• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.2
• /
• pp.87-93
• /
• 2010

Purpose: The purpose of this study was to compare the retention of the two denture adhesives with a silicone edentulous model and a resin denture base in vitro study. Material and methods: The experimental groups were used two denture adhesives and classified into 5 subgroups each. Subgroups were divided by the number of times the saliva sprayed. The control group was used synthetic saliva only. Dislodging tensile strengths were applied to the resin denture base using Instron in 3 directions ; vertical, lateral, and anterior-posterior. Results: The retention of two denture adhesives was increased significantly than saliva alone (P <.05). In each denture adhesives, the retention of saliva sprayed first was decreased than denture adhesive alone, but it didn't have significant differences. Whenever saliva sprayed repeated, the retention was decreased significantly than saliva sprayed first (P <.05). In each denture adhesives, vertical retentive force was highest than lateral and anterior-posterior retentive forces, and anterior-posterior retentive force was higher than lateral retentive force. This results were significantly different (P < .05). Significant differences of the retentive ability among two denture adhesives were not observed. Conclusion: From the results, use of the denture adhesives resulted in improved retentive ability of denture. Especially retentive force was highest in vertical direction.

• Journal of Navigation and Port Research
• /
• v.31 no.5 s.121
• /
• pp.345-351
• /
• 2007

In approaching sea area of Busan harbour, there are many traffic vessels and external forces such as strong seasonal wind and lateral flow are existed. Since the area caused the risk of navigation and ship operators feel hard to enter/depart on Busan port, we carried our the evaluation of traffic risk and propriety at Busan no.1 fairway. In order to assess the safety in the fairway, we analyzed ship's traffic stream based on the marine traffic survey and evaluated the traffic safety of present Traffic Separation Schemes(TSS) and suggest TSS in the research using full mission ship-handling simulators. As a result, the suggested TSS has an effect on improving the traffic safety. In addition, this paper was to suggest the dredging area of depth of water, the passage of towing vessels and control of warships for preventing of maritime accidents in the Busan no.1 fairway.

• The Korean Journal of Nuclear Medicine
• /
• v.15 no.1
• /
• pp.1-11
• /
• 1981

To evaluate the diagnostic accuracy of the measurement of free thyroxine (FT4) by radioimmunoassay, we measured free $T_4\;and\;T_4,\;T_3,\;T_3RU$, TSH and TBG serum levels by radioimmunoassay in 18 healthy persons and 52 patients with various thyroid diseases and 11 normal pregnant women. The results are as follows. 1. In 19 cases of overt hyperthyroidism, $T_3,\;free\;T_4$ and FTI, $T_4/TBG$ ratio reflect hyperfunction in all cases. $T_4$ is increased in 94% (18/19) and TBG and TSH are decreased in 79% (15/19). 2. In 8 patients with overt hypothyroidism, TSH is increased in all cases and free $T_4$ and FTI is decreased in all cases. $T_4$ is decreased in 87.5% (7/8), $T_3$ is decreased in 75% (6/8) and $T_4/TBG$ ratio is decreased in 62.5% (5/8). 3. In 5 patients who are clinically in euthyroid state after treatment of hyperthyroidism, $T_4,\;free\;T_4$, FTI and TSH are in the normal range in all cases and $T_3$ is normal in 60% (3/5) and slightly increased in 40% (2/5). 4. In 10 patients who showed clinically borderline hypothyroidism after treatment of hyperthyroidism, TSH is increased in all cases and free $T_4$ and FTI are decreased in all cases, but $T_4\;and\;T_3,\;T_4/TBG$ ratio are in the normal limit in all cases. So after treatment of hyperthyroidism, TSH, free $T_4$ or FTI are recommended as optimal thyroid function test. 5. In normal pregnancy, free $T_4$, FTI and $T_4/TBG$ ratio reflect normal function, but the other parameters revealed unreliable due to the influence of increased TBG. Also TBG and TSH level in pregnancy is increased significantly compared with normal healthy control group. 6. The coefficients of correlation between free $T_4$ and FTI were 0.862 (p<0.001) and 0.685 (p<0.001) between free $T_4\;and\;T_4/TBG$ ratio. In most patients, diagnostic value of free $T_4$ was comparable and even superior to FTI, so free $T_4$ measurement can be used routinely with thyrotropin assay in the diagnosis of hypothyrodism or with $T_3$ for the diagnosis of hyperthyroidism.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 1999.04a
• /
• pp.5-5
• /
• 1999

