• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.2
• /
• pp.160-164
• /
• 2013

A laser ultrasonic inspection system is a non-contact inspection device which generates and measures ultrasonics by using laser beam. A laser ultrasonic inspection system provides a high measurement resolution because the ultrasonic signal generated by a pulse laser beam has a wide-band spectrum and the ultrasonic signal is measured from a small focused spot of a measuring laser beam. In this study, galvanic corrosion phenomenon was measured by non-destructive and non-contact method using the laser. The case of mixed foreign material on the part of corrosion was assumed and laser ultrasonic experiment was conducted. Ultrasonic was generated by pulse laser from the back side of the specimen and ultrasonic signal was acquired from the same location of the front side using continuous wave laser and Confocal Fabry-Perot Interferometer(CFPI). The characteristic of the ultrasonic signal of exist foreign material part was analyzed and the location and size of foreign material was measured.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.11
• /
• pp.1020-1026
• /
• 2015

In this paper, the design of longitudinal shunt slot array monopulse antenna in the broad wall of waveguide for Ka band millimeter-wave seeker, Dip-Brazing method for fabrication and experiment results are presented. The proposed antenna consists of radiating slots by using Elliot's array synthesis procedure, probe-exciting feed structure for improving the return loss bandwidth and monopulse comparator. Element weigthings in the array have been calculated by continuous Taylor aperture distribution. Also, the simulation tool has been used to characterize the individual isolated slot, which has subsequently been used in Elliot's method to design the slot array efficiently. The designed antenna is fabricated using Dip-Brazing method. The gain of measured antenna is 28.4 dBi. Antenna beamwidth and side lobe levels are similar to the design result we expect.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.5
• /
• pp.869-876
• /
• 2001

In modern wireless communication, it has been regarded as a important problem for the spectrum efficiency to utilize the limited frequency-resource efficiently. In addition, the system architecture has been designed for low cost, low power consumption and ultra-lightweight. In this paper, we directly modulated the BCPFSK with a superior spectrum efficiency using the DDS and applied the direct conversion to the system architecture. Finally, we designed a transceiver which has the 433 MHz BCPFSK output and evaluated the system performance. In the measured result, we know that as for spectrum and the power efficiency, BCPFSK method is better than conventional one. Also, the results of the designed system is 433.92 MHz in center frequency and about 33 dBc in carrier suppression ratio. And we get the better results in local oscillator leakage and the spurious of the ISM out-band the same as -69dBc and under 60dBc.

• Journal of Power Electronics
• /
• v.18 no.3
• /
• pp.714-722
• /
• 2018

This paper presents a wide-range speed control scheme of brushless DC (BLDC) motors based on a hall sensor with separated low- and normal-speed controllers. However, the use of the hall sensor signal is insufficient to detect motor speed in the low-speed region because of low sensor resolution and time delay. In the proposed method, a micro-stepping current control method according to the torque angle variation is presented. In this mode, the motor current frequency and rotating angle are determined by the reference speed without the actual speed fed by the hall sensor. The detected torque angle is used to adjust the current value in a limited band to control the current value in accordance with the load. The torque angle is detected exactly at the changing point of the hall sensor signal. The rotor can follow the rotating flux with the variable torque angle. In a normal speed range, the conventional vector control scheme is used to control the motor current with a PI speed controller using the hall sensor. The torque characteristics are analyzed on the basis of the back EMF and current shape. To adopt the vector control scheme, the continuous rotor position is estimated by the measured speed and hall sensor position. At the mode changing point between low and normal speed range, the proper initial current command and reference rotor position are calculated. The calculated current command can reduce the torque ripple during transient mode. The proposed method is simple but effective in extending the speed control range of a conventional BLDC motor with hall sensor without the need for a high-resolution encoder. The effectiveness of the proposed method is verified by various experiments on a practical BLDC motor.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.941-945
• /
• 2006

In the development of electricity generating wind turbines for wind farm application, only two types have survived as the methods of power regulation; stall regulation and fun span pitch control. The sound measurement procedures of IEC 61400-11 are applied to field test and evaluation of noise emission from each of 1.5 MW and 660 kW wind turbine generators (WTG) utilizing the stall regulation and the pitch control for the power regulation, respectively. Apparent sound power level, wind speed dependence and third-octave band levels are evaluated for both of WTGs. It is found that while 1.5 MW WTG using the stall control is found to emit lower sound power than 660 kW one using the pitch control at low wind speed (below 8 m/s), sound power from the former becomes greater than that of the latter in the higher wind speed. Equivalent continuous sound pressure levels (ECSPL) of the stall control type of WTG vary more widely with wind speed than those of the pitch control type of WTG These characteristics are believed to be strongly dependent on the basic difference of the airflow around the blade between the stall regulation and the pitch control types of WTG. These characteristics according to the methods of power regulation lead to the very different noise emission characteristics of WTG depending on the seasons because the average wind speed in summer is lower than the critical velocity over which the airflow on the suction side of blade in the stall types of WT are separated. These results propose that, in view of environmental noise regulation, the developer of wind farm should give enough considerations to the choice of power regulation of their WTG based on the weather conditions of potential wind farm locations.

