• The Transactions of the Korean Institute of Power Electronics
• /
• 제23권3호
• /
• pp.190-198
• /
• 2018

This paper proposes a nonisolated, bidirectional, soft-switching DC - DC converter with PWM plus phase shift (PPS) control. The proposed converter has an input-parallel/output-series configuration and can achieve the interleaving effect and high voltage gains, resulting in decreased voltage ratings in all related devices. The proposed converter can operate under zero-voltage switching (ZVS) conditions for all switches in continuous conduction mode. The power flow of the proposed converter can be controlled by changing the phase shift angle, and the duty is controlled to balance the voltage of four high voltage side capacitors. The PPS control device of the proposed converter is simple in structure and presents symmetrical switching patterns under a bidirectional power flow. The PPS control also ensures ZVS during charging and discharging at all loads and equalizes the voltage ratings of the output capacitors and switches. To verify the validity of the proposed converter, an experimental investigation of a 2 kW prototype is performed in both charging and discharging modes under different load conditions and a bidirectional power flow.

• Proceedings of the KSEG Conference
• /
• 대한지질공학회 2005년도 정기총회 및 학술발표회
• /
• pp.107-110
• /
• 2005

The seismological observation of Korea began in 1905, and has been run with continuous earthquake network of observation, expanding to the advanced country, but still has some problems in accuracy and speed for report. There are many problems to issue the early warning system for earthquakes and Tsunami in the East Sea because most events in the East Sea occur outside the seismic network. Therefore multi-waveform data conversion and composition from the surrounding countries such as Korea, Japan and Far East Russia are requested in order to more accurate determination of earthquake parameters. We used FESNET(Far East Seismic Network) technology to analyze 2004 May 29th Uljin Earthquake and 2005 March 20th Japanese Fukuoka Earthquake in this research, using the data of KMA, Japan stations and IRIS(4 station).

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• 제15권4호
• /
• pp.499-505
• /
• 2005

In this paper, a new type of pi+ezoelectric stepping motor is designed, manufactured and tested. This motor is composed of piezoelectric torsional actuator and a pair of one-way clutch bearings. The torsional actuator consists of 16-polygonal tube of piezoceramic that can produce an angular displacement associated with shear mode. One-way clutch bearing converts oscillation of torsional actuator into a continuous stepping rotation. The proposed stepping motor does not require any conversion mechanism for stepping motion like any other motors. In the design process, the shear resonance mode of piezoelectric actuator is analyzed by using a commercial finite element analysis program, and the performance of the fabricated torsional actuator is measured. $0.124^{\circ}$ of maximum angular displacement is measured in square wave excitation on the actuator only. The stepping motor is manufactured by assembling a pair of one-way clutch bearings and the torsional actuator. The maximum rotation speed of 72rpm and the blocking torque of 3.136 mNm are measured at 3540 Hz and 100V/mm. Once the proposed piezoelectric stepping motor is miniaturized, it can be used for many compact and precise moving applications.

• Journal of Physiology & Pathology in Korean Medicine
• /
• 제17권5호
• /
• pp.1315-1320
• /
• 2003

The purpose of this research was to investigate effects of Bambusae Caulis in Liquamen (BCL) on the synthesis of basement membrane proteins during proliferation and differentiation of 3T3-L1 cells. BCL has been used to relieve the cough and asthma, and remove phlegm in traditional oriental medicines. In recent years. it was studied for its antiinflammatory, antiallergenic. immune-modulating and anticarcinogenic capabilities. We have previously observed that glycyrrhizin stimulates the adipose conversion of 3T3-L1 cells. To investigate effects of BCL on the basement membrane proteins during proliferation and differentiation of 3T3-L1 cells, we have analyzed synthetic amounts of basement membrane components such as type IV collagen and BM40. BCL stimulated the synthesis and secretion of type IV collagen from both 3T3-L1 preadipocytes and adipocytes. The synthesis and secretion of BM40 was not affected by BCL. The continuous addition of BCL markedly stimulated cell growth and increased cell density. These results suggest an important role for type IV collagen in adipocyte differentiation.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제37권
• /
• pp.37.1-37.4
• /
• 2015

Keratocystic odontogenic tumors can occur in any area of the maxilla or mandible. According to their size, location, and relations with surrounding structures, they are treated by cyst enucleation or enucleation after either marsupialization or decompression. Enucleation is performed when cysts are not large and when only minor damage to adjacent anatomical structures is expected. Although marsupialization and decompression follow the same basic bone-regeneration principle, which is to say, by reducing the pressure within the cyst, the former leaves a large defect after healing due to the large fistula necessary to induce the conversion of the cyst-lining epithelia to oral epithelia; the latter leaves only a relatively small defect, because of the continuous washing carried out by means of a tube inserted into a small hole in the cyst. In the latter case too, a decompressor appropriate for the focal position is required, owing to the importance of maintaining the device and controlling for oral hygiene. We report herein decompression treatment with a patient-customized device for an extensive cyst in the anterior region of the mandible.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제16권3호
• /
• pp.476-481
• /
• 2012

