• Journal of Information Processing Systems
• /
• v.19 no.2
• /
• pp.267-274
• /
• 2023

As the Internet has expanded and the continuous expansion of online shopping in China, many rural areas also have sales outlets. Due to the impact of economic conditions, rural locations have inadequate e-commerce logistical infrastructure, the number of outlets is small, and each other is in a decentralized state. For various reasons, the advancement of rural e-commerce logistics lags far behind that in urban areas. As the Internet of Things with big data grow in popularity, we can create and enhance the assurance system for the booming ecommerce in rural areas by building the support system of rural online shopping platform, and strengthening the joint distribution of logistics terminals based on data mining, so as to encourage the quick and healthy growth of rural online shopping.

• Physical Therapy Korea
• /
• v.10 no.1
• /
• pp.15-27
• /
• 2003

Therapeutic ultrasound is commonly applied for deep heating in physical therapy setting. However, it is difficult to determine the exact application dosage and to confirm the immediate heating effect. Microwave Radio-Thermometer (MRT) can measure the temperature by the electromagnetic energy in the microwave region of the object that emits above absolute zero temperature. MRT was used for early diagnosis of breast cancer since it was not harmful, non-invasive, and non-ionizing to the human body. The purposes of this study were to investigate how accurately 1.1 GHz RTM (RES Ltd. Russia) measures the change of average temperature in the tissue, and to determine the depth of temperature change measurement. Therapeutic ultrasound was applied (continuous wave for 5 minutes, 1 MHz, intensity of 1.5 $W/cm^2$ [in vitro] and 1.0 $W/cm^2$ [in vivo]) in four different conditions: (1) 30 cases of in vitro specimen of pork, (2) 30 cases of in vitro specimen of pork ankle joint, (3) 10 cases of in vivo canine thigh, and (4) 30 cases of in vivo human body. Intraclass Correlation Coeffients (ICC[3,1]) between average needle probe thermometer below surface and MRT temperature was revealed as followed: (1) Before ultrasound application ICCs ranges above .8 in specimen of pork (15 mm underneath the skin) and above .82 in specimen of pork ankle joint (10~30 mm underneath the skin). (2) After ultrasound application ICCs ranges above .7 in both specimens of pork and pork ankle joint. (3) Before ultrasound application ICCs ranges above .8 in canine thigh (20 mm underneath the skin). (4) After ultrasound application ICCs ranges above .82 in canine thigh. The temperature of the human body increased significantly with the mean of $15^{\circ}C$ in muscle tissue and with the mean of $3.5^{\circ}C$ in joint (p<.00). It was revealed that the average depth of temperature measurement of the tissue by MRT was in between 10 and 35 mm, and determined that the proper temperature measurement band was $36.5{\sim}37.0^{\circ}C$.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.1
• /
• pp.31-41
• /
• 2006

The primary purpose of a TKA is to restore normal knee function Therefore, ideally, a TKA should: (a) maintain the natural leverage of the knee joint muscles to ensure generating adequate knee muscle moments to accomplish daily tasks such as rising from climbing stairs; (b) provide adequate knee joint stability. A 16-channel MyoResearch XP EMG system was used to collect the differential input surface electromyography signals VM, VL, RF, BF, ST during climbing/descending stair tests. A Peak Motion Measurement System was used to collect the kinematic and kinetic data. AKIN-COM Ill isokinetic dynamometer was used for EMG of VM, VL, RF, BF and ST during maximal voluntary contraction. I Quadriceps EMG results for the VM of the passed 1year group limb demonstrated significant less RMS EMG than that of the passed 3year group limb $60^{\circ}-15^{\circ}$ of knee flexion(p<0.05). The VL of the passed 1year group limb also demonstrated significants less RMS EMG than that of the passed 3year group limb from $60^{\circ}-45^{\circ}$ of knee flexion(p<0.05). Similar to the VM and VL, the RF of the passed 1year group limb showed less RMS EMG than that of the passed 3year group limb from $60^{\circ}-30^{\circ}$ do knee flexion(p<0.05). Hamstring EMG results for the BF of the passed 1year group limb demonstrated less RMS EMG than that of the passed 3year group limb from $75^{\circ}-15^{\circ}$ of knee flexion(p<0.05). The passed 1year group limb tended to have less ADD displacement(p<0.071) than that of the passed 3year group limb. There was no significant difference of the ABD displacement between the passed 1year group and the passed 3year group limbs(p<0.73). The passed 3year group used compensatory adaptation movement strategies to compensate for the strength deficit of passed 3year group limbs. The passed 3year group limb also increased the quadriceps muscle activation level to produce more knee extension moment to compensate for the short quadriceps moment arm. The passe 3year group limb might have an unstable knee joint in the medio-Iateral direction during the climbing/descending by showing a tendency of more ADD displacement and greater hamming co-activation EMG than the passed 1year group limbs. The TKA design was not able to help the knee joint to produce adequate knee extension moment with less quadriceps muscle effort. I think that old man needs continuous exercise for muscle strength.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.2
• /
• pp.169-177
• /
• 2016

