• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.4
• /
• pp.540-572
• /
• 2011

The present review focuses on the effects of energy intake on performance, changes in body tissue during lactation, and metabolic parameters in dairy cows. Especially, pre-partum nutrition and its influence on lactation are emphasized. In recent decades the increase in genetic potential of dairy cows has increased milk yield. This fact sharpens the problem of a negative energy balance in early lactation because the amount of energy required for maintenance and milk production exceeds the amount of energy cows can consume. Around parturition, reduced feed intake reinforces the situation. Continuing negative energy balance causes decreasing milk yield, fertility problems, and incidence of metabolic diseases. Hence, the cow has to rely on body reserves that were stored in late lactation and the dry period. It is evident that the nutritional status pre-partum acts as the key factor for milk yield and fertility parameters in the following lactation. Cows overfed during the foregoing gestation and which have gained large quantities of body fat have lower dry matter intake along with the need to mobilize larger quantities of body reserves in lactation. The milk yield in the following lactation is lower than in cows fed according to their requirements. Cows restrictively fed in late gestation have a higher feed intake in lactation and a lower mobilization of body reserves. The effect of energy intake post-partum plays only a minor role for performance parameters in lactation. Lipid mobilized from body reserves makes a substantial contribution to the energetic cost of milk production in early lactation and adipose tissue undergoes specific metabolic alterations. Adipose tissue is degraded to free fatty acids, which are used in liver for energy purposes. High lipid mobilisation promotes the development of a fatty liver and therefore a reduced gluconeogenesis.

• The KIPS Transactions:PartC
• /
• v.19C no.2
• /
• pp.145-148
• /
• 2012

In a distributed streaming system using an advanced coding scheme that encodes a video into multiple substreams, the capacity of the system depends on the amount of contribution of participating peers. Thus, an incentive mechanism for peers to contribute voluntarily is needed to increase system capacity. In addition, since peers are not only a provider but also a consumer in the system (i.e. prosumer), the overall capacity of the system must be allocated fairly among the peers while it must be allocated in a way that can maximize the net quality of experience of peers to increase system efficiency. In this paper, we propose a substream allocation method to solve the problems taking an optimization approach. Unlike the other optimization approaches, the proposed method is verified quantitatively in a simulation study that it can use the capacity of video streaming system efficiently while allocating fair amount of substreams among peers because it considers explicitly the prosumer characteristics of peers.

• Advances in environmental research
• /
• v.3 no.2
• /
• pp.173-183
• /
• 2014

A comprehensive mathematical model was developed for this study to estimate on-site and off-site GHG emissions from wastewater treatment plants (WWTPs). The model was applied to three different hybrid WWTPs (S-WWTP, J-WWTP, and T-WWTP) including anaerobic, anoxic, and aerobic process, located in Seoul City, South Korea. Overall on-site and off-site GHG emissions from S-WWTP, J-WWTP, and T-WWTP were $305,253kgCO_2e/d$, $282,682kgCO_2e/d$, and $117,942kgCO_2e/d$, respectively. WWTP treating higher amounts of wastewater produced more on-site and off-site GHG emissions. On average, the percentage contribution of on-site and off-site emissions was 3.03% and 96.97%. The highest amount of on-site GHG emissions was generated from anoxic process and the primary on-site GHG was nitrous oxide ($N_2O$). Off-site GHG emissions related to electricity consumption for unit operation was much higher than that related to production of chemicals for on-site usage. Recovery and reuse of biogas significantly reduced the total GHG emissions from WWTPs. The results obtained from this study can provide basic knowledge to understand the source and amount of GHG emissions from WWTPs and strategies to establish lower GHG emitting WWTPs.

