• Journal of Mechanical Science and Technology
• /
• v.20 no.12
• /
• pp.2230-2241
• /
• 2006

This paper presents a sole application of boundary element method to the conjugate heat transfer problem of thermally developing laminar flow in a thick walled pipe when the fluid velocities are fully developed. Due to the coupled mechanism of heat conduction in the solid region and heat convection in the fluid region, two separate solutions in the solid and fluid regions are sought to match the solid-fluid interface continuity condition. In this method, the dual reciprocity boundary element method (DRBEM) with the axial direction marching scheme is used to solve the heat convection problem and the conventional boundary element method (BEM) of axisymmetric model is applied to solve the heat conduction problem. An iterative and numerically stable BEM solution algorithm is presented, which uses the coupled interface conditions explicitly instead of uncoupled conditions. Both the local convective heat transfer coefficient at solid-fluid interface and the local mean fluid temperature are initially guessed and updated as the unknown interface thermal conditions in the iterative solution procedure. Two examples imposing uniform temperature and heat flux boundary conditions are tested in thermally developing region and compared with analytic solutions where available. The benchmark test results are shown to be in good agreement with the analytic solutions for both examples with different boundary conditions.

• Korean Journal of Cognitive Science
• /
• v.2 no.2
• /
• pp.221-259
• /
• 1990

Four experiments explored how the size ratio of two letter patterns affects jundgment times in a same-different matching task.Size, continuity of strokes,positions of the two vowel letters were systematically varied in order to test predictions,derved from the following hypotheses:Analogue transformation,position,use of diagnostic information,and decision sriteria.Size ratio influenced only reaction times for same responses and,more importantly,changes in the length of a horizintal line in a letter affected same responses more than the other feature.Taken together,the present experiments provide support for the diagnostic information hypothesis, while casting in doubt the other hypotheses on the nature of size transformations.

• Journal of Korean Ophthalmic Optics Society
• /
• v.12 no.1
• /
• pp.41-51
• /
• 2007

Differential equations and their solutions were formulated to describe the deflection of the tapered, nonuniform thickness and width's temple, clamped at one end while the perpendicular force is acting on the other end which is freely suspended. The model was derived based on laws of continuity at every point inside the elastic medium that the deflection, tangent slope, bending moment, shearing force must be continuous within the medium. The model is found to be in good agreement with measurements on the beta titanium temple with the correlation 0.992 and p=0.999(Chi test). Therefore it is possible to predict the effect of various temple parameters such as elastic modulus, thickness, width on the deflection of the temples being considered.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.32 no.1
• /
• pp.87-102
• /
• 1990

개방식과수로는 낮은 압력으로 다량의 용수를 수송할 수 있는 장점을 갖고 있으나 유량변동에 의한 서어징현상이 현저한 것이 단점이다. 관로내의 흐름을 안정시키기 위해서는 이 서어징의 특성이 규명되어 대규모의 서어징에 대한 대책이 강구되어야 할 것이다. 개방식관수로계의 서어징을 강성수주이론으로 계산하기 위하여 운동방정식 연속방정식가 스탠드 수조의 중간벽에 설치된 언의 월유공식등을 조합한 기초방정식이 유도되었다. 본 연구의 수치해석 모델은 가장 일반적인 4차의 Runge-Kutter 방법을 사용하였으며, 이 모델의 정당성과 프로그램의 유통성을 검증하기 위하여 수리모형실험치와 수치해석치가 비교되었다. 그 결과 관로에 공기의 혼입이 없는 경우에는 실험치와 해석치가 실용상의 지장이 없는 정도로 잘 일치되었지만, 공기의 혼입이 발생되는 경우에는 실험치가 해석치에 비해 약간 크게 나타나서 이 경우에도 서러징의 해석이 가능한 새로운 모델의 개발이 필요한 것으로 생각된다. 또한 본 강성수주 모델을 이용하여 현재 서어징 문제로 곤란을 받고 있는 일본 자하연 비파호 부근의 용수간선을 대상으로 그 서어징의 특성과 개선방법을 경계한 결과 개설 개방식관수로계의 스탠드 중 매3개소 스탠드마다 1개소 스탠드의 하류측 수조 수면적 확장하는 것이 타당성이 있는 것으로 해석되었다.

• The Journal of Industrial Distribution & Business
• /
• v.10 no.12
• /
• pp.15-23
• /
• 2019

Purpose : We will develop the distribution method of wide oil extract technology to develop repellent using this technology and study mosquito repellent persistence. Research design, data and methodology : A positive control group containing purified water, ethanol and picaridin was prepared, and the experimental control group was prepared in the same proportion as the positive control group, and 0.6% of broad oil was added. The results were summarized using the calculation method according to the avoidance effect and statistically tested by t-test using the excel statistics program. Results : Experiments on skin surface area and voice control of participants showed that men had 8.9% wider skin surface area than women, and voice control tests showed that women were bitten by mosquitoes five times more than men. Both the positive and the experimental control groups had a valid duration of up to three hours, but from the time of five hours, the positive control group had 77% and the experimental control had 90%, indicating a difference of 14.4% over the positive control group. Conclusions : The mosquito repellents developed in this study on the basis of safety and continuity are cost-effective in terms of mosquito repellent, and in addition fragrance, odor removal, perfume, ink, skin care and massage effect.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.8 no.2
• /
• pp.188-197
• /
• 2016

