• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.130.6-130
• /
• 2001

On-Board diagnostic systems are installed in passenger cars and light trucks on today. During the 1970's and early 1980's manufacturers started using electronic means to control engine functions and diagnose engine problems. This wa primarily to meet EPA emission standards. The CARB requires that, by model year 1996, all vehicle sold in California contain a certain minimum "On-Board Diagnostic" capability to diagnose emissions-related failures of the engine control system. These diagnostic requirements have been designated as OBD with a goal of monitoring all of the emissions-related components on-board the vehicle for proper operation. Part of the intent of CARB´s OBD program is that a single diagnostic tester can be used to read the diagnostic information from any OBD-compliant vehicle. A tester which ...

• 동력기계공학회지
• /
• 제14권1호
• /
• pp.65-70
• /
• 2010

Magnetic levitation system is nonlinear and inherently unstable, so it is difficult to control. Analog control circuit was widly used as the controller of magnetic levitation system, but digital controller is now substituted for analog controller according to development of digital electronics. In this study, Atmel AVR series, ATmega 128 which is a kind of $\mu$-processor for digital controller is used because the chip is cheap and popular. We designed and made ATmega 128 one-board controller and aimed to verify validity through the experiance of levitation response.

• 전기학회논문지
• /
• 제64권10호
• /
• pp.1493-1500
• /
• 2015

For efficient and economical train operation in low-density railway line, on-board oriented train control system, which reduces expensive wayside equipment, is being developed. In this paper, we discuss a tram signal priority strategy which enables efficient and safe train operation when the developing system is applied to train-tram railway environment. Based on the well-known transit signal priority strategies, we develop a tram signal priority algorithm and conduct simulations by using model-based systems engineering (MBSE) tool. Various considerations such as operation procedure, linkage to existing road traffic system, applicability with respect to crossroad types, and so on, are also dealt with.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.368-371
• /
• 2003

In this paper, we present a way that can implement the vector control Algorithm of induction motor and PWM signal generation on the condition Matlab/Simulink. The overall system model is designed by Simulink toolbox for vector control in induction motor. and then implement experiment with the DS1103 board of dSPACE. Although we are not coding the system, it is capable of doing simulation and experiment simultaneously. That is why Matlab and dSPACE board compiler can generate the "*.c" and "*.obj" files on the designed system automatically. After considering about hardware structure and driving system in DS1103 board. we verify the availability of proposed method through making a comparison/analysis between simulation and experiment.

• 자동차안전학회지
• /
• 제15권2호
• /
• pp.28-34
• /
• 2023

The Republic of Korea aims to complete the commercialisation of Level 4+ cooperative autonomous driving in 2027. It also plans to include V2X OBU in the K-NCAP evaluation items. Therefore, communication performance safety evaluation criteria for V2X OBU need to be established, and an OBU with necessary functions is needed to develop V2X communication performance safety evaluation technology for vehicles. In this study, we implemented a V2X OBU control board prototype that can be used to develop a V2X communication performance safety evaluation technology for Level 4+ autonomous vehicles, and confirmed that the control board prototype works normally.

• 한국가구학회지
• /
• 제17권2호
• /
• pp.49-56
• /
• 2006

This research was carried out to examine the FIR (far-infrared rays) emissivity and emission power of five types of flooring board by the mixing ratio of charcoal and loess, and the physical property of five types of injected flooring board by the amount of mixture. Type D was appeared the most high value of FIR emissivity and emission power. But there was a little difference among the five types of flooring board values. In physical properties, control type flooring board and injected flooring board showed a similar tendency. Among the domestic trees, all of hard wood seems to be used to surface wood for strong hardness flooring board. But a coniferous tree was not.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.68-69
• /
• 2006

A new type of simulation training system for power system operation is presented in this paper It is based on transmission mimic board, double screen PC, mimic control panel, and real-time digital simulator, KEPS. The operating simulation includes the simulations of the control panel interface and the simulator. The mimic board displays transmission network summary information using a software view of the hardware based mimic board. The symbols, numbers and colors layout exactly match those of the KEPS draft case to provide operators a familiar and effective starting point. This paper describes the development of an innovative training system, utilizing the benefits of 3 dimension visualization s/w and communication-control s/w to create the appropriate operational environment and allow simulation of various power system operations without the restrictions of other training methods. Experiences gained in developing concepts and meeting considerable s/w challenges are outlined, and the potential of the simulator for future operations training discussed.