Sliding slab track system, which consists of low friction sliding layer between track slab and bridge deck, is recently devised to reduce track-bridge interaction effect of continuously welded rail(CWR) without applying special devices such as rail expansion joint(REJ). In this study, a series of track-bridge interaction analyses of a long-span bridge with sliding slab track and REJ are performed respectively and the results are compared. The bridge model includes PSC box girder bridge with 9 continuous spans, and steel-concrete composite girder bridge with 2 continuous spans. The total length of the bridge model is 1,205m, and the maximum spacing between the two fixed supports is 825m. Analyses results showed that the sliding slab track system is highly effective on interaction reduction since lower rail additional axial stress is resulted than REJ application. Additionally, horizontal reaction forces in fixed supports were also reduced compared to the results of REJ application. However, higher slab axial forces were developed in the sliding slab track due to the temperature load. Therefore, track slab section of the sliding slab track system should be carefully designed against slab axial forces.

• Journal of the Korea Concrete Institute
• /
• v.27 no.1
• /
• pp.29-35
• /
• 2015

Recent studies to develop Very Large Floating Structure(VLFS) has shown that the construction procedure of the structure needs to acquire precast concrete module connection system using prestressing. However, the loads occurring on water are complex combinations of various condition, so the safe and stable performance of the module joints and bonding materials are key to the success of the construction. Therefore, micro-silica mixed aqua-epoxy development was introduced in Part 1 using a bonding material developed in this study. The performance of the micro-silica mixed aqua-epoxy(MSAE) applied joint of concrete module specimens connected by prestressing tendon was evaluated to verify the usability and safety of the material. RC beam, spliced beam connected by prestressing tendon and MSAE, and continuous prestressed concrete beam were tested for their initial cracking and maximum loads as well as cracking procedure and pattern. The results showed that the MSAE can control the stress concentration effect of the shear key and the crack propagation, and the maximum load capacity of MSAE joint specimens are only 5% less than that of continuous RC specimen. The details of the study are discussed in detail in the paper.

• Proceedings of the KIEE Conference
• /
• 2006.04b
• /
• pp.310-312
• /
• 2006

Maglev using EMS becomes unstable by unexpected big air-gap disturbance. The main causes of the unexpected air-gap disturbance are step-wise rail joint and large distance between rail splices. For the stable operation of the Maglev, the conventional system uses the threshold method, which selects one gap sensor among two gap sensors installed on the magnet to read the gap between magnet and guide rail. But the threshold method with a wide bandwidth makes the discontinuous air-gap signal at the rail joints because of the offset in air gap sensors and/or the step-wise rail joins. Further more, in the case of the one with a narrow bend-width, it makes Maglev system unstable because of frequent alternation. In this paper, a new method using fuzzy rule to reduce air-gap disturbances proposed to improve the stability of Maglev system. It treats the air-gap signal from dual gap sensors effectively to make continuous signal without air gap disturbance. Simulation and experiment results proved that the proposed scheme was effective to reduce air-gap disturbance from dual gap sensors in rail joints.

• Journal of Arbitration Studies
• /
• v.21 no.1
• /
• pp.259-277
• /
• 2011

In 2008, North Korea revised its Foreign Economic Arbitration Act. To some extent, the new Act reflected such international standard of arbitration as UNCITRAL Arbitration Rules. In this paper, the said Act will be evaluated, and then cooperation ways of South-North Korea on Inter-Korean Commercial Arbitration will be suggested. In 2007, the Ministry of Unification has designated the Korean Commercial Arbitration Board as Inter-Korean Arbitration Committee and has made efforts to prepare follow-up measures on the two Agreements of Inter-Korean Commercial Arbitration. In 2008 however, the follow-up measures has in fact been suspended. In order to revitalize the Inter-Korean commercial arbitration, some prerequisites must be satisfied. First, Inter-Korean Arbitration Committee for Inter-Korean commercial arbitration should re-open as soon as possible. Second, as North Korea recently shows interest in joining the New York Convention on the Recognition and Enforcement of Foreign Arbitral Awards(now so called New York Convention), Governmental Authority of Rep. of Korea should also actively assist and support their joining in New York Convention. Third, both Korean governments should carry out joint study on raising the efficiency of the arbitration system which they will use. Fourth, comparative study on arbitration systems used in both countries should be conducted. Also, it may is very timely to discuss the issue in international arbitration community such as "North-East Asia International Arbitration Conference" or other similar events. In conclusion, continuous study on prevention of commercial disputes between South-North Korea and ways to resolve disputes when they arise should be conducted.

