• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.06a
• /
• pp.16-23
• /
• 2000

The increasing functional needs of top-quality printing papers and packaging paperboards, and especially the rapid developments in electronic printing processes and various computer printers during past few years, set new targets and requirements for modern paper quality. Most of these paper grades of today have relatively high filler content, are moderately or heavily calendered , and have many coating layers for the best appearance and performance. In practice, this means that many of the traditional quality assurance methods, mostly designed to measure papers made of pure. native pulp only, can not reliably (or at all) be used to analyze or rank the quality of modern papers. Hence, introduction of new measurement techniques is necessary to assure and further develop the paper quality today and in the future. Paper formation , i.e. small scale (millimeter scale) variation of basis weight, is the most important quality parameter of paper-making due to its influence on practically all the other quality properties of paper. The ideal paper would be completely uniform so that the basis weight of each small point (area) measured would be the same. In practice, of course, this is not possible because there always exists relatively large local variations in paper. However, these small scale basis weight variations are the major reason for many other quality problems, including calender blacking uneven coating result, uneven printing result, etc. The traditionally used visual inspection or optical measurement of the paper does not give us a reliable understanding of the material variations in the paper because in modern paper making process the optical behavior of paper is strongly affected by using e.g. fillers, dye or coating colors. Futhermore, the opacity (optical density) of the paper is changed at different process stages like wet pressing and calendering. The greatest advantage of using beta transmission method to measure paper formation is that it can be very reliably calibrated to measure true basis weight variation of all kinds of paper and board, independently on sample basis weight or paper grade. This gives us the possibility to measure, compare and judge papers made of different raw materials, different color, or even to measure heavily calendered, coated or printed papers. Scientific research of paper physics has shown that the orientation of the top layer (paper surface) fibers of the sheet paly the key role in paper curling and cockling , causing the typical practical problems (paper jam) with modern fax and copy machines, electronic printing , etc. On the other hand, the fiber orientation at the surface and middle layer of the sheet controls the bending stiffness of paperboard . Therefore, a reliable measurement of paper surface fiber orientation gives us a magnificent tool to investigate and predict paper curling and coclking tendency, and provides the necessary information to finetune, the manufacturing process for optimum quality. many papers, especially heavily calendered and coated grades, do resist liquid and gas penetration very much, bing beyond the measurement range of the traditional instruments or resulting invonveniently long measuring time per sample . The increased surface hardness and use of filler minerals and mechanical pulp make a reliable, nonleaking sample contact to the measurement head a challenge of its own. Paper surface coating causes, as expected, a layer which has completely different permeability characteristics compared to the other layer of the sheet. The latest developments in sensor technologies have made it possible to reliably measure gas flow in well controlled conditions, allowing us to investigate the gas penetration of open structures, such as cigarette paper, tissue or sack paper, and in the low permeability range analyze even fully greaseproof papers, silicon papers, heavily coated papers and boards or even detect defects in barrier coatings ! Even nitrogen or helium may be used as the gas, giving us completely new possibilities to rank the products or to find correlation to critical process or converting parameters. All the modern paper machines include many on-line measuring instruments which are used to give the necessary information for automatic process control systems. hence, the reliability of this information obtained from different sensors is vital for good optimizing and process stability. If any of these on-line sensors do not operate perfectly ass planned (having even small measurement error or malfunction ), the process control will set the machine to operate away from the optimum , resulting loss of profit or eventual problems in quality or runnability. To assure optimum operation of the paper machines, a novel quality assurance policy for the on-line measurements has been developed, including control procedures utilizing traceable, accredited standards for the best reliability and performance.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.6
• /
• pp.467-478
• /
• 2020

Hypervisor virtualize hardware resources to utilize them more effectively. At the same time, hypervisor's characteristics of time and space partitioning improves reliability of flight software by reducing a complexity of the flight software. Korea Aerospace Research Institute chooses one of hypervisors for space, XtratuM, and examine its applicability to the flight software. XtratuM has strong points in performance improvement with high reliability. However, it does not support SMP. Therefore, it has limitation in using it with high performance applications including satellite altitude orbit control systems. This paper proposes RTEMS XM-SMP to support SMP with RTEMS, one of real time operating systems for space. Several components are added as hypercalls, and initialization processes are modified to use several processors with inter processors communication routines. In addition, all components related to processors are updated including context switch and interrupts. The effectiveness of the developed RTEMS XM-SMP is demonstrated with a GR740 board by executing SMP benchmark functions. Performance improvements are reviewed to check the effectiveness of SMP operations.

