• Journal of Welding and Joining
• /
• 제28권4호
• /
• pp.26-32
• /
• 2010

The purpose of this study is to evaluate the residual stresses at the multi-pass FCA weldment using the finite element analysis (FEA). In order to do it, an H-type specimen was selected as a test specimen. The variable used was in-plane restraint intensity. The temperature distribution at the multi-pass FCA butt weldment was evaluated in accordance with the relevant guidance recommended by the KWJS. The effective conductivity for the weld metal corresponding to each welding pass was introduced to control the maximum temperature below the vaporization temperature of weld metal. The heat flux caused by welding arc was assumed to be applied to the weld metal corresponding to welding pass. With heat transfer analysis results, the distribution of transverse residual stresses was evaluated using the thermo-mechanical analysis and compared with the measured results by XRD and uniaxial strain gage. In thermo-mechanical analysis, the plastic strain resetting at the temperature above melting temperature of $1450^{\circ}C$ was considered and the weld metal and base metal was assumed to be bilinear kinematics hardening continuum. According to the comparison between FEA and experiment, transverse residual stresses at the multi-pass FCA butt weldment obtained by FEA had a good agreement with the measured results, regardless of in-plane rigidity. Based on the results, it was concluded that thermo-mechanical FE analysis based on temperature distribution calculated in accordance with the KWJS’s guidance could be used as a tool to predict the distribution of residual stress of the multi-pass FCA butt weldment.

• 한국소음진동공학회논문집
• /
• 제15권12호
• /
• pp.1389-1397
• /
• 2005

Since blast-induced vibration may cause serious problem to the rock mass as well as the nearby structures, the prediction of blast-induced nitration and the stability evaluation must be performed before blasting activities. Dynamic analysis has been increased recently in order to analyze the effect of the blast-Induced vibration. Most of the previous studies, however, were based on the continuum analysis unable to consider rock joints which significantly affect the wave propagation and attenuation characteristics. They also adopted pressure corves estimated tv theoretical or empirical equations as input detonation load, thus there were very difficult to reflect the characteristics of propagating media. In this study, therefore, we suggested a dynamic distinct element analysis technique which uses velocity waveform obtained from a test blast as an input detonation load. A distinct element program, UDEC was used to consider the effect of rock joints. In order to verify the validity of proposed method, the test blast was simulated. The predicted results from the proposed method showed a good agreement with the measured vibration data from the test blast. Through the dynamic numerical modelling on the planned road tunnel and slope, we evaluated the effect of blast-induced nitration and the stability of rock slope.

• 비파괴검사학회지
• /
• 제34권1호
• /
• pp.60-67
• /
• 2014

본 연구에서는 사장교의 핵심부재인 케이블 점검을 위한 자동화 검사 시스템을 개발하였다. 강자성체로 이뤄진 연속체 구조물인 케이블의 내외부 검사에 적합한 비파괴검사법으로는 선행연구를 통해 검증된 누설자속탐상법이 적용되었고, 홀센서와 영구자석을 이용하여 다채널의 누설자속 측정용 자기센서헤드를 제작하였다. 또한 케이블 검사의 자동화로 접근성을 높이기 위해 사장교 케이블을 따라 이동할 수 있는 바퀴굴림 방식의 케이블 등반 로봇을 설계 및 제작하였고, 로봇을 다양한 디바이스에서 모니터링 및 제어하기 위한 컨트롤 프로그램을 제작하였다. WLAN 방식의 무선통신기술을 적용하여 원격으로 계측 데이터 전송 및 로봇제어를 가능하게 하였다. 최종적으로 본 연구를 통해 개발된 세부 기술들이 연동된 누설자속탐상법 기반 케이블 이동형 진단 시스템을 이용하여 실제 운용중인 서해대교의 케이블을 대상으로 현장 시험을 수행함으로써 본 시스템의 현장 적용성을 검증해보았다.

• 한국광물학회지
• /
• 제25권2호
• /
• pp.95-104
• /
• 2012

자연 석면 산출지의 투각섬석-양기석에 대한 전자현미경관찰 결과, 섬유상, 침상, 주상의 다양한 입자 형태가 관찰되었다. 섬유상 입자들은 일정한 너비로 가늘고 길게 휘어지며, 로프 모양의 다발이나 매트를 형성한다. 침상 입자들은 평행한 다발을 형성하나 장축 방향으로 쉽게 갈라지며 탄성이 있다. 주상 입자는 분쇄과정에서 벽개를 따라 쪼개지며 종횡비가 짧은 침상입자를 형성한다. 입자의 형태적 특성은 산출지별로 다르며 하나의 시편 내에서도 차이가 관찰된다. 투각섬석-양기석 계열의 각섬석은 섬유상에서 주상까지 형태적 연속체를 형성하므로 석면상 각섬석에 대한 유해성 평가를 위해서는 형태적 특성과 발암 특성 간의 인과관계에 근거한 동정 기준 및 시료준비과정이 수립되어야 한다.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2005년도 춘계 학술대회
• /
• pp.231-238
• /
• 2005