The Principal deficiency of the existing notion about the sintering-mixtures consists in the fact that almost no attention is focused on the Phenomenon of alloy formation during sintering, its connection with dimensional changes of powder bodies, and no correct ideas on the driving force for the sintering process in the stage of establishing chemical equilibrium in a system are available as well. Another disadvantage of the classical sintering theory is an erroneous conception on the dissolution mechanism of solid in liquid. The two-particle model widely used in the literature to describe the sintering phenomenon in solid state disregards the nature of the neighbouring surrounding particles, the presence of pores between them, and the rise of so called arch effect. In this presentation, new basic scientific principles of the driving forces for the sintering process of a two-component powder body, of a diffusion mechanism of the interaction between solid and liquid phases, of stresses and deformation arising in the diffusion zone have been developed. The major driving force for sintering the mixture from components capable of forming solid solutions and intermetallic compounds is attributed to the alloy formation rather than the reduction of the free surface area until the chemical equilibrium is achieved in a system. The lecture considers a multiparticle model of the mixed powder-body and the nature of its volume changes during solid-state and liquid-phase sintering. It explains the discovered S-and V-type concentration dependencies of the change in the compact volume during solid-state sintering. It is supposed in the literature that the dissolution of solid in liquid is realised due to the removal of atoms from the surface of the solid phase into the melt and then their diffusicn transfer from the solid-liquid interface into the bulk of liquid. It has been shown in our experimental studies that the mechanism of the interaction between two components, one of them being liquid, consist in diffusion of the solvent atoms from the liquid into the solid phase until the concentration of solid solutions or an intermetallic compound in the surface layer enables them to pass into the liquid by means of melting. The lecture discusses peculimities of liquid phase formation in systems with intermediate compounds and the role of the liquid phase in bringing about the exothermic effect. At the frist stage of liquid phase sintering the diffusion of atoms from the melt into the solid causes the powder body to grow. At the second stage the diminution of particles in size as a result of their dissolution in the liquid draws their centres closer to each other and makes the compact to shrink Analytical equations were derived to describe quantitatively the porosity and volume changes of compacts as a result of alloy formation during liquid phase sinteIing. Selection criteria for an additive, its concentration and the temperature regime of sintering to control the density the structure of sintered alloys are given.

• Geotechnical Engineering
• /
• v.10 no.2
• /
• pp.121-140
• /
• 1994

This paper presents the probabilistic model to evaluate the three-dimensional stability of layered deposits and c-0 soil slopes. Rotational slides are assumed with a cylindroid control part terminated with plane ends. And the potential failure surfaces in this study are assumed with the logarithmic spiral curve refracted at boundary of layers. This model takes into consideration the spatial variabilities of soil properties and the uncertainties stemming from insufficient number of samples and the discrepancies between laboratory measured and in -situ values of shear strength parameters. From the probabilistic approxi mate method (FOSM and SOSM method), the mean and variance of safety factor are calculated, respectively. And the programs based on above models is developed and a case study is analysed in detail to study the sensitivity of results to variations in different parameters by using the programs developed in this study. On the basis of thin study the following conclusions could be stated : (1) The sensitivity analysis shown that the probability of failure is more sensitive to the uncertainty of the angle of internal friction than that of the cohesion, (2) The total 3-D proability of failure and the critical width of failure are significantly affected by total width of slope. It is found that the total 3-D probability of failure and the critical width of failure increase with increasing the slope width when seismic forces do not exist and the total 3-D probability of failure increases with increasing the slope width and the critical width of failure decreases when seismic intensity is relatively large, (3) A decrease in the safety factor (due to effect such as a rise in the mean ground water level, lower shear strength parameters, lower values for the correction factors, etc.) would result in reduction in the critical width of failure.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.11B
• /
• pp.1715-1724
• /
• 2010

This paper analyzes the limitations and provides alternative options for Korean Military LISI model, which is based on interoperability assessment model, LISI(Level of Information System Interoperability), developed for US defense information systems and reformed to suit the Korean Military environment by ADD. Korean Military's LIST model is applied to all systems(information system, weapon systems, non-weapon systems)' interoperability assessment defined in acquisition regulations by Joint Interoperability Test Center, a subordinate unit of Defense Command and Control Forces and the only assessment agency of defense interoperability. LISI was basically developed as an assessment model for information system's interoperability, but due to it's shortfall in assessing complex systems including information systems, weapon and non-weapon systems required from New environment SOSI(System of Systems Interoperability) has recently been researched and developed. On the other hand, it is inevitable that Korean Military's LISI model face fundamental limitations as an interoperability assessment tool for Defense Information System as well as for weapon and non-weapon systems, since it was benchmarked and reformed from the US LISI model. In order to overcome such limitations, MND and associated agencies are providing improvement methods through studies. This paper will provide LISI capability model's assessment criteria on Application(P), Infrastructure(I), Data(D), restraints of on comparison assessment process of unit systems evaluated and politic alternatives to overcome the restraints.