Offshore substructures have been developed to support structures against complex offshore environments. The load at offshore substructures is dominated by waves, and deformation of waves caused by interactions with the current is an important phenomena. Wave load simulation of fixed offshore substructures in waves with the presence of uniform current was carried out by numerical wave tank technique using the commercial software, FLUENT. The continuity and Navier-Stokes equations were applied as the governing equations for incompressible fluid motion, and numerical wavemaker was employed to reproduce offshore wave environment. Convergence test against grids number was carried out to investigate grid dependency and optimized conditions for numerical wave generation were derived including investigation of the damping effect against length of the damping domain. Numerical simulation of wave and current interactions with fixed offshore substructure was carried out by computational fluid dynamics, and comparison with other experiments and simulations results was conducted.

• Journal of Veterinary Clinics
• /
• v.20 no.2
• /
• pp.229-232
• /
• 2003

Ultrasonographic examination of the stifle joint four clinically and radiographically normal adult dogs was performed before and after inducing the cranial cruciate ligament (CrCL) rupture of the bilateral stifle surgically. At Pre- or post-surgery, the hyperechoic patella ligament and the echogenic infrapatella fat interfered the visualization of the CrCL by the plain scanning method. However when the stifle joint was imaged by the scanning method injecting normal saline within the joint capsule, the hyperechogenic ligament was visualized by the separation of the infrapatella fat and the CrCL and the contrast effect of anechoic saline. When the stifle joint was imaged by the real time scanning method after the induction of the surgical rupture, fluttering of the ligament and anechoic area between the bone and the CrCL was identified due to the lack of tonicity and continuity of the ligament. Enlargement of the ligament because of its increased diameter as well as fluttering of the CrCL and the increased joint space's thickness was visualized. Consequently, confirming fluttering of the CrCL, increased ligament diameter and anechoic region between the CrCL and the bone, ultrasonographic examination is a valuable diagnostic tool as well as cranial drawer test and radiographic examination.

• Journal of Korean Academy of Nursing
• /
• v.42 no.7
• /
• pp.965-973
• /
• 2012

Purpose: The purpose of this study was to evaluate a self-care program for elders with osteoarthritis managed by primary health care workers, Community Health Practitioners (CHPs), in rural Korea. Methods: The self-care program, consisting of 7 areas, was evaluated with a randomized experimental study for patients over age 60 with osteoarthritis in which 150 participants in the experimental group and 140 in the control group were compared. The self-care program was implemented for six weeks, 2 hours per week, at community health posts by CHPs. Data were collected using an interview questionnaire given by the CHPs and laboratory tests before and after the intervention for both groups. Propensity score matching analysis was done to test effectiveness after controlling for confounding variables. Results: The intervention group showed a significant decrease in the number of painful joints (p<.001) and a significant increase in self-care ability (p<.05) compared to the control group. Conclusion: Study results indicate that training and utilizing primary health care workers in rural areas is valuable in increasing the generalization and continuity of intervention programs. As arthritis should be managed life-long, CHP directed self-care programs are useful interventions for rural elders with arthritis to learn self-care management.

• The KIPS Transactions:PartB
• /
• v.8B no.5
• /
• pp.493-500
• /
• 2001

Video scene segmentation is fundamental role for content based video analysis. In this paper, we propose a new region based video scene segmentation method using continuity test for each object region which is segmented by the watershed algorithm for all frames in video data. For this purpose, we first classify video data segments into classes that are the dynamic and static sections according to the object movement rate by comparing the spatial and shape similarity of each region. And then, try to segment each sections by grouping each sections by comparing the neighbor section sections by comparing the neighbor section similarity. Because, this method uses the region which represented on object as a similarity measure, it can segment video scenes efficiently without undesirable fault alarms by illumination and partial changes.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.9
• /
• pp.22-32
• /
• 1997

This paper proposes an imprecise compuitation model for DCT considering QOS of images and a two dimensional DCT architecture for imprecise computations. In case that many processes are scheduling in a hard real time system, the system resources are shared among them. Thus all processes can not be allocated enough system resources (such as processing power and communication bandwidth). The imprecise computtion model can be used to provide scheduling flexibility and various QOS(quality of service)levels, to enhance fault tolerance, and to ensure service continuity in rela time systems. The DCT(discrete cosine transform) is known as one of popular image data compression techniques and adopted in JPEG and MPEG algorithms since the DCT can remove the spatial redundancy of 2-D image data efficiently. Even though many commercial data compression VLSI chips include the DCST hardware, the DCT computation is still a very time-consuming process and a lot of hardware resources are required for the DCT implementation. In this paper the DCT procedure is re-analyzed to fit to imprecise computation model. The test image is simulated on teh base of this model, and the computation time and the quality of restored image are studied. The row-column algorithm is used ot fit the proposed imprecise computation DCT which supports pipeline operatiions by pixel unit, various QOS levels and low speed stroage devices. The architecture has reduced I/O bandwidth which could make its implementation feasible in VLSI. The architecture is proved using a VHDL simulator in architecture level.