본 연구에서는 유동저항이론을 기초로 하여 연속다공체, 분리단열망 및 연속다공체-분리단열망 공존암반과 같은 3가지 암반을 대상으로 암반 특성에 따른 지하수 유동저항 개념 모델링 및 관계식을 제안하였다. 정상상태조건에서 밀도변동은 고려하지 않았으며 유한 체적법을 이용하였다. 각종 물성치는 블록 중심에서 정의되고, flux는 블록면에서 정의되는 staggered 격자 체계하에서 모든 블록에 대해 Darcy 법칙이 적용되었다. 접촉면에서의 투수계수는 인접면 중심에서 정의된 물성치의 조화평균값을 사용하였다. 유동저항개념을 이용하여 인접한 블록간의 상대압력차와 flux의 관계를 표현하였다. 개개의 단열에서의 유동은 다공암반에서 이용된 방정식과 동일한 형태의 2차원 방정식으로 모사되었다. 본 논문에서 제안된 모델은 추후 다양한 암반 특성별 유동 모사 기법을 개발하는데 많은 기여를 할 것으로 기대된다.

• 디자인학연구
• /
• 제3권1호
• /
• pp.17-33
• /
• 1990

Evaluation plays an essential role in design activity. Many theorist have agreed that designing involves problem solving or decision making. In evaluation, designers attempt to determine the value of a particular proposal arrived at by synthesis. And the results of designing, the product, is evaluated twice, objectively and subjectively.Alternatives in $$\mu$ti-objective decision problems generally possess numerous attributes by which they can be described and compared. The evaluation factors include all attributes that have levels specified by quantitative and qualitative objectives. However since qualitiative factors are difficult to quantify as $$\mu$eral estmates, these factors have tended to be ignored without regard for their importance to human content. Therefore we need some study that convert qualitative attributes into quantitative scale values. Following to Thurstone' s Psychological scaling methods (The method of successive intervals), attribute values of TV set are assigned by rating scale methods. The method of successive intervals, like the method of equal-appearing intervals, requires but a single judgement from each subject for each statement to be scaled. It is, therefore, a convinient method to use when the number of to be scaled is large. We make the assumtion that those cu$$\mu$ative proportion distributions are normal for each statement when they are projected on the unknown psychological continuum. In this study, we have determined the scale values of 42 statements of TV set by the method of successive intervals. Then we can apply a test of internal consistency similar to that used with the method of paired comparisons. We have as our absolute average deviation, -1.748/252= -0.0069. We have reason to believe that our scale values are consistent with the empirical data, because these discrepanicies are very small.

• 한국자동차공학회논문집
• /
• 제19권5호
• /
• pp.134-142
• /
• 2011

Although combustion is essential in most energy generation processes, it is one of the major causes of air pollution. Exhaust pipes with circular fin were designed to study the effect of cooling the recirculated exhaust gases (EGR) of Diesel engines on the chemical composition of the exhaust gases and the reduction in the percentages of pollutant emissions. The gases examined in this study were oxides of nitrogen (NOx), carbon dioxide ($CO_2$) and carbon monoxide (CO). In addition, $O_2$ concentration in the exhaust was measured. The designs adopted in this study were about exhaust pipes with solid and hollow fins around them direct surface force measurement in water using a nano size colloidal probe technique. The direct force measurement between colloidal surfaces has been an essential topic in both theories and applications of surface chemistry. As particle size is decreased from micron size down to true Carbon nano Colloid size (<10 nm), surface forces are increasingly important. Nano particles at close proximity or high solids loading are expected to show a different behavior than what can be estimated from continuum and mean field theories. The current tools for directly measuring interaction forces such as a surface force apparatus or atomic force microscopy (AFM) are limited to particles much larger than nano size. This paper use Water and CNC fluid at normal cooling system of EGR. Experimental result showed all good agreement at Re=$2.54{\times}10^4$ by free convection and Re=$3.36{\times}10^4$ by forced air furnace.