• Journal of the Korean Society of Mineral and Energy Resources Engineers
• /
• v.55 no.6
• /
• pp.670-687
• /
• 2018

This paper reviews the structures, physical and chemical properties, origins and global distribution, amount of energy resources, production technologies, and environmental impacts of gas hydrates to understand the gas hydrates as future energy sources. Hydrate structures should be studied to clarify the fundamentals of natural gas hydrates, hydrate distributions, and amount of energy sources in hydrates. Phase equilibria, dissociation enthalpy, thermal conductivity, specific heat, thermal diffusivity, and fluid permeability of gas hydrate systems are important parameters for the the efficient recovery of natural gas from hydrate reservoirs. Depressurization, thermal stimulation, inhibitor injection, and chemical exchange methods can be considered as future technologies to recover the energy sources from natural gas hydrates, but so far depressurization is the only method to have been applied in test productions of both onshore and offshore hydrates. Finally, we discuss the hypotheses of environmental impacts of gas hydrates and their contribution to global warming due to hydrate dissociation.

• Journal of Electrochemical Science and Technology
• /
• v.12 no.1
• /
• pp.82-91
• /
• 2021

This study was conducted to investigate the effect of initial pH, current density, and electrolysis time on process performance in terms of decolorization and chemical oxygen demand (COD) removal from disperse dyebath wastewater (DDW) by mono-polar parallel laboratory scale electrocoagulation (EC) process. COD reduction of 51.3% and decolorization of 92.8% were obtained with operating cost of 0.19 €/㎥ treated wastewater for Al-Al electrode pair, while 90.5% of decolorization and 49.2% of COD reduction were obtained with operating cost of 0.20 €/㎥ treated wastewater for an Fe-Fe electrode pair. The amount of sludge production were highly related to type of the electrode materials. At the optimum conditions, the amount of sludge produced were 0.18 kg/㎥ and 0.28 kg/㎥ for Al-Al and Fe-Fe electrode pairs, respectively. High decolorization can be explained by the hydrophobic nature of the disperse dye, while limited COD removal was observed due to the high dissolved organic matter of the DDW based on auxiliary chemicals. Energy, electrode, and chemical consumptions and sludge handling were considered as major cost items to find a cost-effective and sustainable solution for EC. The contribution of each cost items on operating cost were determined as 10.0%, 51.1%, 30.5% and 8.4% for Al-Al, and they were also determined as 9.0%, 38.0%, 40.5% and 12.5% for Fe-Fe, respectively. COD reduction and decolorization were fitted to first-order kinetic rule.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.12
• /
• pp.101-110
• /
• 2017

According to the Statistics Korea in 2016, 56.9% of companies do not fairly pay compensation for employee invention, despite the increasing proportion of the inventions in corporations. One reason is that the objective calculation method for employee and patent's contribution and the clear standard of fair compensation have not been established. Therefore, this study proposes a new calculation method using DCF (Discounted cash flow) and AHP (Analytical hiearchy process) methodology to calculate the fair amount of employee invention compensation, and verified it through real case examples. As a result, 2.3 times higher amount of compensation was calculated than the previous approach. This study is meaningful that it provided objective compensation criteria that could more protect the inventor in the situation which the clear criteria for the calculation of fair compensation are not established. This methodology is expected to be applicable for SMEs as employee invention compensation.

• Journal of Korean society of Dental Hygiene
• /
• v.12 no.5
• /
• pp.881-896
• /
• 2012

Objectives : The purpose of this study was to examine the amount of daily fluoride intake among children using fluoride-containing dentifrice in an effort to pave the way for the selection of criteria for the development of safe dentifrice for different age groups to make a contribution to children's oral health. Methods : This study was implemented over approximately six months from May to October 2008 by recruiting subjects, asking their consent, conducting a survey, collecting samples and analyzing the collected data. The subjects in this study were preschool residents in Seoul and Gyeonggi province, who were at the western age of 2 to 5. The amount of fluoride withdrawn from their one-time toothbrushing was measured in two different ways. One was by using HMDS-facilitated modified diffusion method and fluoride ion electrode, and the other was by applying ion chromatography without the diffusion procedure. Results : The fluoride intake accounted for $46.5{\pm}19.1$ percent of the amount of fluoride used, and that percentage was statistically significantly different according to age(p<0.01). The one-time fluoride intake from dentifrice per weight(kg) was a mean of $0.009{\pm}0.006mg$. As a result of multiplying this amount by daily toothbrushing frequency, the daily fluoride intake from dentifrice per weight(kg) appeared to be $0.023{\pm}0.016mg$ on average. There was a large difference among the children in that regard, since that ranged from a low of 0.003mg to a high of 0.070mg. And age made a statistically significant difference to that(p<0.01). Conclusions : The above-mentioned findings of the study showed that the children's daily fluoride intake from dentifrice per weight was lower than the recommended daily fluoride intake from diets per weight for young children aged 1 to 12(0.05-0.07mg). However, there was a great disparity among the children in that aspect, and they are likely to take more fluoride from other things as well. Therefore it is required to prepare separate criteria for preschool and school-aged children.

