The effect of orthodontic force on the collagenase and phosphatase activities of the adjacent alveolar bone was evaluated. Maxillary canines of male cats were treated orthodontically with closed coil spring so as to exert about 80g force. Sixteen cats were equally divided into one control group and seven experimental groups (12 hrs, 24 hrs, 36 hrs, 2 days, 3 days, 5 days and 7 days after orthodontic treatment). After sacrificing all animals on experimental intervals, collagenase, acid phosphatase (ACP) and alkaline phosphatase (ALP) activities were determined in the pressure and tension sides of alveolar bones. ACP activities increased in both the pressure and tension sides, but significantly increased in the pressure side continuously. ALP activities increased in the tension side at early stage (1-2 days after treatment), but changed small amount in the pressure side. Collagenase activities increased in the pressure side, especially at late stage (5-7 days after treatment). These results suggest that (1) orthodontic fore force increases the ACP, ALP and collagenase activities generally and (2) activities of ACP and collagenase increase in the pressure side, but that of ALP in the tension side and (3) activities of ACP and ALP increase at early stage, but that of collagenase at late stage after orthodontic treatment. Therefore it is shown that there are time differences in the formation and destruction of organic and inorganic components in the bone metabolism of alveolus with application of the orthodontic forces.
The purpose of this study was to clarify the histologic changes in the expansion of midpalatal suture by the tensile forces. 39 Sprague-Dawley rats were divided into a control group (3 rats) and three experimental groups (36 rats) -group 1, pressured with a light force(50-75 g), group 2, with a heavy force(250-300 g) and group 3, with a heavy force (250-300 g) plus laser irradiation. Autoradiographic and histopathologic observations were performed in 12, 24, 48 and 96 hours after force delivery. The results were as follows; 1. The anterior portion of midpalatal suture was more separated than the posterior portion in all experimental groups. Group 2 showed more separation than group 1 and no difference to group 3 2. Ligament tearing appeared intensively in 24 hours, but the sutural matrices increased with times. ; Group 2 showed more tearing than group 1, and active regeneration of sutural matrices was observed in group 3. 3. Vascular dilatation appeared intensively in 24 hours and decreased with times. ; The anterior portion of midpalatal suture showed more dilatation than the posterior portion, ; The changes was the greatest in group 3, group 2, group 1, in that order. 4. New bone formation and the new capillary prolieferation began to appear in 12 hours and increased with times, : Group 2 showed more changes than group 1 and no difference to group 3. 5. Infiltration of inflammatory cells was little observed and was the greatest in group 2, group 1, group 3, in that order 6. Positive reaction of cells to $[^3H]$ thymidine was the greatest in 24 hours, and decreased with times ; The reaction was the greatest in group 3, group 2, group 1, in that order.
The purpose of this study was to examine the effect of the angle of a wedged insole on knee varus torque during walking. Fifteen healthy subjects were recruited. Knee varus torque was measured using three-dimensional motion analysis (Elite). Knee varus torque was normalized to gait cycle (0%: initial contact; 100%: ipsilateral initial contact) and stance phase (0%: initial contact; 100%: ipsilateral toe off). The average peaks of knee varus torque during the stance phase of the gait cycle according to the different insole angles (10 or 15 degrees) were compared using one-way ANOVA with repeated measures. The results showed that in the early stance phase, the average peak knee varus torque increased significantly for both the medial 10 and 15 degree wedged insole conditions and decreased significantly for both the lateral 10 and 15 degree wedged insole conditions as compared with no insole (p<.05). However, there were no significant differences between the 10 and 15 degree wedged insole conditions with either the medial or lateral wedged insole (p>.05). In the late stance phase, the average peak knee varus torque increased significantly for the medial 10 and 15 degree wedged insole conditions (p<.05), but not for the lateral 10 and 15 degree wedged insole conditions as compared with no insole (p>.05). We suggest that these results may be beneficial for manufacturing foot orthotic devices, such as wedged insoles, to control medial and lateral compartment forces in the knee varus-valgus deformity. Further studies of the effects of wedged insole angle on knee varus torque in patients with medial-lateral knee osteoarthritis are needed.
Journal of Korean Society of Coastal and Ocean Engineers
/
v.15
no.4
/
pp.232-241
/
2003
The interaction of incident monochromiatic waves with N bottom-mounted porous circular cylinders is investigated in the frame of three-dimensional linear potential theory. The fluid domain is divided into N+l regions i.e. a single exterior region and N interior regions, and the diffraction potential in each fluid region is expressed by an eigenfunction expansion method (Williams and Li,2000). The analytic results show that the porous structure reduces both the wave forces and the run-up wave around the cylinder. To verify the developed model, the systematic model test with a line array of porous cylinders is conducted at the wave tank (30m$\times$7m$\times$1.5m). The analytic results are in good agreement with the experimental results within measured frequency range. It is concluded that the breakwater constructed with an array of porous circular cylinders shows the performance of an effective wave barrier together with the seawater-exchange effect and is considered to have vast potentials for the use of seawater-exchanging breakwater in the future.
The purpose of this study was to delve into all sorts of literature concerned in a bid to suggest how the Public Law Enforcement and private Security sector could join forces in preventing crimes and guaranteeing the safety of people. Quite naturally, crime has increased greatly to become one of the major social problems. Crime has been conventionally recognized as 'something' to be prevented and controlled by public law enforcement. However, the rate of crime increase has been so rapid that public law enforcement alone could not effectively control the everincreasing and diversified crimes in our society. To serve as a qualified partner for the police, private security industry should strive to secure excellent manpower and provide education for workers to improve their qualifications. Specifically, they should put sustained efforts into diversifying the types of security business and creating a new market to extend their scope of business and become more competitive. Intensified collaboration between the Public Law Enforcement and private Security security sector is expected to create new synergy in addressing people's needs for safety and enhancing their quality of life.
