• Korean Journal of Microbiology
• /
• v.8 no.4
• /
• pp.173-177
• /
• 1970

In this study the effect of aerosol for the control of the parasitic Aspergilli in the sericultural room was investigated. The results obtained are summarized as follows : 1) The aerosol of PPS-A and PPS-B were quite effective for the control of parasitic Aspergilli in the room of sericulture, while the solution of formalin and chlor kalk, on the other hand, were inconclusive. 2) The activities of the aerosol of PPS-A and PPS-B are more effective when it is applied on the upper part of the room than the lower.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.9 no.4
• /
• pp.1-9
• /
• 2001

The temperature and moisture distributions in a dry room with a heat and moisture source -i.e., workers- are studied numerically by using a standard $k-\varepsilon$ turbulence model. In order to evaluate the effectiveness of heat and moisture ventilation inside the room, the heat removal capacity and the moisture exhaust efficiency are introduced. The effectiveness of ventilation control is analyzed by evaluating the temperature and humidity distributions in the room quantitatively. It is found that the mean absolute humidity inside the room is almost constant regardless of the models and the heat generation rates in this study range. This results from the fact that the moisture generation by the workers was relatively small. Through the modification of the design, 40% improvement in critical decay time was achieved.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.6
• /
• pp.1037-1045
• /
• 2001

This research is done to design and manufacture prototype clean room garments to improve the product yield of the clean room processing. To assist the research, other papers and references on the same subject were collected for analysis. Also the researcher made interviews with the workers at the clean room. The prototype garments made for this project was compared against the commercially available clean room garments used in the industry. A set of test was conducted to measure particle release from the garments. The prototype clean room garments was manufactured after having considered all the aspects stated above, and tested for the level of particle release. The test subjects performed 4 different movements(marching, arms stretch, squat and rise, and jogging) while wearing the prototype garments and commercially available clean room garments. Particle counts produced by each movement were measured. The data collected was statistically analyzed. The followings are the result of the test. 1) Overall, the prototype garments yielded less particle release.(p<0.001) 2) It showed greatest difference of particle counts for jogging(p<0.001) and squat and rise(p<0.001). In the arms stretch test. the prototype garments was also more effective in controling the particle, however, in the marching test. no significant difference was detected. 3) The prototype garments had less particle release in upper(p<0.001), middle(p< 0.001), and lower level(p<0.01) than the commercially available clean room garments. Manufacturing a new fabric for the clean room processing is important, but this research proves that the design of the clean room garments also determines the efficiency garments in the particle control. Therefore the same fabric can perform differently according to how it is designed. Improving the design will also improve the 7article control and reduce the cost of research. Eventually, the manufacturers will increase the product yield.

• Fire Science and Engineering
• /
• v.31 no.4
• /
• pp.52-58
• /
• 2017

This study investigated the pressure difference distribution and the flow characteristics among room, ancillary room, and stair case by carrying out the numerical simulations on the air flow inside the pressurized air supply smoke control system. Numerical simulations were conducted to analyze pressure and velocity distribution of compartments by pressurized air supply for the air-leakage test facility which was built to measure the effective leakage area. In this study, the leakage of air was considered by locating the narrow slit onto fire door and window of room. Simulated results using this method precisely followed the previous experimental results for the pressure differences between the stair case and ancillary room. Predicted results showed that the local leakage of air rarely affected the overall flow pattern and pressure distribution. Although the average velocity over the door between room and ancillary room satisfied the regulation for fire safety, it was certified the unsafe outflow to ancillary room could be occurred in the local position such as the upper part of the door.

• Journal of radiological science and technology
• /
• v.45 no.3
• /
• pp.233-239
• /
• 2022

In the radiology department, where radiation is used in medical institutions to perform examinations with various equipment, the field of surgical treatment is the intervention angiography room. Accordingly, strict infection control is required. The purpose of this study was to determine the contamination status by detecting pathogens before and after disinfection in the intervention angiography room, and to determine the degree of death by using a disinfectant, sodium dichloride isocyanurate, which is mainly used in the intervention angiography room. The subjects were 10 medical institutions of general hospital level or higher with an intervention angiography room in the P city, and 12 places with high contact frequency during examinations and procedures were sampled and requested to an analysis institution. As for the sample collection method, up/down, left/right directions were used to increase precision. Before disinfection, all procedures were completed, and after disinfection, exposure was performed using a disinfectant for at least 10 minutes, and detection was performed using a transport medium. As a result, in the pathogen analysis, most pathogens were detected in a humid environment or in a place with high contact frequency for microorganisms to thrive. The detected pathogens were found in the general environment or were human flora. It is a pathogen that does not cause disease under normal healthy host conditions. However, it was found to be an opportunistic infection that causes opportunistic infection depending on the case or situation in which the body's resistance is weakened. In addition, as a result of using the disinfectant mainly used in the intervention angiography room, it was found that more than 93.3% of them died. Therefore, the data of this study will be used as good basic data for the evaluation of pathogens in the intervention angiography room and will be of great help in infection control.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.10
• /
• pp.947-959
• /
• 2001