• Journal of the korean society of oceanography
• /
• v.37 no.4
• /
• pp.224-231
• /
• 2002

Vertical distributions of coprostanol (5$\beta$-cholestan-3$\beta$-ol) and other sterols were investigated in the intertidal sediment of Shinbul island in the Han River estuary to estimate the short-term variations of fecal contamination in association with reclamation activity which caused a construction of tidal barrier and emigration of residents from the island. Quantitative contributions of coprostanol in total sterol (9.87-15.84%) and in total organic carbon (82.0-157.7 $\mu\textrm{g}$ g$^{-1}$ OC) implied that a substantial amount of organic matter associated with fecal pollutants was introduced into the sediment. The highest contribution of coprostanol to organic carbon that was observed between 0.3-0.9 cm depth seemed to be associated with increased human activities for the reclamation project of the island. The ratio of coprostanol to organic carbon decreased within 0.3 cm depth, which indicated decreased fecal contamination after the emigration of residents from the island. The results suggested that measurement of coprostanol could relevantly reflect short-term fluctuation of fecal contamination in the sediment of the Han River estuary.

• The International Journal of Costume Culture
• /
• v.7 no.2
• /
• pp.135-150
• /
• 2004

The purpose of this study is to explicate the contemporary concept of the term 'sportswear' by studying the history of sportswear tradition in America where sportswear was first established and developed. American sportswear originated from some functional clothes made for specific sports during the 19th century. Early in 20th century, there occurred many significant events in America while Americans were undergoing two successive world wars. First of all, due to the wars, women's role in labor force became so significant that their social status was enhanced remarkably. With economy growing every decade, the amount of leisure time for American people substantially increased and, therefore they could develop their leisure activity culture. All these changes made Americans demand the need for comfortable and functional clothes suitable for their changed way of life. In response to this demand, the sportswear tradition became mature due to the contribution by many creative All-American designers, most of whom have made their active contributions since 1970s. Now the sportswear, which used to be designed for specific sports, developed into casual wear in general with its extended definition. The contemporary concept of sportswear is no longer limited to those clothes for specific sports. Sportswear has now become more like a casual activity wear which all classes of people can enjoy in their life. Since the concept and scope of sportswear is extended to a great degree today, we need a new professional term to correctly express the extended nature of these contemporary clothes.

• Advances in concrete construction
• /
• v.2 no.1
• /
• pp.29-37
• /
• 2014

Increasing emphasis on energy conservation and environmental protection has led to the investigation of the alternatives to customary building materials. Some of the significant goals behind understaking such investigations are to reduce the greenhouse gasemissions and minimize the energy required formaterial production.The usage of concrete around the world is second only to water. Ordinary Portland Cement (OPC) is conventionally used as the primary binder to produce concrete. The cement production is a significant industrial activity in terms of its volume and contribution to greenhouse gas emission. Globally, the production of cement contributes at least 5 to 7 % of $CO_2$. Another major problem of the environment is to dispose off the fly ash, a hazardous waste material, which is produced by thermal power plant by combustion of coal in power generation processes. The geopolymer concrete aims at utilizing the maximum amount of fly ash and reduce $CO_2$ emission in atmosphere by avoiding use of cement to making concrete. This paper reports an experimental work conducted to investigate the effect of curing conditions on the compressive strength of geopolymer concrete prepared by using fly ash as base material and combination of sodium hydroxide and sodium silicate as alkaline activator.