• Journal of Radiation Protection and Research
• /
• v.7 no.1
• /
• pp.34-48
• /
• 1982

The prime purpose of this study is to realize an index quantity, absorbed dose index, defined by the ICRU for the characterization of ambient radiation level at any location for the purpose of radiation protection. The experiment has been designed to be carried out in two phases, namely, preliminary and main experiment. In the primary study a 30cm diameter sphere of polyethylene was used, while in the main experiment that of tissue equivalent material was fabricated and used. Both experiments were performed in the gamma-ray fields of $^{137}Cs\;and\;^{60}Co$, and in a neutron beam of thermal column of the TRIGA MARK-II research reactor. In the measurement of gamma-ray absorbed dose TLD-700 $(^{7}LiF)$ chips were used, and for the neutron dose both Au activation foils and TLD chips (TLD-600 $(^{6}LiF)$ and TLD-700 for the discrimination of gamma-ray contribution) were used. Theoretical assessment of the absorbed dose in the sphere phantom has been carried out in accordance with the Ehrlich's idea that deduced on the basis of Burlin's cavity theory in the case of gamma-ray irradiation. For the analysis of neutron dose fluence-KERMA rate conversion method was used. The explanation on the dose assessment is given in detail. Results obtained were numerically and statistically analyzed and the depth dose distributions are presented in the graphic forms with normalized values. In the concluding remarks, the possibility and difficulty of realizing the index quantity, including questions and problems to be solved are mentioned.

• Korea Real Estate Review
• /
• v.27 no.3
• /
• pp.87-102
• /
• 2017

The purpose of this study was to compare the taxation equity of non-residential collective real estate based on its standard market prices set by National Tax Service and those for taxation set by the Ministry of Government Administration and Home Affairs with that of the apartment houses in Seoul, South Korea. The study findings were as follows. First, the analysis results of the standard market price rates of non-residential collective real estate pointed to a huge gap in the assessment rate (AR) of the taxation standards among the Gu offices. Second, there was a big coefficient of dispersion (COD) in the standard market prices of non-residential collective real estate, which confirmed the presence of horizontal inequity. Finally, there was regressive vertical inequity, which leads to the undervaluation of high-value assets, in the standard market prices of non-residential collective real estate. The evaluation of the standard market prices of non-residential collective real state should thus reflect the market prices and the addition and assessment of the land and buildings to achieve taxation equity. Based on these findings, it is hoped that this study will make a significant contribution to the improvement of the official announcement system for non-residential real estate based on real transactions during the shift to such system.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.12
• /
• pp.1836-1843
• /
• 2019

Objective: Social genetic effects (SGE) are an important genetic component for growth, group productivity, and welfare in pigs. The present study was conducted to evaluate i) the feasibility of the single-step genomic best linear unbiased prediction (ssGBLUP) approach with the inclusion of SGE in the model in pigs, and ii) the changes in the contribution of heritable SGE to the phenotypic variance with different scaling ${\omega}$ constants for genomic relationships. Methods: The dataset included performance tested growth rate records (average daily gain) from 13,166 and 21,762 pigs Landrace (LR) and Yorkshire (YS), respectively. A total of 1,041 (LR) and 964 (YS) pigs were genotyped using the Illumina PorcineSNP60 v2 BeadChip panel. With the BLUPF90 software package, genetic parameters were estimated using a modified animal model for competitive traits. Giving a fixed weight to pedigree relationships (${\tau}:1$), several weights (${\omega}_{xx}$, 0.1 to 1.0; with a 0.1 interval) were scaled with the genomic relationship for best model fit with Akaike information criterion (AIC). Results: The genetic variances and total heritability estimates ($T^2$) were mostly higher with ssGBLUP than in the pedigree-based analysis. The model AIC value increased with any level of ${\omega}$ other than 0.6 and 0.5 in LR and YS, respectively, indicating the worse fit of those models. The theoretical accuracies of direct and social breeding value were increased by decreasing ${\omega}$ in both breeds, indicating the better accuracy of ${\omega}_{0.1}$ models. Therefore, the optimal values of ${\omega}$ to minimize AIC and to increase theoretical accuracy were 0.6 in LR and 0.5 in YS. Conclusion: In conclusion, single-step ssGBLUP model fitting SGE showed significant improvement in accuracy compared with the pedigree-based analysis method; therefore, it could be implemented in a pig population for genomic selection based on SGE, especially in South Korean populations, with appropriate further adjustment of tuning parameters for relationship matrices.