We propose a control scheme to control the indoor zone temperature via variable air volume (VAV) unit. To control the room temperature, state space model of the conditioned zone which is partitioned into nine artificial sectional regions is derived. The nonlinearity of the damper motion and actuator are considered for the practical use in the state space system description. The temperature control of the room temperature is performed by manipulating the degree of openness of the damper in relation to the local room temperature and the supplied air flow rate. In general, since a local temperature in the conditioned zone is measured, it is required to estimate the temperature values in each regions for the precise temperature control. We thus design a state observer to estimate the regional temperature, and use these values in the controller. The overall control system consists of the state observer based state feedback with the integral control. We compared the control results of the proposed scheme with those of cascade proportional and integral (PI) control, and showed that the scheme achieved precise control of the conditioned system.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.1306-1311
• /
• 2009

In recent semiconductor manufacturing clean rooms, in order to improve clean room air quality, air washers are used to remove airborne gaseous contaminants such as $NH_3$, SOx and organic gases from the outdoor air introduced into clean room. Meanwhile, there is a large amount of exhaust air from a clean room. From an energy conservation point of view, heat recovery is therefore useful for reducing the outdoor air conditioning load for a clean room. Therefore it is desirable to recover heat from the exhaust air and use it to reheat the outdoor air. In the present study, numerical analysis and experiment was conducted to simulate the amount of energy reduction of exhaust air heat recovery type air washer system. The present numerical results showed good agreement with the results of the experimental data.

• Journal of Korean Critical Care Nursing
• /
• v.6 no.2
• /
• pp.1-11
• /
• 2013

Purpose: The purposes of this study were to examine a attitude, subjective norm, perceived behavior control, intention to report child abuse and to identify predictors of emergency room (ER) nurses' intention to report child abuse cases. Methods: A total of 364 nurses in ER participated in this study. Data were collected by self-administered questionnaire and analyzed with descriptive statistics, t-test or ANOVA, Pearson correlation, and stepwise multiple regression analysis. Results: 84.1 % of emergency room nurses reported feeling of obligation to report child abuse. Attitude, subjective norm, and perceived behavior control were positively correlated with intention to report child abuse. Intention to report child abuse was predicted by emergency room nurse's attitude, perceived behavior control, subjective norm, ER nurse career, and recognition as a reporting obligator. Conclusion: Child abuse education program should be developed to help ER nurses to report child abuse case and positive attitude toward reporting the cases.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.2 s.107
• /
• pp.141-148
• /
• 2006

Korean traditional houses have been evolved and developed in many years, adopting the natural environment to control exterior conditions. These control method are various Passive system of using natural materials, considering micro climate, building lay out, and these system are much natural and ecological to make the comfortable indoor climate than active systems of the present houses. This study aims to analyzed the acoustical characteristics of Korean traditional houses varied with lay out and floor plan to reflect the way of control for environmental condition. The reverberation time and level difference between rooms of the main living room and other main floored room, master room and kitchen are measured in each houses. As a result, the reverberation time of Korean traditional rooms are below 0.6 second, and the sound insulation performance of Korean traditional door are mostly very low grade with D-15. The level difference between rooms are low grade not to meet minimum class except between main living room and master room away from main living building. These above results show that our traditional house are much more emphasized seeking visual privacy of rooms than aural privacy.

• Journal of the Ergonomics Society of Korea
• /
• v.36 no.3
• /
• pp.213-219
• /
• 2017

Objective: The present study identified the minimum legible text size by an experiment for eight combinations of background and text colors, which will be used in designing visual information on group-view display (GVD). Background: Information on minimum legible text size is needed to design the visual information presented on GVD in a radioactive waste control room. Method: The experiment was conducted for 22 male participants (age: mean = 37, SD = 6.7; visual acuity: over 0.8) who were recruited by considering demographic characteristics of current control room operators. Eight combinations of background and text colors were considered and the minimum legible text size was determined for each combination by applying the method of limits, one of psychophysical methods. Results: The minimum legible text size was significantly different in accordance with the combination of background and text colors. Statistical analysis results showed that luminance contrast and color contrast between background and text influenced the minimum legible text sizes. Conclusion: This study concluded that the minimum legible text size is 8 minute of arc for various combinations of background and text colors. Application: The minimum legible text size identified in the present study can be utilized in designing visual information on GVD at the main control room in a radioactive waste facility.