• Journal of Korean Academy of Nursing
• /
• v.30 no.5
• /
• pp.1156-1169
• /
• 2000

The study was aimed at developing an independent hospice center model that would be best suited for Korea based on a literature review and the current status of local and international hospices. For the study, five local and six international hospice organizations were surveyed. Components of the hospice center model include philosophy, purpose, resources (workers, facilities, and equipment), allocation of resources, management, financial support and hospice team service. The following is a summary of the developed model: Philosophies for the hospice center were set as follows: based on the dignity of human life and humanism, help patients spend the rest of their days in a meaningful way and accept life positively. On the staff side, to pursue a team-oriented holistic approach to improve comfort and quality of life for terminally ill persons and their families. The hospice center should have 20 beds with single, two, and four bed rooms. The center should employ, either on a part-time or full-time basis, a center director, nurses, doctors, chaplains, social workers, pharmacists, dieticians, therapists, and volunteers. In addition, it will need an administrative staff, facility managers and nurses aides. The hospice should also be equipped with facilities for patients, their families, and team members, furnished with equipment and goods at the same level of a hospital. represented by a center director who reports to a board and an advisory committee. Also, the center director administers a steering committee and five departments, namely, Administration, Nursing Service, Social Welfare, Religious Services, and Medical Service. Furthermore, the center should be able to utilize a direct and support delivery systems. The direct delivery system allows the hospice center to receive requests from, or transfer patients to, hospitals, clinics, other hospice organizations (by type), public health centers, religious organizations, social welfare organizations, patients, and their guardians. On the other hand, the support delivery system provides a link to outside facilities of various medical suppliers. In terms of management, details were made with regards to personnel management, records, infection control, safety, supplies and quality management. For financial support, some form of medical insurance coverage for hospice services, ways to promote a donation system and fund raising were examined. Hospice team service to be provided by the hospice center was categorized into assessment, physical care, emotional care, spiritual care, bereavement service, medication, education and demonstrations, medical supplies rental, request service, volunteer service, and respite service. Based on the results, the study has drawn up the following suggestions: 1. The proposed model for a hospice center as presented in the study needs to be tested with a pilot project. 2. Studies on criteria for legal approval and license for a hospice center need to be conducted to develop policies. 3. Studies on developing a hospice charge system and hospice standards that meet local conditions in Korea need to be conducted.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.7 s.337
• /
• pp.35-40
• /
• 2005

This paper proposes a fractional-N phase-locked loop (PLL) frequency synthesizer using the 3rd order ${\Delta}{\sum}$ modulator for 900MHz medium speed wireless link. The LC voltage-controlled oscillator (VCO) is used for the good phase noise property. To reduce the lock-in time, a charge pump has been developed to control the pumping current according to the frequency steps and the reference frequency is increased up to 3MHz. A 36/37 fractional-N divider is used to increase the reference frequency of the phase frequency detector (PFD) and to reduce the minimum frequency step simultaneously. A 3rd order ${\Delta}{\sum}$ modulator has been developed to reduce the fractional spur VCO, Divider by 8 Prescaler, PFD and Charge pump have been developed with 0.25um CMOS, and the fractional-N divider and the third order ${\Delta}{\sum}$ modulator have been designed with the VHDL code, and they are implemented through the FPGA board of the Xilinx Spartan2E. The measured results show that the output power of the PLL is about -lldBm and the phase noise is -77.75dBc/Hz at 100kHz offset frequency. The minimum frequency step and the maximum lock-in time are 10kHz and around 800us for the maximum frequency change of 10MHz, respectively.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.5
• /
• pp.94-104
• /
• 2000

The accuracy and reliability of the target tracking is very critical issue in the design of automotive collision warning radar A significant problem in multi-target tracking (MTT) is the target-to-measurement data association If an incorrect measurement is associated with a target, the target could diverge the track and be prematurely terminated or cause other targets to also diverge the track. Most methods for target-to-measurement data association tend to coalesce neighboring targets Therefore, many algorithms have been developed to solve this data association problem. In this paper, a new multi-target data association method based on order statistics is described The new approaches. called the order statistics probabilistic data association (OSPDA) and the order statistics joint probabilistic data association (OSJPDA), are formulated using the association probabilities of the probabilistic data association (PDA) and the joint probabilistic data association (JPDA) filters, respectively Using the decision logic. an optimal or near optimal target-to-measurement data association is made A computer simulation of the proposed method in a heavy cluttered condition is given, including a comparison With the nearest-neighbor CNN). the PDA, and the JPDA filters, Simulation results show that the performances of the OSPDA filter and the OSJPDA filter are superior to those of the PDA filter and the JPDA filter in terms of tracking accuracy about 18% and 19%, respectively In addition, the proposed method is implemented using a developed digital signal processing (DSP) board which can be interfaced with the engine control unit (ECU) of car engine and with the d?xer through the controller area network (CAN)

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.9
• /
• pp.113-122
• /
• 2017

This study was conducted to understand the factors influencing happiness of college students while focusing on meaning in life and to supply an interventional way for promotion of happiness of college students. The subjects were 205 students in C city and the data were collected from 20-30 October 2016. Data were analyzed based on themeans using an independent t-test, ANOVA, $Scheff{\acute{e}}^{\prime}s$ method, Pearson's correlation coefficients and stepwise multiple regression. Significant differences were found in the happiness grades by sex (p=0.045), age (p=0.019), degree (p=0.038), satisfaction in major (p<0.001), and perceived health condition (p<0.001). Happiness was positively related to self-confidence (p<0.001), self-control (p<0.001), positive emotion (p<0.001), meaning in life (p<0.001), finding meaning in life (p<0.001), and search for meaning in life (p<0.001). Uponmultiple regression analysis, finding meaning in life, perceived health condition, and satisfaction withmajor accounted for 41.0% of the happiness, with finding meaning in life beingthe most influential factor.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.4
• /
• pp.107-117
• /
• 2015