• Nuclear Engineering and Technology
• /
• v.45 no.4
• /
• pp.513-522
• /
• 2013

The ODSCC detected in the TSP position of Ulchin 3&4 SGs are typical ODSCC of Alloy 600MA tubes. The causative chemical environment is formed by concentration of impurities inside the occluded region formed by the tube surface, egg crate strips, and sludge deposit there. Most cracks are detected at or near the line contacts between the tube surface and the egg crate strips. The region of dense crack population, as defined as between $4^{th}$ and $9^{th}$ TSPs, and near the center of hot leg hemisphere plane, coincided well with the region of preferential sludge deposition as defined by thermal hydraulics calculation using SGAP computer code. The cracks developed homogeneously in a wide range of SGs, so that the number of cracks detected each outage increased very rapidly since the first detection in the $8^{th}$ refueling outage. The root cause assessment focused on investigation of the difference in microstructure and manufacturing residual stress in order to reveal the cause of different susceptibilities to ODSCC among identical six units. The manufacturing residual stress as measured by XRD on OD surface and by split tube method indicated that the high residual stress of Alloy 600MA tube played a critical role in developing ODSCC. The level of residual stress showed substantial variations among the six units depending on details of straightening and OD grinding processes. Youngwang 3&4 tubes are less susceptible to ODSCC than U3 and U4 tubes because semi-continuous coarse chromium carbides are formed along the grain boundary of Y3&4 tubes, while there are finer less continuous chromium carbides in U3 and U4. The different carbide morphology is caused by the difference in cooling rate after mill anneal. There is a possibility that high chromium content in the Y3&4 tubes, still within the allowable range of Alloy 600, has made some contribution to the improved resistance to ODSCC. It is anticipated that ODSCC in Y5&6 SGs will be retarded more considerably than U3 SGs since the manufacturing residual stress in Y5&6 tubes is substantially lower than in U3 tubes, while the microstructure is similar with each other.

• Journal of the Korea Convergence Society
• /
• v.9 no.11
• /
• pp.117-126
• /
• 2018

The purpose of this study was to examine the relationship between the working posture and symptoms of musculoskeletal disorders of dental hygienists during scaling. The subjects in this study were 264 selected dental hygienists. A convergence study was implemented using questionnaire that was prepared to cover general characteristics, health care, the work of scaling, working posture and subjective musculoskeletal symptoms. As for data analysis, R 2.15.1 was employed. As a result of analyzing the collected data, the rate of good working posture during scaling stood at 29.9 percent; roughly good posture, at 37.5 percent; incorrect posture, at 32.6 percent. Regarding the area of the body in which they complained of musculoskeletal symptoms, the shoulders were 3.32-fold more mentioned than any other area(OR,3.32;95%CI, 1.58~6.98); the foot, 2.97-fold more(OR,2.97;95%CI, 1.18~7.48); the hands, 2.84-fold more(OR,2.84:95%CI, 1.35~5.98); the neck, 2.82-fold more(OR, 2.82;95%CI, 1.35~5.91); the back, 2.41-fold more(OR,2.41;95%CI, 1.02~5.68). The findings of the study that demonstrate the importance of good working posture are expected to make a contribution to the improvement of work environments, the development of efficient preventive programs and the preparation of sustained educational plans, and it's necessary in the future to make a research study by including psychosocial factors.

• Journal of Wetlands Research
• /
• v.21 no.3
• /
• pp.191-198
• /
• 2019

High impervious surfaces increase the surface runoff during rainfall and reduces the underground infiltration thereby leading to water cycle distortion. The distortion of water cycle causes various urban environmental problems such as urban flooding, drought, water pollutant due to non-point pollution runoff, and water ecosystem damage. Climate change intensified seasonal biases in urban rainfall and affected urban microclimate, thereby increasing the intensity and frequency of urban floods and droughts. Low impact development(LID) technology has been applied to various purposes as a technique to reduce urban environmental problems caused by water by restoring the natural water cycle in the city. This study evaluated the contribution of hydrologic characteristics and water cycle recovery after LID application using long-term monitoring results of various LID technology applied in urban areas. Based on the results, the high retention and infiltration rate of the LID facility was found to contribute significantly to peak flow reduction and runoff delay during rainfall. The average runoff reduction effect was more than 60% at the LID facility. The surface area of the LID facility area ratio(SA/CA) was evaluated as an important factor affecting peak flow reduction and runoff delay effect.

