• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.11
• /
• pp.1976-1996
• /
• 2011

Cognitive radio (CR) MAC protocol provides access control of unused spectrum resources without causing interference to primary users. To achieve this goal, in this paper a TDMA based cooperative multi-channel cognitive radio MAC (MCR-MAC) protocol is proposed for wireless ad hoc networks to provide reliable protection for primary users by achieving cooperative detection of incumbent system signals around the communication pair. Each CR node maintains transmission opportunity schedules and a list of available channels that is employed in the neighbor discovery period. To avoid possible signal collision between incumbent systems and cognitive radio ad hoc users, we propose a simple but efficient emergency notification message exchanging mechanism between neighbor CR nodes with little overhead. Our simulation results show that the proposed MCR-MAC can greatly reduce interference with primary users and remarkably improve the network throughput.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.5 no.1
• /
• pp.7-17
• /
• 2010

ITS(Intelligent Transport System) as things are used for Broadcast service using TDMB/TPEG/NAVI rather than personal seamless service. It is attaching weight to Traffic information gathering, Charging, Settlement service. This research is applied to improve DCCP(Datagram Congestion Control Protocol) which has function as protecting data and preserving message boundary. The improving method is like that we solve data trust in UDP because Connection and Transmission overhead in UDP is less than in TCP. We fix the data loss which is generated from unordered delivery section of IP base wireless service by using DCCP protocol. We guarantee of connection with OBE(On-Board Equipment) and reliance about transmission of data by complement to mapping table and multi-hoping. Finally, We evaluate the performance about transmission of IP based data. We constructed a test-bed near research center for this test.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.18 no.4
• /
• pp.151-157
• /
• 2023

RPL (IPv6 Routing Protocol for Low-power Lossy Network) is a standardized routing protocol for LLNs (Low power and Lossy Networks) by the IETF (Internet Engineering Task Force). RPL creates routes and builds a DODAG (Destination Oriented Directed Acyclic Graph) through OF (Objective Function) defining routing metrics and optimization objectives. RPL supports a leaf mode which does not allow any child nodes. In this paper, we propose INFRA-RPL which provides a dynamic leaf mode functionality to a leaf node with the mobility. The proposed protocol is implemented in the open-source IoT operating system, Contiki-NG and Cooja simulator, and its performance is evaluated. The evaluation results show that INFRA-RPL outperforms the existing protocols in the terms of PDR, latency, and control message overhead.

• Journal of KIISE:Information Networking
• /
• v.28 no.4
• /
• pp.559-569
• /
• 2001

With the growth of the Internet, applications using the reliable multicast protocol are increasing. Two important requirements of reliable multicasting are reliability and scalability. To enhance scalability, many methods have been proposed. A typical method is a local recovery scheme. This paper proposes a new stable and effective protocol with the following features. The first is to apply the discipline of the separations of concerns to NAK message. By dividing the functions of the NAK message into the error recovery request and the NAK-suppression, each function can be optimized. Second, a local representative, which is selected gradually and distributively, executes error recovery in somewhat deterministic manner. Finally, by dynamically adjusting the TTL value of the control message, the error recovery domain can be optimized. The proposed scheme has been implemented and experimented on Network Simulator. Compared to the existing schemes, the performance results show that scalability has not only been enhanced but also error recovery time and network overhead have been reduced.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.3
• /
• pp.35-40
• /
• 2014

Many researches have been conducted to achieve improvement in distributed system that connects multiple computer systems via communication lines. Among others, the load balancing and file migration are considered to have significant impact on the performance of distributed system. The dynamic file migration algorithm common in distributed processing system involved complex calculations of decision function necessary for file migration and required migration of control messages for the performance of decision function. However, the performance of this decision function puts significant computational strain on computer. As one single network is shared by all computers, more computers connected to network means migration of more control messages from file migration, causing the network to trigger bottleneck in distributed processing system. Therefore, it has become imperative to carry out the research that aims to reduce the number of control messages that will be migrated. In this study, the learning automata was used for file migration which would requires only the file reference-related information to determine whether file migration has been made or determine the time and site of file migration, depending on the file conditions, thus reflecting the status of current system well and eliminating the message transfer and additional calculation overhead for file migration. Moreover, mathematical model for file migration was described in order to verify the proposed model. The results from mathematical model and simulation model suggest that the proposed model is well-suited to the distributed system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.12
• /
• pp.817-821
• /
• 2014

