• 제목/요약/키워드: continuously variable transmission

검색결과 107건 처리시간 0.021초

볼 형태 가동플랜지를 갖는 건식 무단변속기에 관한 실험적 연구 (An Experimental Study on the Dry CVT with Movable Flange of Ball Type)

  • 정상훈;이한성;함성훈;권영웅
    • 한국기계기술학회지
    • /
    • 제13권2호
    • /
    • pp.129-135
    • /
    • 2011
  • Dry CVT(Continuously variable transmission) consists of a driving pulley and a driven pulley joined by rubber V-belt. Each pulley consists of a fixed flange and a movable flange. The movable flange of the driving pulley has the centrifugal roller and a ramp plate in the flange. The movable flange moves toward a fixed flange under the actuation of a centrifugal roller, as the driving pulley speed increases. The main advantages of the Dry CVT with V-belt, which has been popular in Asia, are a simple mechanism, less maintenance and low cost. The important claim which have an influence on the performance of the Dry CVT is the wear of the centrifugal roller. In this study ball type is proposed instead of roller type of movable flange to resolve claim. Also experiments are carried out for new model to evaluate performances.

음성 파형의 Embedded 부호화에 관한 연구 (Embedded Waveform Coding of Speech)

  • 이형호;은종관
    • 대한전자공학회논문지
    • /
    • 제21권3호
    • /
    • pp.73-83
    • /
    • 1984
  • 본 논문에서는 embedded ADPCM, embedded ABM 및 delayed decision 방식을 사용한 system이 실제 음성을 부호화할 때 그 성능을 연구하였다. Embedded ADPCM과 ADM 부호화기는 종래의 ADPCM과 ADM 부호화기를 개조함으로써 얻어졌다. Embedded ADPCM 부호화기는 기본적으로 Cummiskey에 의해 최초로 제안된 바 있는 ADPCM을 기초로 하고 있다. Embedded ADM system은 CVSD와 HCDM system을 개조하여 만들었다. 이들 embedded 부호화기 중에서 embedded HCDM의 성능이 다른 부호화기에 비하여 16kbits/s에서 64kbits/s의 넓은 범위의 전송률에 걸쳐 우수하다. Embedded ADPCM에 delayed decision 방식을 적용하면 모든 전송률에서 성능이 크게 향상된다. 그러나 16kHz로 sample되는 embedded ADM system에 있어서는 같은 수의 지연 sample을 가진 embedded ADPCM에서 만큼 크게 성능이 향상되지는 않음을 알아내었다.

  • PDF

Dynamometer Test for the CVT System using Spring

  • Kwon, Young-Woong;Yang, Seung-Bok
    • International journal of advanced smart convergence
    • /
    • 제11권3호
    • /
    • pp.222-228
    • /
    • 2022
  • As a means to cope with the climate change crisis caused by global warming, automobile manufacturers continue to make efforts to use the driving energy of vehicles as electricity. As a result, parts industry such as battery, motor, and controller are attracting attention. China is often seen in large cities, with electric vehicles such as electric bicycles, electric motorcycles, and small electric vehicles popularized and commercialized, mainly in large cities. However, small electric vehicles are not popular in Korea, which is why the country's topography is high in hills. In order to drive the hilly domestic roads, power performance including vehicle climbing ability should be improved. In order to improve the power performance and the climbing capacity of small electric vehicles, the capacity of the motor should be increased. However, when the performance of the motor is improved, the weight of the motor becomes heavy and the price competitiveness is likely to decrease. In addition, in order to operate a high-performance motor, the power consumption of the battery is rapidly increased, so various problems must be solved. In order to commercialize a small electric vehicle for one or two people who do not emit harmful exhaust gas to the human body in a hilly domestic terrain, it is effective to have a separate transmission system. In this study, we were conducted dynamometer test to produce a continuously variable transmission(CVT) system prototype using a spring that can be applied to a small electric vehicle and to install a CVT system prototype manufactured in a small electric vehicle. The dynamometer test results showed that the maximum speed performance, acceleration performance, and climbing performance were improved.

편심캠을 이용한 소형감속기의 변속특성에 관한 연구 (Study on Shift characteristic of Small reducer using Eccentric arm)

  • 염광욱;함성훈
    • 한국산학기술학회논문지
    • /
    • 제18권3호
    • /
    • pp.609-614
    • /
    • 2017
  • 본 연구에서는 부피는 기존 1단 감속기와 동일한 수준을 유지하면서 2단의 감속비를 갖는 소형감속기에 대한 개발을 위하여 새로운 형태의 편심캠을 이용한 감속기의 연구를 진행하였다. 따라서 자동차에 적용되는 무단변속기의 개념을 이용하여 2단 감속기를 설계하였다. 캠은 감속풀리와 가속풀리에 각각 연결되어있는 V-벨트를 압착하여 미끄러짐을 최소화하기 위하여 텐셔너 역할을 할 수 있도록 $180^{\circ}$의 위상차를 두고 편심형태를 가지는 구조로 설계하였다. 또한 캠의 직경을 35mm로 하고, 외경의 폭을 18mm로 하여 v-벨트의 외측부분과 캠이 완벽하게 접촉할 수 있는 구조로 설계하였다. 감속을 위한 저속 풀리는 입력축에 지름 50.8mm의 풀리를 설치하고, 출력축에 지름76.2mm의 풀리를 설치하였다. 가속을 위한 고속 풀리에는 입력축에 지름 76.2mm의 풀리를 설치하고, 출력축에 지름 50.8mm의 풀리를 설치하였다. 설계된 내용을 토대로 변속기의 동력전달효율실험과 발열특성에 대한 실험을 진행하여 타당성을 검증하였다. 또한 타당성 검증을 통하여 감속기의 적합성을 증명하였다.