• The Journal of the Korea Contents Association
• /
• v.19 no.2
• /
• pp.340-348
• /
• 2019

This study analyzes the factors that influence commercial gentrification in Seoul by using both logit model analysis and machine learning with data cumulated from 2015 to 2018 regarding 158 market areas. Logit analysis indicates that log(market area average monthly rent) and the ratio of the purchasing amount by customers aged 40 and younger to total sales in the restaurant and retail business category are statistically significant at 1%; the increase in sales per female customer aged between 30 and 39 in the restaurant and retail business category is statistically significant at 5%; and the increase in number of retailers with a business history of less than two years in the franchise business category is significant at 10%. Machine learning indicates that significant factors ordered by importance are the total retail area, the existence of an industrial complex within the market area, the existence of a traditional market within the market area, the location of subway stations within the market area, the increase of entertainment facilities such as movie theaters within the market area, average monthly rent, and the growth rate of average monthly rent. The contribution of this research is threefold. First, this study analyzes the entire commercial area of Seoul, Korea. Second, this study provides a foundation for future research on predictive indicators by empirically investigating the factors that influence commercial gentrification in Seoul. Lastly, this study introduces various methods of research by utilizing a machine learning approach.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.1
• /
• pp.102-110
• /
• 2019

The shipbuilding and offshore plant industry of Korea is important and leads Korea's economic growth, designated as the 1st to 4th export items in Korea in terms of export contribution over the period from 2011 to 2015. This study proposes ways to improve the national competitiveness of Korean shipyards in the global offshore drilling market by reviewing a business model for providing an integrated offshore drilling commissioning service in Korea. This commissioning service model, which was attempted in 2014, was reviewed, and a new proposed business model for overcoming the limitations of the previous model and activating further business was evaluated. As a result of an economic evaluation, it was found that a 150-meter water depth model is economically more effective. As the number of integrated commissions increased from 2 to 5 times per year, NPV, IRR and B/C ratios increased and the fee per use decreased. Therefore, for offshore drilling facilities constructed and delivered in Korea, it will be necessary to encourage integrated offshore commissioning.

• Journal of Environmental Impact Assessment
• /
• v.30 no.4
• /
• pp.237-246
• /
• 2021

The similarity of hourly PM₁₀ and PM_2.5 concentration profiles of the atmospheric monitoring stations in Gyeonggi-do was evaluated through the multilateral analysis between stations. The existing category for most stations in the regions shows relatively low Pearson correlation values of 0.68 and 0.7 for PM₁₀ and PM_2.5 on average respectively, and some monitoring stations revealed high relationships over 0.8 to other regions. Since the current regions are mainly categorized by cluster analysis based on the number of occurrence of high concentration events and geological factors, it is necessary to reclassify them by concentration characteristics for precise fine dust management. In accordance, multi-dimensional scaling being able to visualize could categorize the regions based on regional emission contribution rate and hourly fine dust concentration. As a result of the current analysis, PM₁₀ and PM_2.5 could be reclassified into five regions and fourregions, respectively.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.4
• /
• pp.475-481
• /
• 2022

Recycled aggregates show high water absorption rate compared to natural aggregates due to microcrack developed during production process and adhered cement pastes at the surface of recycled aggregates. This leads to the deterioration of mechanical properties and slow work flow. Currently it is getting hard to satisfy high demand for natural aggregates. Utilizing recycled aggregate more widely may be a substitutable countermeasure for the shortage of natural resources. In this study, two-stage mixing approach(TSMA) suggested by Tam et al. is used to produce recycled aggregate concrete(RAC) with 100 % replacement of coarse natural aggregate and tests for compressive strength, elastic modulus, and chloride ion diffusion coefficient are conducted to find out the effect of TSMA compared to normal mixing method. According to experimental result compressive strength and elastic modulus of RAC with TSMA was superior to those of RAC with normal mixing irrespective of water-cement ratio, and in some cases mechanical properties of RAC with TSMA approached to those of natural aggregate concrete(NAC). However, chloride ion diffusion coefficient of RAC was higher than that of NAC. This illustrates that TSMA is not an appropriate method in reducing chloride ion diffusion coefficient, resulting in inconsequential contribution of TSMA to the durability of RAC.