As users generate lots of contents independently of time and places anytime and anywhere together with a rapid development of mobile wireless communication technologies and an explosive dissemination of smart devices, content centric networking (CCN) has emerged as a new networking architecture. However, as CCN is based on one to one message exchanges, it is not appropriate for ad hoc network environment that has frequent network topology changes, which results in high control overhead and low transmission throughput. So, this paper proposes the new content sharing methods using group interest messages in CCN ad hoc environment. It is shown from the simulation that the proposed method can provide low control overhead and high transmission throughput.

• The KIPS Transactions:PartC
• /
• v.15C no.6
• /
• pp.539-546
• /
• 2008

In this paper, we propose an address autoconfiguration mechanism and a route establishment mechanism appropriate for the modified MANET architecture which overcomes the multi-link subnet problem. For the delivery of Router Advertisement (RA) messages without causing the duplicate packet reception problem in the multi-hop wireless network environment, the Scope-Extended RA (Scope-Extended Router Advertisement) message is defined. Also, by defining the MANET Prefix option, a MANET node is allowed to send packets destined to a host not in the MANET directly to the gateway. This can prevent the performance degradation caused by broadcasting control messages of the reactive routing protocol for route establishment. The performance of the proposed mechanism is analyzed through NS-2 based simulations and, according to the simulation results, it is shown that the proposed mechanism performs well in terms of the control message overhead.

• Journal of KIISE
• /
• v.43 no.11
• /
• pp.1233-1244
• /
• 2016

In the IoT network environments for LLNs(Low power and Lossy networks), IPv6 Routing Protocol for Low Power and Lossy networks(RPL) has been proposed by IETF(Internet Engineering Task Force). The goal of RPL is to create a directed acyclic graph, without loops. As recommended by the IETF standard, RPL route recovery mechanisms in the event of a failure of a node should avoid loop, loop detection, DIO Poisoning. In this process, route recovery time and control message might be increased in the sub-tree because of the repeated route search. In this paper, we suggested RPL route recovery method to solve the routing overhead problem in the sub-tree during a loss of a link in the RPL routing protocol based on IoT wireless networks. The proposed method improved local repair process by utilizing a route that could not be selected as the preferred existing parents. This reduced the traffic control packet, especially in the disconnected node's sub tree. It also resulted in a quick recovery. Our simulation results showed that the proposed RPL local repair reduced the recovery time and the traffic of control packets of RPL. According to our experiment results, the proposed method improved the recovery performance of RPL.

• Journal of Advanced Navigation Technology
• /
• v.13 no.2
• /
• pp.165-171
• /
• 2009

HLA is made for interoperability and reusability as distributed system framework under DMSO. RTI provides the necessary services for message transmission, object management as HLA 's understructure. But its performance can decrease as it becomes larger and more complex because of communication overhead. To solve this problem, RTI and TCP socket are partially used during data exchange and OMM is designed to efficiently manage objects. The efficiency of the proposed method is proved through simulation when it is applied to an air traffic control simulation based on HLA/RTI.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.6
• /
• pp.48-55
• /
• 2005

In this paper, a mathematical model and a simulation method for the response time analysis of Local Interconnect Network(LIN) based network systems are proposed. Network-induced delays in a network based control system can vary widely according to the transmission time of message and the overhead time of transmission. Therefore, in order to design a distributed control system using LIN network, a method to predict and verify the timing behavior of LIN protocol is required at the network design phase. Furthermore, a simulation environment based on a timing model of LIN protocol is beneficial to predict the timing behavior of LIN. The model equation is formulated with six timing parameters deduced from timing properties of LIN specification. Additionally, LIN conformance test equations to verify LIN device driver are derived with timing constraints of the parameters. The proposed model equation and simulation method are validated with a result that is measured at real LIN based network system.