• Journal of the Korea Society for Simulation
• /
• v.29 no.2
• /
• pp.105-117
• /
• 2020

Analysis of combat effectiveness is required to consider the concept of tactical cooperative engagement between manned-unmanned weapon systems, in order to predict the required operational capabilities of future weapon systems that meets the concept of 'effect-based synchronized operations.' However, analytical methods such as mathematical and statistical models make it difficult to analyze the effects of complex systems under nonlinear warfare. In this paper, we propose a combat simulation model that can simulate the concept of cooperative engagement between manned-unmanned combat entities based on wireless communications. First, we model unmanned combat entities, e.g., unmanned ground vehicles and drones, and manned combat entities, e.g., combatants and artillery, considering the capabilities required by the future ground system. We also simulate tactical behavior in which all entities perform their mission while sharing battlefield situation information through wireless communications. Finally we explore the feasibility of the proposed model by analyzing combat effectiveness such as target acquisition rate, remote control success rate, reconnaissance lead time, survival rate, and enemy's loss rate under a small-unit armor reconnaissance scenario. The proposed model is expected to be used in war-game combat experiments as well as analysis of the effects of manned-unmanned ground weapons.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.26 no.3
• /
• pp.51-61
• /
• 1989

Recently, the growth in the propulsion power and propeller size of typical energy saving ships has resulted in severe damages of the oil-lubricated stern tube bearing. Consequently, a more rational analytical method for the design of the shafting system is required. In this paper an analytical method applicable to the design of the oil-lubricated stern tube bearing and shafting system is presented. The method consists of the finite element analysis of the shafting system and the oil film hydrodynamics. The shafting system is modeled as a three-dimensional problem using beam elements taking account for the steady components of thrust, lateral forces and moments of the propeller as well as the elastic foundation effects. The oil film hydrodynamics is modeled as a two-dimensional problem. Equal and retangular elements employing hourglass control method are used for the construction of the oil film fluidity matrix. To search the quasi-static equilibrium position between the propeller shaft and the oil film, an optimization technique is employed. Some numerical results based on the proposed method are compared with some measured and numerical data available. They show acceptable agreements with the data.

• The KSFM Journal of Fluid Machinery
• /
• v.18 no.6
• /
• pp.63-70
• /
• 2015

This paper proposes a novel airfoil named "KA2" for the blade of the wind turbine systems. Dynamic loads characteristics are analyzed and compared using aerodynamic data of ten airfoils including the proposed airfoil. The blade is divided into the sixteen elements in the longitudinal direction of the blade for applying the Blade Element Method Theory (BEMT) method, and in each element, torque, thrust, and pitching moment are calculated using turbulent time varying wind speed and aerodynamic data of each wing. Additionally, each force and torque is accumulated in the whole region of the blade for the estimation of representative values. The magnitude of such forces is comparatively analyzed for different airfoils. The angle of attack is constant below the rated wind speed due to the fact that the tip speed ratio is kept at the constant value, and it increases in the region of over rated wind speed as the tip speed ratio decreasing with constant rated rpm and increasing wind speed. Such increase in the angle of attack causes the changes of the force acting on the airfoil with different characteristics of lift and drag in the stall region of each different airfoil. Even though the mean wind speed is in the rated speed in a given time, because of the turbulence, it has either the over rated or under rated speed most of the time. Furthermore, the dynamic properties of each force are analyzed in this rated wind speed in order to objectively understand the dynamic properties of the blades which are designed based on the different airfoils. These dynamic properties are also compared by the standard deviation of time varying characteristics. Moreover, the output characteristics of the wind turbine are investigated with different airfoils and wind speeds. Based on these investigations, it was revealed that the proposed airfoil (KA2) is well applicable to the blade with passive pitch control system.

• Korean journal of communication and information
• /
• v.22
• /
• pp.77-106
• /
• 2003

As globalization of communication is going on and as the media have become increasingly central to the world economy, media policy matters have become the province of world economic organizations like the IMF and the WTO. The WTO service negotiation is focused primarily on the discriminatory and quantitative barriers associated with the trade of audiovisual services. Domestic measures such as subsidization, content regulation including quotas, and licensing requirements and restrictions on foreign ownership and control are at issues here. These measures have been successfully implemented by countries wishing to withstand competition from the American audiovisual industry. The debate about trade in audiovisual services is permeated by the unstated assumption that these programs are pure commodities whose production, distribution, exhibition and in turn, values are solely determined by the market forces. It is therefore presumed that liberalization of trade in audiovisual services will benefit all, serving cultural pluralism and diversity as well as economic efficiency. However, this assumption is not shared by developing countries, the recipients of U.S. television material. They argue audiovisual sector requires a social and cultural approach, since it plays a key role in the preservation of people's identity and social bonds. They claim that it is the each state's right to define its media policy and to implement it through the means it considers fit. These clashing views over the nature of the audiovisual material and the ways in which protect cultural pluralism and diversity do not confine to be the realm of theoretical debate. Each state's interest and motivation to protect its local industry and to have a competitive advantage in the international market is working in this battle. Consolidation with the countries like Australia, Canada, and EU nations, in favour of cultural exemption, seems to be the best policy for us. However, we are not entirely free from the WTO pressures, considering relation to the U. S. This study analyzes Korean Broadcasting Law compared with those of other OECD countries and tries to propose some strategical guidelines facing WTO service negotiation in the area of broadcasting.