식물은 일부만이 제거되는 결과를 나타내었다. 둘째, 알칼리성과 중성 처리 용액의 경우 검은색의 부식물이 남은 상태였으나 이는 처리 시간과 처리 용액의 양을 증가시키면 이들도 제거되는 결과를 나타내었다. 셋째, 이 세 종류 용액은 처리 시에 모두 모재 자체에 손상을 주지 않았으며 용액의 농도와 처리 시간의 조절만으로도 유물에 따른 상황 대처가 가능하여 모재나 안정화 부식층을 보호하면서 불안정한 산화물층만을 제거할 수 있는 결과를 나타내었다.
Park, Jae-Heung;Jang, Kyung-Jun;Kim, Cheol-Hong;Lee, Yoo-Hwan;Lee, Soo-Jung;Kim, Bum-Hoi;Yoon, Hyun-Min
대한약침학회지
/
제17권3호
/
pp.40-49
/
2014
Objectives: The gastric ulcer is a common disorder of the stomach and duodenum. The basic physiopathology of a gastric ulcer results from an imbalance between some endogenous aggressive and cytoprotective factors. This study examined whether Ganoderma lucidum pharmacopuncture (GLP) would provide protection against acute gastric ulcers in rats. Methods: Sprague-Dawley rats were divided randomly into 4 groups of 8 rats each: normal, control, normal saline (NP) and GLP groups. The experimental acute gastric ulcer was induced by using an EtOH/HCl solution and the normal group received the same amount of normal saline instead of ethanol. The NP and the GLP groups were treated once with injections of saline and GLP, respectively. Two local acupoints were used: CV12 (中脘) which is the alarm point of the Stomach Meridian, and ST36 (足三里), which is the sea point of the Stomach Meridian. The stomachs from the rats in each group were collected and analyzed for gross appearance and histology. Also, immunohistochemistry staining for BAX, Bcl-2 and TGF-${\beta}1$ was performed. Results: Histological observations of the gastric lesions in the control group showed comparatively extensive damage of the gastric mucosa and necrotic lesions had penetrated deeply into the mucosa. The lesions were long, hemorrhagic, and confined to the glandular portions. The lesions were measured microscopically by using the clear depth of penetration into the gastric mucosal surface. The length and the width of the ulcer were measured and the inhibition percentage was calculated. Wound healing of the acute gastric ulcer was promoted by using GLP, and significant alterations of indices in gastric mucosa were observed. Such protection was shown by gross appearance, histology and immunohistochemistry staining for BAX, Bcl-2 and TGF-${\beta}1$. Conclusion: These results suggest that GLP administered at CV12 and ST36 can provide significant protection to the gastric mucosa against an ethanol-induced acute gastric ulcer.
화분량은 '금천' 수박을 제외하고 응화 1개당 10mg 이상이었다. '복' 수박은 1화당 화분무게가 13.8mg이었고, '스피드꿀' 수박은, 12.1mg으로 겨울철 저온기 재배에 인공수정용 화분생산 품종으로 적당한 것으로 판단된다. 유기용매 침지 후 즉시 건조된 화분발아율은 '금천' 수박이 67%로 기장 낮았고 '아폴로꿀' 수박이 92%로 가장 높았다. 유기용매에 15일간 저장했을 경우 '복' 수박 화분의 발아력이 74%로 가장 높았다. 저장 24일 후에는 5품종 모두 25% 이하의 발아율을 나타내었다. '금천'과 '삼복꿀' 수박의 화분관 신장속도는 $50{\mu}m/hr$ 미만(저장 24일)으로 다른 품종보다 낮았으며, 벌이도중 화분관이 파열되는 경우도 발생되었다. 유기용매 저장 24시간 후 화분발아율은 pentane, ethyl ether, n-hexane, ethyl acetate, acetone에서 각각 45, 39, 34, 23, 19% 순이었고 유기용매 침지시간이 길어질수록 화분활력이 급격히 감소되었다. 화분 표피는 유기용매에 저장한 시간이 길어질수록 장해를 많이 받았는데 유기용매의 종류에 따라 장해정도가 달랐다. '복' 수박이 화분량, 화분활력, 저장성이 우수하였는데 저온기 착과율 증진을 위한 화분생산 품종으로 보여진다.
외국에서 도입한 블루베리의 내한성을 평가하고, 목재수분계측기가 월동 중 블루베리 가지의 동해피해를 간편하고 신속하게 진단하는데 활용할 수 있는지를 알아보기 위하여 수행되었다. 월동 중 블루베리의 가지의 고사율은 0~100%로 다양하게 나타나 품종별 내한성의 차이가 컸다. 블루베리 가지의 저온처리에 따른 TTC 검정에서 품종별 OD값은 $-40^{\circ}C$ < $-21^{\circ}C$ < $4^{\circ}C$ 순으로 처리온도가 낮을수록 낮게 나타났다. 블루베리 가지의 저온처리에 따른 가지절단면의 색의 검정은 가지고 사율에 의한 내한성과 다른 결과와 차이가 있었다. 목재수분계측기에 의해 측정된 살아있는 블루베리 가지의 월동 중 최저 수분함량은 약 15%였으며, 월동 중 블루베리 가지의 위치별 수분함량은 나무 아랫부분일수록 높고 가지 끝으로 갈수록 낮았으나, 봄으로 접어들면서 가지 끝의 수분함량이 점점 높아져 20~40% 범위로 측정되었다. 월동 중 동해피해를 받은 가지는 점점 건조되어 수분함량이 5% 이하로 낮아졌다. 동해를 받은 블루베리 가지의 수분함량은 14% 수준 이하일 것으로 추정되며, 목재수분계측기가 블루베리 가지의 동해피해를 현장에서 신속하게 진단하는데 활용될 수 있을 것으로 기대된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.