• Journal of Powder Materials
• /
• v.23 no.2
• /
• pp.91-94
• /
• 2016

High-quality colloidal CdSe/ZnS (core/shell) is synthesized using a continuous microreactor. The particle size of the synthesized quantum dots (QDs) is a function of the precursor flow rate; as the precursor flow rate increases, the size of the QDs decreases and the band gap energy increases. The photoluminescence properties are found to depend strongly on the flow rate of the CdSe precursor owing to the change in the core size. In addition, a gradual shift in the maximum luminescent wave (${\lambda}_{max}$) to shorter wavelengths (blue shift) is found owing to the decrease in the QD size in accordance with the quantum confinement effect. The ZnS shell decreases the surface defect concentration of CdSe. It also lowers the thermal energy dissipation by increasing the concentration of recombination. Thus, a relatively high emission and quantum yield occur because of an increase in the optical energy emitted at equal concentration. In addition, the maximum quantum yield is derived for process conditions of 0.35 ml/min and is related to the optimum thickness of the shell material.

• The Journal of the Korean Society for Microbiology
• /
• v.18 no.1
• /
• pp.99-110
• /
• 1983

Four cases of pulmonary pseudallescheriasis in patients with healed pulmonary tuberculosis are described. All four patients had a long history of antituberculous chemotherapy for pulmonary tuberculosis, but continuous sputum negativity for acid fast bacilli indicated apparent recovery from tuberculosis. They, however, complained continued intermittent hemoptysis and chronic cough. Although their chest roentgenograms did not show a clearcut mycetomal shadows in preformed cavitary lung lesions, Pseudallescheria boydii or Scedosporium apiospermum was repeatedly isolated from serial sputum specimens collected at different days for a period of over half an year or two years and their serial serum specimens produced precipitin bands with home-made antigen from 8-week old culture filtrate of P. boydii. Second fungus was isolated from sputum specimens of two patients and one was Candida albicans and the other was Aspergillus fumigatus. Sera from both patients reacted with antigens of those second fungi. Unfortunately pulmonary function of three patients did not allow surgical excision of the infected area and one patient refused surgery.

• Archives of Reconstructive Microsurgery
• /
• v.16 no.2
• /
• pp.68-74
• /
• 2007

Soft-tissue reconstruction of the foot and ankle has long been a challenge for reconstructive surgeons. Limitations in the available local tissue and donor-site morbidity restrict the options. In an effort to solve these difficult problems, the authors have begun to use a subcutaneous fascial pedicled lateral supramalleolar flap. This report presents the authors' experience with five patients treated with this flap. The patients’ ages ranged from 26 to 72 years; four of the patients were male and one was female. The cause of the soft-tissue defects involved acute trauma and malignant melanom. All flaps survived and provided satisfactory coverage of the defect. Compared with the classic lateral supramalleolar flap, when the perforating branch is interrupted in its course, it is possible to elevate this subcutaneous fascial pedicled flap. The distally based flap with a compound pedicle which is continuous with a vascular axis and a band of subcutaneous fascial pedicle has long pedicle. This procedure is valuable for remote defect of the foot. It is believed that this flap is versatile and effective and is a good addition to the available techniques used by reconstructive surgeons for coverage of the foot and ankle.

• Journal of Life Science
• /
• v.8 no.1
• /
• pp.8-13
• /
• 1998

The maize mitochondrial mutant (NCS2) is derived from homologous recombination between genes encoding NADH dehydrogenase subunit 4 and subunit 6. Plants from mitochondria mutants exhibited severe related growth and development including dwarfism and striping on the leaves. Aborted embryos from NCS2 mutants have been rescued and cultured on the N6 medium supplemented with 2,4-D 1 mg/l. Most calli from NCS2 aborted embryos showed slow growing pattern at first stage. However, upon continuous culturing them on the medium, those were segregated into mutant and normal callus lines. These segregations could be detected by using PCR method with three primers. Such segregation seems to be resulted from the preferential growth of normal cells over the mutant cells on the normal culture condition. Therefore, this method can be used for determining rate of indirect cytoplasmic segregation by estimating amplified band intensities. When NCS2 mutant callus lines cultured on regeneration medium, no adventitious shoot induction was observed. However, callus lines with more mitochondria induced adventitious shoots. These studies suggest that mitochondria NADH-dehydrogenase for electron transport in the inner membrane of mitochondria is essential for the differentiation and development of plants.

• Atmosphere
• /
• v.26 no.1
• /
• pp.97-109
• /
• 2016

Heavy rainfall (over $80mm\;hr^{-1}$) system associated with unstable atmospheric conditions occurred over the Seoul metropolitan area on 27 July 2011. To investigate the heavy rainfall system, we used three-dimensional data from Korea Local Analysis and Prediction System (KLAPS) reanalysis data and analysed the structure of the precipitation system, kinematic characteristics, thermodynamic properties, and Meteorological condition. The existence of Upper-Level Jet (ULJ) and Low-Level Jet (LLJ) are accelerated the heavy rainfall. Convective cloud developed when a strong southwesterly LLJ and strong moisture convergence occurring around the time of the heavy rainfall is consistent with the results of previous studies on such continuous production. Environmental conditions included high equivalent potential temperature of over 355 K at low levels, and low equivalent potential temperature of under 330 K at middle levels, causing vertical instability. The tip of the band shaped precipitation system was made up of line-shaped convective systems (LSCSs) that caused flooding and landslides, and the LSCSs were continuously enhanced by merging between new cells and the pre-existing cell. Difference of wind direction between low and middle levels has also been considered an important factor favouring the occurrence of precipitation systems similar to LSCSs. Development of LSCs from the wind direction difference at heights of the severe precipitation occurrence area was also identified. This study can contribute to the identification of production and development mechanisms of heavy rainfall and can be used in applied research for prediction of severe weather.