• 한국지반공학회논문집
• /
• 제34권7호
• /
• pp.29-38
• /
• 2018

액상화 시 지반-말뚝 시스템의 동적 거동을 정확히 예측하기 위해 상용 유한 차분 프로그램인 FLAC3D를 이용하여 시간영역에서 3차원 수치 모델링을 수행하였다. 지반의 전단변형에 따른 간극수압의 발달을 직접적으로 모사하기 위해 유효응력 해석법을 이용한 액상화 모델인 Finn model을 적용하였으며 Mohr-Coulomb 탄소성 모델에 접목되어 해석이 수행되었다. 이력감쇠모델을 적용하여 지반 비선형 거동을 고려하였으며 지반과 말뚝 간의 분리현상, 미끄러짐 현상을 모사하는 인터페이스 모델을 적용하였다. 경계조건으로써 단순화 연속체 모델링 기법을 도입하여 반사파의 생성을 막고 해석 효율을 증가시켰으며 적절한 최대지반탄성계수와 항복 깊이의 설정으로 비선형 거동을 정확히 모사하고자 하였다. Wilson(1998)이 수행한 원심모형시험 케이스 중 상부지반 상대밀도가 55%인 모델을 이용하여 제안된 모델링 기법의 캘리브레이션을 수행한 결과, 수치해석으로부터 도출된 깊이 별 과잉간극수압 비-시간 이력, 휨모멘트-시간이력, 말뚝 두부 변위-시간이력이 실험 결과를 잘 모사하였다. 상부지반 상대밀도가 30%인 모델의 결과를 이용하여 제안된 모델링 기법의 적용성 평가를 수행한 결과, 수치해석으로부터 도출된 지반 및 말뚝 응답이 실험 결과를 잘 모사하였으며 제안된 모델링 기법이 지반-말뚝 시스템의 액상화 거동을 적절히 모사한다고 판단되었다.

• 천문학회지
• /
• 제29권2호
• /
• pp.245-253
• /
• 1996

We have analyzed infrared (IR) images of Jupiter which was observed at the McDonald Observatory, Texas, U.S.A., during the P/SHoemaker-LEvy 9 (SL9) impact period and about one week after the last impact. The IR images were obtained on the 2.7m telescope using a NICMOS array with filters to isolate the $1.5{\mu}m\;NH_3\; band,\;the\;2.3{\mu}m\;CH_4\;band,\;the\;2.12{\mu}m\;H_2\;S(0)$ pressure-induced absorption, and the continua at $1.58{\mu}m\;and\;2.0{\mu}m$ (short K-band). All images except those with the $1.58{\mu}m$ continuum filter show bright impact sites against the relatively dark Jovian disk near the impact latitude of about $45^{\circ}$ S. This implies that dusts originated from the impacts reflect the solar radiation at high altitudes before absorbed by stratospheric $CH_4,\;NH_3 \;or\;H_2$. The impact sites observed with the $2.3{\mu}m$ filter are conspicuously bright against a very dark background. The morphology of impact sites, G, L, and H at 2.3 and $2.12{\mu}m$ filters shows clearly an asymmetric structure toward the incident direction of the comet fragments, in agreement with the studies of visible impact images obtained with the Hubble Space Telescope. Comparisons of reflectances of G, L, and H sites with simple radiative transfer models suggest that optically thick dust layers were formed at high altitudes at which methane absorption attenuates incoming sunlight only by about $1\%$. The dust layers in these sites seem to form at about the same altitude regardless of the magnitude of the impacts, but they appear to descend gradually after the impacts. The dust layers have optical depths of 2-5, according to the models.

• 천문학회지
• /
• 제37권4호
• /
• pp.281-284
• /
• 2004

Optical imaging and spectroscopy of G353.2+0.9, the brightest part of the giant H II region NGC 6357, shows that this H II region is optically thin, contains ${\~}300\;M_{\bigodot}$ of ionized gas and is probably expanding into the surrounding medium. Its chemical composition is similar to that found in other H II regions at similar galactocentric distances if temperature fluctuations are significant. The inner regions are probably made of thin shells and filaments, whereas extended slabs of material, maybe shells seen edge-on, are found in the periphery. The radio continuum and H$\alpha$ emission maps are very similar, indicating that most of the optical nebula is not embedded in the denser regions traced by molecular gas and the presence of IR sources. About $10^{50}$ UV photons per second are required to produce the H$\beta$ flux from the 1l.3'${\times}$10' region surrounding the Pis 24 cluster that is south of G353.2+0.9. Most of the energy powering this region is produced by the 03-7 stars in Pis 24. Most of the 2MASS sources in the field with large infrared excesses are within G353.2+0.9, indicating that the most recent star forming process occured within it. The formation of Pis 24 preceded and caused the formation of this new generation of stars and may be responsible for the present-day morphology of the entire NGC 6357 region.