As the demand for urban business hotel has increased in the recent years due to the sharp rise in overseas tourists, the potential of business hotel development has gained in financial attention for the real estate investment. However, its concept and business domain has not been defined, and none of investment guidance for the development has not been clarified. Accordingly, this report intends to define the concept of urban business hotel in perspective of real estate investment through prior case studies and literature review, and provide the structure of determinants which control its investment decisions. Furthermore, this study develops the weight of determinants depending on the type of investment, and evaluate the two actual projects in urban area of Seoul, differed from investment type: direct and indirect, based on AHP and Fuzzy methodologies. Research finding indicate that the financial factors affecting the sales and tour business condition factors are critical determinants regardless of investment type. And it is notable that the direct investment perspective pays more attention on the finance and investment associated determinants while the indirect one more focuses on the regional and environmental ones. From the analysis of case evaluation, it is also noteworthy that the direct investors turn out to be more conservative than indirect investors due to the risk of equity capital investment.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.3
• /
• pp.166-174
• /
• 2000

Anchovy, EngrauEis japonica scoop nets are used in the coastal of Southern and Cheju of Korea. Especially in the Cheju, the fishing gear of scoop nets consists of upper boom, lower boom, pressing stick and bag net. They are operated by fishing boats of 6 to 10 ton class and 8 persons on board. The booms are controlled by side drum, and the net and pressing stick are hauled by only human power in operating. Therefore this fishery needs to large labor and heavy human power and has much risk. Three kinds of hydraulic winding device which controls two booms was designed and manufactured to reduce heavy labor force of scoop nets, and trial in the sea was carried out to test their performances using the commercial fishing boats of 6 ton class. The proper capacity of hydraulic pump and motor were determined by model test of boom 1/5 scale. The results obtained are as follows, 1. Tension of boom which is being drawn was the strongest and 187.5kgf when the boom's end is in the depth of 4m under the water. 2. The hydraulic motor of the fittest kind of winder has the least leakage per time than the other kinds. 3. In the best type of several winder devices, when the pressure difference was fixed $130kg/^2$ for the safe fishery, the winding velocity of boom line was 2m/sec, is faster 0.48/sec than traditional fishing method and this winder can catch the anchovy of 1.6 tonnage. 4. As a result, the crew were decreased from 8 to 6 and the problem of heavy human power and risk on fishing operation were solved by using the this winder.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.5
• /
• pp.10-24
• /
• 2007

In the dissertation, a power conversion system for fuel cell is composed of a PWM inverter with LC filter in order to convert fuel cell voltage to a single phase 220[V]. In addition, new insulated DC-DC converters are proposed in order that fuel cell voltage is boosted to 380[V]. In this paper, it requires smaller components than existing converters, which makes easy control. The proposed DC-DC converter controls output power by the adjustment of phase-shift width using switch $S_5\;and\;S_6$ in the secondary switch which provides 93-97[%] efficiency in the wide range of output voltage. Fuel cell simulator is implemented to show similar output characteristics to actual fuel cell. Appropriate dead time td enables soft switching to the range where the peak value of excitation current in a high frequency transformer is in accordance with current in the primary circuit. Moreover, appropriate setting to serial inductance La reduces communication loss arisen at light-load generator and serge voltage arisen at a secondary switch and serial diode. Finally, TMS320C31 board and EPLD using PWM switching technique to act a single phase full-bridge inverter which is planed to make alternating current suitable for household

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.4
• /
• pp.409-417
• /
• 2013

Mu-communication board supported by multi-communication is designed with Atxmega 128A1 which is a low power energy consuming of 8-bit microcontroller. ATxmega128A1 microcontroller consists of 8 UART(Universal asynchronous receiver/transmitter) ports which can be setting appropriate user interface having command line interpreter(CLI) program with each port, 2 kbytes EEPROM, 128 kbytes flash memory, 8 kbytes SRAM. 8 URAT ports are used for the multi communication modem, GPS module, etc. and EEPROM is used for saving a configuration for program running, and flash memory of 128 kbytes is used for storing a Firm Ware, and 8 kbytes SRAM is used for stack, storing memory of global variables while program running. If we uses the hybrid communication of path optimization of VHF, TRS and CDMA to remote control AtoN(aid to navigation), it is able to remove the communication shadow area. Even though there is a shadow area for individual communication method, we can select an optimum communication method. The compatibility of data has been enhanced as using of same data frame per communication devices. For the test, 8640 of data has been collected from the each buoy during 30 days in every 5 minutes and the receiving rate of the data has shown more than 99.4 %.