• 전자공학회논문지
• /
• 제53권4호
• /
• pp.149-155
• /
• 2016

본 논문에서는 운전자의 체중 이동을 활용한 메카넘 휠 기반 전방향 전동 보드 제어 방법을 제안한다. 운전을 위한 별도의 운전 장치를 사용하지 않으며, 다수의 센서를 활용하여 측정한 체중 분포로부터 무게 중심의 위치를 구하여 전방향 전동 보드의 병진 운동과 회전 운동의 3 자유도 운전 명령을 생성한다. 체중 이동은 운전 명령으로 반영됨과 동시에 관성력을 극복하기 위한 운전자의 동작과 일치하여 직관적인 장점이 있다. 전체 제어 구조를 제시하며, 실험에 적용하여 제안된 방식의 타당성을 확인한다.

• 한국정밀공학회지
• /
• 제27권7호
• /
• pp.63-70
• /
• 2010

We developed a new punching system that generates pinholes expressing texts or images on a plastic plate. The pin-holed plate is used as a new glamorous display board reflecting colorful lights from the light emitting diode (LED) installed on the edge side of the plate. The four degree-of-freedom punching system was designed to make same multiple holes on four plastic plates simultaneously. For this motion, we designed a structure for a simultaneous motion of the system. For even reflection of the lights from texts or images on the board and fast production of the pin-holed boards, fast motion including precise position control is very important. We also built a PC-based integrated control system including a GUI program to help users easily design luminous texts or images on the plastic plate. Also, we conducted a performance test of the system to verify the punching speed and position control of the pin holes on the plate.

• The Korean Journal of Physiology
• /
• 제1권2호
• /
• pp.199-213
• /
• 1967

Circulatory and respiratory activities were observed in men exposed to the environment of engine room of a cruising Republic of Korea Navy ship and compared to the control values obtained in an ordinary laboratory room on land. The environment of an engine room of cruising navy ship was presumed to be a multiple stress acting on men. The environment of the engine room included high temperature $(35-42^{\circ}C)$, low relative humidity (20-38% saturation), vibration (about 7 cycles per second), rolling and pitching of ship and noises. Sixteen men were divided into two groups consisted of each 8 subjects. Subjects of sea duty group had experience of continuous on board duty averaging 3.5 years. Men of land duty group had no experience of on board activity. On land observations were made on one day prior to the boarding and leaving the port and four days after landing. In between observations in the engine room were made on the first, 5 th, 9 th, 12 th, and 14 th day of on board activity. The whole experimental period lasted for 20 days. Measurements on circulatory and respiratory parameters were at standing resting state (after 30 minutes standing in the case of on land study and 15 minutes in engine room study) and within one minute after cessation of on the spot running of which rhythm was 30/min. and lasted for 5 minutes. Oxygen consumption and pulmonary function test were done in the period of two minutes from the 3rd to 5th minutes of running. The following results were obtained. 1. Body temperature showed no change regardless of group difference or on land or on board measurements. 2. Pulse rate increased markedly after boarding the ship id both groups. Pulse rate increased from the first day on board at rest and after exercise as compared to the on land control value. This increase in pulse rate was more marked after exercise. Sea duty group showed less increase in pulse rate at rest than the land duty group. Standing and resting pulse rate of sea duty group on lam was 81 and increased to 87 at the 5th day on board and remained smaller than the land duty group throughout the period on board. Control standing and resting pulse rate of land duty group on land was 76 and reached 89 at the 9th day on board and thereafter decreased a little. Pulse rate of land duty group at rest on board remained greater than that of sea duty group throughout the period on board. 3. Systolic blood pressure of sea duty group increased after boarding the ship and remained higher than the control value on land. In the land duty group, however, systolic blood pressure decreased during the period on board the ship. Diastolic blood pressure decreased in both groups. 4. Resting breathing rate of land duty group increased and remained higher than the control value on land. In sea duty group, however, resting breathing rate showed a transient increase on the 1st day on board and decreased thereafter to the control value on land and kept the same level throughout the period of cruise. Absolute value of breathing rate in the sea duty group was greater than the land duty group both at rest and after exercise. 5. There was a lowering of breathing efficiency in both groups. Thus, increases in tidal volume and minute ventilation volume and decreases in maximum breathing capacity, vital capacity, capacity ratio and air velocity Index were observed after boarding the ship. An increase in ventilation equivalent was also observed in both groups. The lowering of breathing efficiency was more marked in the land duty group than the sea duty group. 6. Energy expediture increased in both groups during their stay on the ship and was more marked in the sea duty group. 7, Lactate concentration in venous blood at rest and after exercise increased after boarding the ship and no group difference was observed.