Recently, QoS/QoE technology as a part of the HTTP-based adaptive streaming technology has attracted attention. In this paper, we find out HTTP-based adaptive and dynamic streaming technology. It is based on a dynamic adaptive streaming system over HTTP, which is designed and implemented. The system consist of conversion by the bit rate of MPEG2-TS files, division of segment, creation of MPD(Media Presentation Description) and bitrate's player through analysis of MPD File between servers and clients in network environments of dynamic and adaptive. This diverse network environments, continuous and smooth playback of video will be used in various multimedia fields.

• Journal of Electrical Engineering and Technology
• /
• 제5권3호
• /
• pp.468-476
• /
• 2010

This paper presents a direct single-stage power converter using single-phase isolated full-bridge converter modules, with inherent power factor correction (PFC) for a 12 kW switched mode power supply (SMPS). The advantages of the proposed converter are its simple control strategy, reduction in number of conversion stage, low input line current harmonics, and improvement in power factor. Analysis of the single-stage converter is carried out in continuous conduction mode of operation. Steady-state analysis of the proposed converter is conducted to obtain converter parameters. A systematic design procedure is also presented for a 12k W converter with a design example. The effect of load variation on SMPS is also studied in order to demonstrate the effectiveness of the proposed converter for the complete range of load conditions. A set of power quality indices on input ac mains for an SMPS fed from a single-stage converter is also presented for easy comparison of their performance.

• Environmental Engineering Research
• /
• 제25권4호
• /
• pp.506-514
• /
• 2020

The current study stresses on the reuse of waste lignocellulose biomass (rice husk and sugarcane bagasse) for the synthesis of carboxymethyl cellulose (CMC) and further conversion of this CMC into a biodegradable film. Addition of commercial starch was done to form biodegradable film due to its capacity to form a continuous matrix. Plasticizers such as Glycerol and citric acid were used to provide flexibility and strength to the film. Biopolymer film obtained from sugarcane bagasse CMC showed maximum tensile strength and elongation in comparison to the film synthesized from commercial CMC and CMC obtained from rice husk. It has been observed that an increase in sodium glycolate/NaCl content in CMC imposed an adverse effect on tensile strength. Opacity, moisture content, and solubility of the film increased with a rise in the degree of substitution of CMC. Therefore, CMC obtained from sugarcane bagasse was better candidate in preparing biopolymer/biocomposite film.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.321-324
• /
• 2009

Upgrading of pyrolysis wax oil has been conducted in a continuous fixed bed reactor at $450^{\circ}C$, 1hour, LHSV 3.5/h. The catalytic degradation using HZSM-5 catalyst are compared with the thermal degradation and also was studied with a function of experimental variables. The raw pyrolysis wax oil shows relatively high boiling point distribution ranging from around $300^{\circ}C$ to $550^{\circ}C$, which has considerably higher boiling point distribution than that of commercial diesel. The product characteristic from thermal degradation shows a similar trend with that of raw pyrolysis wax oil. This means the thermal degradation of pyrolysis wax oil at high degradation temperature is not sufficiently occurred. On the other hand, the catalytic degradation using HZSM-5 catalyst relative to the thermal degradation shows the high conversion of pyrolysis wax oil to light hydrocarbons. This liquid product shows high gasoline range fraction as around 90% fraction and considerably high aromatic fraction in liquid product. Also, in the catalytic degradation the experimental variable such as catalyst amount and reaction temperature was studied.

• Carbon letters
• /
• 제15권1호
• /
• pp.1-14
• /
• 2014

Carbon nanofibers (CNFs) with diameters in the submicron and nanometer range exhibit high specific surface area, hierarchically porous structure, flexibility, and super strength which allow them to be used in the electrode materials of energy storage devices, and as hybrid-type filler in carbon fiber reinforced plastics and bone tissue scaffold. Unlike catalytic synthesis and other methods, electrospinning of various polymeric precursors followed by stabilization and carbonization has become a straightforward and convenient way to fabricate continuous CNFs. This paper is a comprehensive and brief review on the latest advances made in the development of electrospun CNFs with major focus on the promising applications accomplished by appropriately regulating the microstructural, mechanical, and electrical properties of as-spun CNFs. Additionally, the article describes the various strategies to make a variety of carbon CNFs for energy conversion and storage, catalysis, sensor, adsorption/separation, and biomedical applications. It is envisioned that electrospun CNFs will be the key materials of green science and technology through close collaborations with carbon fibers and carbon nanotubes.