V-벨트 무단변속기(無斷變速機)를 이용(利用)한 자탈형(自脫型) 콤바인의 주행속도(走行速度) 제어(制御)(I) (A Forward Speed Control of Head-feed Combine Using Continuously Variable V-belt Transmission -Combine Load Characteristics-)

  • 최규홍;유관희;조영길;박판규
    • Journal of Biosystems Engineering
    • /
    • 제16권2호
    • /
    • pp.124-132
    • /
    • 1991
  • This study was carried out to obtain the information needed in the development of forward speed control system and the improvement of combine performance. The effects of variety, grain moisture content and forward speed on the combine load characteristics were investigated through experiments. The results of this study are summarized as follows. 1. A data acquisition system was developed to measure the engine speed and the torques and speeds of the threshing cylinder, dean-grain auger and tailings-return auger. The system consisted of transducers, signal conditioner, interface board and microcomputer. The system accuracy is better than ${\pm}2.3%$ full scale. 2. Linear regression equations were obtained for the torque, speed and power requirement of threshing cylinder for different paddy varieties, grain moisture contents and feed rates. 3. The maximum value of relative frequency for threshing cylinder torque decreased as the increase in feed rate and moisture content. The range of torque fluctuation was 1.2~3.7 and 1.2~1.9 times the average and maximum torque, respectively. The maximum value of power spectrum density (PSD) appeared to be about 11 Hz regardless of paddy variety, grain moisture content and feed rate. 4. The speed of tailings return thrower decreased rapidly at below 900rpm, and it fell to near zero about 3 seconds after that time. When the travelling of combine harvester was stopped immediately after sensing the overload, it took about 7 seconds for a full recovery of the no-load speed of tailings return thrower.

  • PDF

구면무단변속기에서 발생하는 2 차원 구름 마찰력의 실험적 해석 (Experimental Analysis of 2-Dimensional Rolling Ftiction Occurred in Semi-Spherical CVT)

  • 공진형;윤영민;이응신;임원식;박영일;김동조;이장무
    • 한국자동차공학회논문집
    • /
    • 제13권5호
    • /
    • pp.134-141
    • /
    • 2005
  • Semi-Spherical Continuously Variable Transmission(SS-CVT) is the CVT which transmits power by rolling friction between dry metals, and its outstanding advantage is the ability of realizations of neutral, forward and reverse states without relying on any other devices. A spherical shaped variator transmits power and also changes gear ratio where keeping contact with a output disk. The frictional direction to transmit power and the other direction to change gear ratio are perpendicular to each other, so we can describe that two dimensional rolling friction is occurred in the contact point between the variator and the disk. Since magnitudes or relations of the two forces are completely unknown, they were analyzed by the experiments in this study. We determined the variables related with the friction phenomena by the dimensional analysis, and manufactured the SS-CVT test bench which could measure the related variables. Finally, the empirical formula for evaluating the two friction forces was proposed based on the experimental results.

자전거용 크랭크 일체형 자동변속기에 대한 특성 해석 (Characteristics Analysis of CVT with Built-in Crank for Bicycle)

  • 백승엽
    • 한국산학기술학회논문지
    • /
    • 제16권2호
    • /
    • pp.963-969
    • /
    • 2015
  • 자전거는 환경공해 능력과 웰빙에 대한 관심증가 때문에 가장 유망한 미래 교통수단 중의 하나이다. 실제 자전거에 적용될 무단변속기를 제작하기 전에 신뢰성이 확보된 시뮬레이션 프로그램을 통하여 문제점을 초기에 확인하고, 각 링크의 소재 및 두께 등의 설계인자 최적화와 능력을 평가할 필요가 있다. 이 같은 과정을 통하여 무단 변속기 시스템 설계 과정에서의 소요비용을 줄일 수 있다. 본 논문에서는 설계인자를 확정하기 위해 응력해석을 수행되었으며. 전체 모델링 중에서 각 링크와 조인트 부분을 주요 설계인자로 가정하고 각각의 링크 및 조인트의 영향도 및 작동 시 받은 응력들을 CAE를 통해 확인하였다. 또한, 해석 영역에 대하여 적절한 수학적 모델링을 통해 맥동 현상을 계산할 수 있는 전용 code를 개발하였으며, 이를 Matlab에 적용하여 해석 결과를 graphic화하여 분석하였다.