• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.8
• /
• pp.697-702
• /
• 2000

The paper considers the problem of improving the productivity of surface mounting in the printed circuit board(PCB) assembly line. This problem is generally divided into two problems ; real assignment problem and pick-and -place sequencing problem which are known to have no polynomial time algorithms. In the last ten years algorithm designers have been trying to solve them separately. However they need to be solved jointly because they are highly interrelated. This paper proposes an evolutionary algorithm which can consider the two problems jointly and thus yield a better solution. In order to evaluate the proposed algorithm computer simulation is performed on real-life surface mounting machines. The proposed algorithm is expected to reduce the assembly time of surface mounting machines and thus improve the productivity.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.2
• /
• pp.138-145
• /
• 2000

In this paper an initial alignment algorithm for a strapdown inertial navigation system is implemented using a RISC CPU board. The algorithm computes roll pitch and yaw angles of the direction cosine matrix utilizing measured components of the specific force and earth rate when the navigation system is stationary. The coarse alignment algorithm is performed first and then the fine alignment algorithm containing a 3rd-order gyrocompass loop follows. The experimental set consists of an IMU a CPU board and a monitoring system Experimental results show that the implemented algorithm can be utilized in navigation systems.

• Journal of KSNVE
• /
• v.6 no.6
• /
• pp.851-856
• /
• 1996

The active noise cancellation system showing the effective convergence and stability has been studied by simplifying the controller structures using the weighting factors of control error path to the multi-channel filtered-x LMS algorithm which needs a lot of calculations and the performance has been verified experimentally. Besides, to implement the system performance in a vehicle cabin, experimental work for selecting the suitable numbers and positions of the microphones and speakers was accomplished. Effectively combining a TMS 320C 31 main processor conducting real number calculations and having various functions with other components, the purpose-built system board for active noise cancellation has been designed and with this board, car active noise cancellation system showing maximum stable 10dB noise reduction has been obtained at the car idling conditions above 3000rpm range.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.9
• /
• pp.172-176
• /
• 2013

This paper presents a modified filtered-x least mean square (FxLMS) algorithm to improve the stability of active noise control (ANC) system in realistic environment. A real-time ANC system employing modified FxLMS is designed and implemented on digital signal processor (DSP) board. The ANC system is evaluated for cancelling various tonal frequency noises in the range from 100 to 500 Hz and the performance is measured in terms of sound pressure level (SPL) attenuation. Experiment results show that a quiet zone with maximum 20 dB SPL attenuation can be generated around the location of error microphone.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.426-429
• /
• 2002

The data link layer (DLL) of Foundation Fieldbus (FF) includes both token-passing and scheduling services. Periodic data are transmitted via the scheduling service, while time-critical and time-available data are transmitted via the token-passing service. This study developed a network interface board that implements the DLL of FF. Using the network interface board, this study experimentally evaluates the delay performance of the DLL of FF. This study measured the delay performance with respect to the change of the DLL parameters of FF, and investigated the relationship between the DLL parameters and network performance. The study also compared the experimental results with the results obtained from an analytical model.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.434-438
• /
• 2002

Profibus is a open industrial communication system for a wide range of applications in manufacturing and process automation. In this study presented in this article, implementation of Profibus master board is implemented. Using an experimental model, this study investigates the relationship between network parameter in the Profibus data link layer and the network performance. Base on the results, this study suggests some factors that should be considered when a Profibus-based automation system is designed and implemented.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.672-672
• /
• 2011

This study describes the comparison of noise suppression performances at different locations of two error microphones in active noise control (ANC) for outdoor applications. For this study, 12 different locations were predefined to decide best locations for error sensors in terms of suppressing noise. As shown in Fig. 1, the ANC system with one primary loudspeaker, two secondary loudspeakers and two error microphones is operated by a filtered-x LMS (FXLMS) algorithm which is implemented in a TI 6713 DSP board and Realsys 4713 AD/DA Extension board. The noise for the primary source is a typical road noise measured at a highway roadside. The lengths of adaptive filters of W1 and W2 are varied from 32 to 128 respectively. An intensive computer simulation was accomplished before outdoor ANC experiments. It is expected from the simulation results that the ANC performances are very much dependent upon the locations of the two error microphones.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1315-1317
• /
• 2000

In this paper, a solution of remote manager system for power plant was introduced. In conventional remote control system computer or adapter are need to communicate with manager computer. As the number of managed power installations increases, the remote management system is going to be complicated and expensive. To solve the problem, a Multi-functional Board for power plant is developed. The Multi-functional Board has a both function of remote management and communication in LAN. This system will be hope to decrease the cost of remote management.

• Proceedings of the KSR Conference
• /
• 2003.05a
• /
• pp.139-144
• /
• 2003

This study was aimed to establish failure management plan of the rubber-tired AGT light rail vehicle for its safety case, which was developed according to the Korean standardized specifications for the light rail vehicle. Vehicular 9 failure modes anticipated during the system operation were considered, which are single malfunction of redundant equipment, malfunction of train radio, public address and air compressor, battery, main circuit NFB trip, on-board ATO control device malfunction, on-board ATP control device malfunction, fail of brake release, flat tire, train emergency door open.

• Journal of Power Electronics
• /
• v.14 no.4
• /
• pp.687-694
• /
• 2014

This paper focuses on the analysis and compensation of thrust ripples in permanent magnet linear synchronous motors (PMLSM). The main drawback in PMLSMs is the presence of thrust ripples, which are mainly due to the interaction between the permanent magnets and armature slotted core. These thrust ripples reduce the performance of the drive system in high precision applications especially at low speeds. This paper analyzes thrust ripples using the discrete wavelet transform. These undesired thrust ripples are compensated by using an adaptive feed forward controller. It is observed that this novel controller reduces about 65 percent of the thrust ripples. An extensive simulation is performed through MATLAB and it is validated through experimental results using a d-SPACE system with a DS1104 control board.