• Journal of Fisheries and Marine Sciences Education
• /
• v.6 no.1
• /
• pp.77-91
• /
• 1994

The Yellow Sea and the East China Sea are the most important fishing grounds for the fishing industry of Korea, China and Japan which are major coastal states of these Seas. But the fishery resources in these fishing grounds are almost exhausted and also the sea region is seriously polluted. Accordingly an international joint countermeasure is necessary to recover the fishery resources and to keep the fishery a continuous industry. The authors inspected the existing fishery policies and international fishery relationship of the three coastal states, and suggested rational conservation and management regime of the fishery resources in these sea regions. 1. At present the legal status of the sea region beyond territorial sea is the high sea, for that reason the international cooperation is urgently needed to establish common regime for conservation and management of the fishery resources. 2. A series of scientific research on ecological system of fishery resources must be carried out in the sea region first of all for that purpose. 3. The existing Korea-Japanese Fishery Agreement and Sino-Japanese Fishery Agreement should be reformed to coincide with the new legal order of the UNLOS Convention, and the Sino-Korean Fishery Agreement should be concluded newly on the identical line. 4. As a conclusion, a joint conservation and management regime through a regional fishery organization or a individual conservation and management regime through the promulgation of exclusive economic zone by each state can be suggested to resolve the fishery resources conservation problem in the Yellow Sea and the East China Sea.

• Journal of Korean society of Dental Hygiene
• /
• v.9 no.4
• /
• pp.620-632
• /
• 2009

Objectives : The present study purposed to survey the oral health-related quality of life among elderly in metropolis Methods : We had individual interviews and oral survey using a questionnaire with 336 elderly who were using seniors' centers in Metropolitan City during the period from the $9^{th}$ to $31^{st}$ of July, 2007. Results : Factors of GOHAI showed the significant relation with types of health insurance, a large number of medication, perceived oral health status, perception of dental care needs those with pains in the temporomandibular joint, the number of natural teeth and the explanatory power or the final model was 25.5%. Factors of OHIP-14 showed the significant relation with types of health insurance, a large number of medication, perception of dental care needs those with pains in the temporomandibular joint, gingival bleeding, the number of natural teeth and the explanatory power or the final model was 26.6%. Conclusions : Oral health-related quality of life among elderly as factors by general characteristics of study subjects, by perceived heath status and oral health status, perceived oral symptoms and oral health status that were relevant. Accordingly, for the healthy maintenance of elders' natural teeth, it is considered necessary to develop and execute continuous oral health management systems and oral health education programs that promote preventive activities and enhance the perception of oral health.

• Journal of Welding and Joining
• /
• v.13 no.3
• /
• pp.134-146
• /
• 1995

Aluminium nitride(AlN) is currently under investigation as potential candidate for replacing alumium oxide(Al$_{2}$ $O_{3}$) as a substrate material for for electronic circuit packaging. Brazing of aluminium nitride(AlN) to Cu with Ag base active alloy containing Ti has been investigated in vacuum. Binary Ag$_{98}$ $Ti_{2}$(AT) and ternary At-1wt.%Al(ATA), AT-1wt.%Ni(ATN), AT-1wt.% Mn(ATM) alloys showed good wettability to AlN and led to the development of strong bond between brate alloy and AlN ceramic. The reaction between AlN and the melted brazing alloys resulted in the formation of continuous TiN layers at the AlN side iterface. This reaction layer was found to increase by increase by increasing brazing time and temperature for all filler metals. The bond strength, measured by 4-point bend test, was increased with bonding temperature and showed maximum value and then decreased with temperature. It might be concluded that optimum thickness of the reaction layer was existed for maximum bond strength. The joint brazed at 900.deg.C for 1800sec using binary AT alloy fractured at the maximum load of 35kgf which is the highest value measured in this work. The failure of this joint was initiated at the interface between AlN and TiN layer and then proceeded alternately through the interior of the reaction layer and AlN ceramic itself.