• Journal of environmental and Sanitary engineering
• /
• v.8 no.2
• /
• pp.149-154
• /
• 1993

Authors investigated on the content of tin metals in 108 samples of tinplated canned fruit commercial. 1. The highest concentration of tin in 11 kinds of samples of canned fruit that is, apricot nectar was 114ppm and lowest of that 2.5∼3ppm. 2. There was 48.6ppm of tin content in orange nectar A that of pineapple nectar 56.6ppm in higher remarkably and that of the other samples was no appearance difference. 3. There was 114ppm(number 10), 5.3∼56.6ppm(number 8) and 8.7∼48.6ppm(number 3) of tin content in minimum between maximum concentration for difference remarkably and that of others there was no difference considerably, The highest concentration in detection frequency of content range was 8∼ 14ppm in 41. 7% and 2.5"6.6ppm in 36.1% and that of concentration was lower for comparison the others. 5. There was lower contration of tin in all samples for law of food hygiene in limitation 150ppm.

• Journal of the Korean Home Economics Association
• /
• v.26 no.1
• /
• pp.33-42
• /
• 1988

This study was done for the purpose of analysing the relationships between the clothing weight and health state on the kindergartners. The data were collected in July. Oct. 1986, and February, April. 1987, 324 kindergartners is Seoul. And those factors assumed in the study to have impacts on the clothing weight were, 1) Anthropometric measurement and BMI, Kaup-Index, % fat. 2) The motor ability 3) The health states assumed by application of cornell medical index and health state, Incidence, medical history. The results obtained were to follows. 1) In November, clothing weight was ghigh correlation between anthropometric measurements, BMI, Kaup-Index, motor ability and cornell-medical index. 2) The health problem scores were significant in total clothing weight, upper wear clothing weight, under wear clothing weight. 3) The relation between clothing weight and weight, BMI, motor ability and cold contration among the health state scores proves to be significant correlation.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.47 no.1
• /
• pp.51-59
• /
• 2005

The settling rate of the dredged soil may vary with mineral composition, grain size distribution, initial con contration and salt concentration of suspension of the site. A series of settling column test was performed to investigate the settling rate characteristics of solid suspension material from dredging and reclamation. The settling rate of soil mixed with various size of particles depended on clay fraction which showed a inherent flux. A model was developed to predict the particle flux of mixed soil from the clay flux and its applicability was verified.

• Journal of Society of Preventive Korean Medicine
• /
• v.12 no.1
• /
• pp.149-156
• /
• 2008

In the situation providing the aged society, the contents of the symptoms of senility centering around the aged-pulse condition were arranged. The results were as follows. In the questions about the aged symptoms, the results of indicating the gradual physical-age following the aged symptoms with the real age(from 40 to 100, 7 grade) and the gradual physical-age following the ageing grade of male and female (the 3 grade of the female / the 4 grade of the male) could have the differentiations. And the distinction of the aged pulse condition was observed two pulse condition ; the one is the minute pulse condition(Mi, Sei ;微細) as lowering function and the other is the Hyun, Ghin(弦, 緊) pulse condition as the blood's tention and contration.

• Proceedings of the KOSOMBE Conference
• /
• v.1992 no.05
• /
• pp.175-178
• /
• 1992

This paper proposes a method called linear prediction (a high performant technique in digital speech processing) for analyzing digital ECG signals. There are several significant properties indicating that ECG signals have an important feature in the residual error signal obtained after processing by Durbin's linear prediction algorithm. The ECG signal classification puts an emphasis on the residual error signal. For each ECG's QRS complex. the feature for recognition is obtained from a nonlinear transformation which transforms every residual error signal to set of three states pulse-cord train relative to the original ECG signal. The pulse-cord train has the advantage of easy implementation in digital hardware circuits to achive automated ECG diagnosis. The algorithm performs very well feature extraction in arrythmia detection. Using this method, our studies indicate that the PVC (premature ventricular contration) detection has a at least 90 percent sensityvity for arrythmia data.

• Journal of Environmental Health Sciences
• /
• v.16 no.2
• /
• pp.1-10
• /
• 1990

This study was performed to evaluate a applicability of TCM(Texas Climatological Model) model to a industrial area sush as CUNSAN and a possibility to provide necessary informaitons for air quality management. The air pollutants were measured at 6 sampling sites of GUNSAN industrial area from june to july in 1989. The model was checked by comparing the observed data with estimated data. The meteorological data for wind direction and wind speed were obtained from the observatory station in GUNSAN. The results are summarized as follows. 1. Average concentrations of air pollutants at all sampling sites were SO$_{2}$ 0.011-0.019 ppm. NO$_{2}$ 0.012-0.017 ppm. CO 0.6-1.0 ppm. TSP 45.8-64.2 $\mu$g/m$^{3}$. 2. The emission amounts show that point source are in general higher than area source. 3. As a results of correlation analysis, relationship between SO$_{2}$ concentration in the observed value and estimated value showed positive significance.(r = 0.766) 4. The sulfer content of the 1.6% at present to 0.8%, which means a 53.3% reduction. By controlling stack height could be lowered 14.5%, but the effective way of emission control is use of the lower sulfer fuels than controlling stack height. 5. The ratio between SO$_{2}$ contration in the observed value and estimated value showed 1.05. There-fore, the TCM model was quite effective in predicting air quality in GUNSAN industrial area.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.1
• /
• pp.10-15
• /
• 1997