Journal of the Korean Association of Oral and Maxillofacial Surgeons
/
v.30
no.5
/
pp.368-379
/
2004
Distraction osteogenesis is a biologic process of new bone formation between the surfaces of bone segments that are gradually separated by incremental traction. Distraction osteogenesis is clinically applied as a new treatment modality of mandibular hypoplasia or bony defect area in maxillofacial area by many studies of distraction devices and method. But disadvantage of distraction osteogenesis shows unfavorably long consolidation period and relapse tendency. Therefore. this experiment was designed to investigate the effectiveness of combined application of distraction and compression force for improving of bone quality and shortening of treatment period during distraction osteogenesis. Twenty-one Sprague-Dawley rats with $300{\sim}350gm$ were used. These were divided into two group as distraction group and combination group was applied with compression force in the consolidation period. The rat were sacrificed for gross finding, radiographic and histologic findings. at 2, 4 weeks after distraction. The result were follow : 1. On radiographic finding, all experimental groups appeared more radiopacity than control groups both at 2, 4 weeks after distraction. 2. On histologic finding, trabeculae of bone and mature lamellar bone were showed increasingly in experimental group. Ossification occured rapidly. From this study, we may suggest that compression force application in consolidation period during distraction osteogenesis can be useful method improve bone quality and to shorten the treatment period. But more experimental and clinical studis are necessitated on effects of compression force application during distraction osteogenesis.
Proceedings of the Korean Society of Precision Engineering Conference
/
2004.10a
/
pp.127-130
/
2004
For the quality control of the industrial products, an automatic hole measuring system has been developed. The measurement device allows X-Y movement due to contact forces between a hole and its own circular cone and the device is attached to an industrial robot. Its measurement accuracy is about 0.04mm. This movement of the plate is measured by two LVDT sensor system. But this system using the LVDT sensors is restricted by high cost and precision of measurement and correspondence of environment so particularly, a vision system with CCD-Camera is discussed in this paper for the above mentioned purpose. The device consists of two of two links jointed with hinge pins basically and, they guarantee free movement of the touch prove attached on the second link in the same plane. These links are returned to home position by the spring plungers automatically after each process for the next one. On the surface of the touch prove, it has a circular white mark for camera recognition. The system detect and notify the center coordinate of capture mark image through the image processing. Its measuring accuracy has been proved to be about $\pm$0.01mm through the repeated implementation over 200 times. This technique will shows the advantage of touch-indirect image capture idea using cone-shaped touch prove in various symmetrical shaped holes particulary, like tapped holes, chamfered holes, etc As a result, we attained our object in a view of the accuracy, economical efficiency, and functionality
Transactions of the Korean Society of Mechanical Engineers A
/
v.38
no.6
/
pp.691-698
/
2014
This paper describes the manufacturing processes for a flexbeam and torque tube made of composite materials, along with the procedures for testing their basic properties. A flexbeam and torque tube can be considered to be key structural components of a bearingless rotor hub system. A hinge offset effect can be realized by a large elastic deformation and twist of the flexbeam, and the blade pitch control forces are transferred by the rotation of the torque tube. The basic property tests included bending and twist tests to determine the flap stiffness, lag stiffness, and torsion stiffness of the flexbeam, torque tube, and blade, and these tests were performed prior to starting the whirl tower test. In addition, the estimated results were compared with experimental data, and the calculations were found to be a good match for the analysis results and had a similar tendency. Through these results, we could confirm that a flexbeam and torque tube made of composite materials satisfied the structural stiffness requirements.
The purpose of this study is to examine the level of stress and depressive symptom and to assess the utilization of professional consultation. Data extracted from Community Health Survey (CHS), conducted by Korea Centers for Disease Control and Prevention. The subjects were 174,975 (19-65 years). In result, 'Managers', 'Professionals and related workers', 'Clerks', 'Service workers', and 'Sales workers', 'Equipment, machine operating assembling workers', and 'Armed forces' were more in risk of stress. However, theses groups were less in probability of utilization for stress consultation. Based on these findings, mental health screening program for detecting risk group among occupation classification and employment status will be essential. It may be necessary to have sustainable strategies for utilizing mental health service to reduce the level of stress and depressive symptom of workers.
Background: Neuropathic pain resulting from diverse causes is a chronic condition for which effective treatment is lacking. The goal of this study was to test whether dexamethasone exerts a preemptive analgesic effect with bupivacaine when injected perineurally in the spared nerve injury model. Methods: Fifty rats were randomly divided into five groups. Group 1 (control) was ligated but received no drugs. Group 2 was perineurally infiltrated (tibial and common peroneal nerves) with 0.4% bupivacaine (0.2 ml) and dexamethasone (0.8 mg) 10 minutes before surgery. Group 3 was infiltrated with 0.4% bupivacaine (0.2 ml) and dexamethasone (0.8 mg) after surgery. Group 4 was infiltrated with normal saline (0.2 ml) and dexamethasone (0.8 mg) 10 minutes before surgery. Group 5 was infiltrated with only 0.4% bupivacaine (0.2 ml) before surgery. Rat paw withdrawal thresholds were measured using the von Frey hair test before surgery as a baseline measurement and on postoperative days 3, 6, 9, 12, 15, 18 and 21. Results: In the group injected preoperatively with dexamethasone and bupivacaine, mechanical allodynia did not develop and mechanical threshold forces were significantly different compared with other groups, especially between postoperative days 3 and 9 (P < 0.05). Conclusions: In conclusion, preoperative infiltration of both dexamethasone and bupivacaine showed a significantly better analgesic effect than did infiltration of bupivacaine or dexamethasone alone in the spared nerve injury model, especially early on after surgery.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.