Copper and its alloy had been used widely because of its pronouncing characteristics on their high thermal and electrical conductivity. Various fusion welding methods, such as SMAW, SAW, GTAW, GMAW, Electroslag welding amd so on are applied to weld copper and its alloy. But fusion welding of copper has so many welding problems. THe most serious problems were poor penetration amd high thermal contration stress due to its high thermal conductivity and porosity could be formed by rapid cooling rate of fusion welding. In order to avoid such fusion welding problems, preheating, peering and heat treatment must be applied to obtain sound weld joint of copper. But preheating induce another welding problem such as grain coarsening of weld heat affected zone. This grain coarsening reduces ductility and strength of weld joint. In this view of point, friction welding of copper is triedm to obtain sound weld joint of copper by reducing metallurgical problems. This study introduced new concept of heat input for evaluating the friction weldability of copper. As a result, weldability of copper could be evaluated by this new concept of heat input.

• Journal of Veterinary Clinics
• /
• v.17 no.2
• /
• pp.376-380
• /
• 2000

This study was performed to investigate the effect of activated charcoal on wound healing in an experimentally induced skin wound model. Full-thickness, skin defects ($2 cm{\times}2 cm$) were made in two different areas on the back of eight New Zealand white rabbits. Eight of 16 wounds were treated with gauze-gauze-impregnated activated charocal granules, and another eight wounds were treated with gauze-soaked saline. Wound areas were measured every other day for 2 weeks after the wound-ing. Statistical analysis was performed with the student t-test. The mean percentage of wound con- traction on the 14th day in the activated charcoal-treaded group and in the saline treated group were 93.5% and 81_7%, respectively. The mean value of tensile, strength ell the 21s1 day after wounding was,42.70{\pm}0.8 kg/5cm^2$,/TEX> in the activated charcoal-treated group and $1.75 {\pm} 0.5 kg/5 cm^2$ in the saline treated group. Significantly reduced wound area (p<0.05) and high tensile strength value (P<0.O5) were observed in activated charcoal-treated group compared with those in the saline treated group. In summary activated charcoa1 significantly reduced the wound area an increased tensile strength in the rabbit 7kin wound model. These results suggest that application of activated charcoal in skill wounds will promote wound healing.

• Physical Therapy Korea
• /
• v.1 no.1
• /
• pp.55-60
• /
• 1994

Thirty healthy adults aged 20 to 29 with no history of musculoskeletal or neurogenic disorder volunteered for this study. The contract-relax with agonist contration(CRAC) was applied to the right hamstring muscles with the subject in the supine position. Each hamstring group was stretched on three sucessive days with several repetitions of the technique lasting 1min, 3min, and 5min. respectively. Hamstring extensibility at the knee(ROM) was measured before and after stretching using on electronic digital inclinometer(EDI). The results, namely the increase in ROM, were analysed using one-way repeated ANOVA at p<0.05. The differences were not significant. Possible factors influencing the results are excessive sensitibility of the measuring instrument, the psychological and physical status of the subjects, and the level of muscle fatigue. The mean increases in ROM were 3.0 at 1min., 2.6 at 3min, and 2.1 at 5min. Inclusion of a control group would have further defined the effects of the stretching technique.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.1
• /
• pp.41-48
• /
• 1998

An investigation made of the easing contraction ratio according to sewing conditions (eased seam angle; 0$^{\circ}$ 20$^{\circ}$ 30$^{\circ}$ 45$^{\circ}$ 60$^{\circ}$ 70$^{\circ}$ 90$^{\circ}$, stitch density; 38 stitches/3 cm(N1.0), 26 stitches/ 3 cm(N1.5), 19 stitches/3 cm(N2.0), 14 stitches/3 cm(N2.5), 12 stitches/3 cm(N3.0), thread; sp 60' s/2) by lockstitch industrial sewing machine with shirring foot. The results abstained were as follows: 1. The lower the stitch density , the higher the easing contraction ratio. 2. The easing contraction ratio at 0$^{\circ}$ and 90$^{\circ}$ were lower than bias angles (20$^{\circ}$, 30$^{\circ}$, 45$^{\circ}$, 60$^{\circ}$, 70$^{\circ}$). 3. As the results of visual test, the maximum easing conditions were Fl -0$^{\circ}$.20$^{\circ}$.30$^{\circ}$.45$^{\circ}$-12 stitches/3 cm(N3.0), 60$^{\circ}$. 70$^{\circ}$. 90$^{\circ}$-14 stitches/3 cm(N2.5), F2 -0$^{\circ}$. 20$^{\circ}$.30$^{\circ}$.60$^{\circ}$.70$^{\circ}$.90$^{\circ}$-19 stitches/ 3 cm(N2.0), 45$^{\circ}$ -14 stitches/3 cm(N2.5), and F3 -0$^{\circ}$.20$^{\circ}$.30$^{\circ}$.45$^{\circ}$.60$^{\circ}$.70$^{\circ}$.90$^{\circ}$-19 stitches/3 cm (N2.0). 4. Approximately easing contraction ratio was obtained as 2.0% (N1.0)~ 10.2% (N3.0) in F1, 6.7% (N1.0)~ 15.7% (N2.0) in F2, and 5.2% (N1.0)~ 12.1% (N2.0) in F3, according to different angles on the sleeve cap curve line. 5. As a resets of SPSS PC) statistics analysis, it confirmed the relations which were observed between easing contration ratio and stitch density, and easing contraction ratio was correlated with bending properties.