• Journal of the Korean Ceramic Society
• /
• v.46 no.1
• /
• pp.35-40
• /
• 2009

Using zirconia and poly (methyl methacrylate-coethylene glycol dimethacrylate) (PMMA) microbeads, macroporous zirconia ceramics were fabricated by a simple pressing method. Effects of template size and content on microstructure, porosity, and flexural and compressive strengths were investigated in the processing of the macroporous zirconia ceramics. Three different sizes of microbeads (8, 20, and $50{\mu}m$) were used as a template for fabricating the macroporous ceramics. The porosity increased with increasing the template size at the same template content. The flexural and compressive strengths were primarily influenced by the porosity rather than the template size. However, the strengths increased with decreasing the template size at the same porosity. By controlling the template size and content, it was possible to produce macroporous zirconia ceramics with porosities ranging from 58% to 75%. Typical flexural and compressive strength values at 60% porosity were ${\sim}30\;MPa$ and ${\sim}75\;MPa$, respectively.

• Journal of the Korean Ceramic Society
• /
• v.47 no.6
• /
• pp.509-514
• /
• 2010

Porous mullite-bonded SiC (MBSC) ceramics were fabricated at temperatures ranging from 1400 to $1500^{\circ}C$ for 2 h using silicon carbide (SiC), alumina ($Al_2O_3$), strontium oxide (SrO), and poly (methyl methacrylate-coethylene glycol dimethacrylate) (PMMA) microbeads. The effect of template content on porosity, pore morphology, and flexural strength were investigated. The porosity increased with increasing the template content at the same sintering temperature. The flexural strength showed maximum after sintering at $1450^{\circ}C$/2 h for all specimens due to small pores and dense strut. By controlling the template content and sintering temperature, it was possible to produce porous MBSC ceramics with porosities ranging from 30% to 54%. A maximum flexural strength of ~51MPa was obtained at 30% porosity when no template were used and specimens sintered at $1450^{\circ}C$/2 h.

• Child Health Nursing Research
• /
• v.30 no.2
• /
• pp.142-153
• /
• 2024

Purpose: This study aimed to describe the process of developing a validated pediatric nursing simulation scenario template using the real-time Delphi method. Methods: A panel of 13 pediatric nursing experts participated in a real-time Delphi survey conducted over two rounds. Initially, 83 items were included in the questionnaire focusing on the structure and content of the simulation scenario template. Data analysis involved calculating the content validity ratio (CVR) and the coefficient of variation to assess item validity and stability. Results: Through iterative rounds of the Delphi survey, a consensus was reached among the experts, resulting in the development of a pediatric nursing simulation scenario template comprising 41 items across nine parts. The CVR values ranged from 0.85 to 1.0, indicating a high consensus among experts regarding the inclusion of all items in the template. Conclusion: This study presents a novel approach for developing a pediatric nursing simulation scenario template using real-time Delphi methods. The real-time Delphi method facilitated the development of a comprehensive and scientifically grounded pediatric nursing simulation scenario template. Our template aligns with the International Nursing Association for Clinical Simulation and Learning standards, and provides valuable guidance for educators in designing effective simulation scenarios, contributing to enhanced learning outcomes and better preparation for pediatric clinical practice. However, consideration of cultural and contextual adaptations is necessary, and further research should explore alternative consensus criteria.

• International Journal of Knowledge Content Development & Technology
• /
• v.13 no.2
• /
• pp.23-35
• /
• 2023

Word templates exist for select journals, and their primary objective is to facilitate submissions to those journals, thereby optimizing editors' and publishers' time and resources by ensuring that the desired style (e.g., of sections, references, etc.) is followed. However, if multiple unrelated authors use the exact same template, a risk exists that some text might be erroneously cloned if template-based papers are not carefully screened by authors, journal editors or proof copyeditors. Elsevier Procedia® was used as an example. Select cloned text, presumably derived from MS Word templates used for submissions to Elsevier Procedia® journals, was assessed using Science Direct. Typically, in academic publishing, identical text is screened using text similarity software during the submission process, and if detected, may be flagged as plagiarism. After searching for "heading should be left justified, bold, with the first letter capitalized", 44 Elsevier Procedia® papers were found to be positive for vestigial template text. The integrity of the information in these papers has been compromised, so these errors should be corrected with an erratum, or in the case of extensive errors and vast tracts (e.g., pages long) of template text, papers should be retracted and republished.

• ETRI Journal
• /
• v.31 no.5
• /
• pp.628-630
• /
• 2009

Recently, Ratha and others proposed a cancelable biometrics scheme which transforms an original fingerprint template into a new one using a noninvertible transformation. However, we show that the original template is recovered by a dictionary attack if two transformed templates originating from it are revealed. In our attack, we simulate the transformation and construct a set of possible pre-images for each transformed template. Then, we find the correct pre-image by computing the intersection of these sets. We present an algorithm implementing this idea as well as successful experimental results.

• International Journal of Knowledge Content Development & Technology
• /
• v.4 no.2
• /
• pp.67-95
• /
• 2014

Knowledge Management (KM) is a collaborative and integrated approach adopted at various levels to ensure that an organization's knowledge assets are best utilized to increase organizational performance. While KM has been adopted in a large number of sectors and organizations, colleges and universities, and the higher education sector in general, is yet to take full advantage of the possibilities offered by KM. Also, while past research has sought to highlight the importance of implementing KM in higher education, there is a lack of a single, clear template for KM implementation that universities leaders and administrators can adopt. The contribution of the paper is a practical, actionable, step-by-step plan, as well as a diagrammatic, theoretical framework for initiating KM successfully in colleges and universities.

• Journal of Internet Computing and Services
• /
• v.18 no.3
• /
• pp.49-61
• /
• 2017

Wikipedia infoboxes have emerged as an important structured information source on the web. To compose infobox for an article, considerable amount of manual effort is required from an author. Due to this manual involvement, infobox suffers from inconsistency, data heterogeneity, incompleteness, schema drift etc. Prior works attempted to solve those problems by generating infobox automatically based on the corresponding article text. However, there are many articles in Wikipedia that do not have enough text content to generate infobox. In this paper, we present an automated approach to generate infobox for movie domain of Wikipedia by extracting information from several sources of the web instead of relying on article text only. The proposed methodology has been developed using semantic relations of article content and available semi-structured information of the web. It processes the article text through some classification processes to identify the template from the large pool of template list. Finally, it extracts the information for the corresponding template attributes from web and thus generates infobox. Through a comprehensive experimental evaluation the proposed scheme was demonstrated as an effective and efficient approach to generate Wikipedia infobox.

• Korean Journal of Materials Research
• /
• v.28 no.3
• /
• pp.189-194
• /
• 2018

Porous graphites were synthesized by removing the template in HF after cabothermal conversion for 3 h at $900^{\circ}C$, accompanied by intercalations of pyrolyzed fuel oil (PFO) in the interlayer of Co or Ni loaded magadiite. The X-ray powder diffraction pattern of the porous graphites exhibited 00l reflections corresponding to a basal spacing of 0.7 nm. The particle morphology of the porous graphites was composed of carbon plates intergrown to form spherical nodules resembling rosettes like a magadiite template. TEM shows that the cross section of the porous graphites is composed of layers with very regular spaces. In particular, crystallization of the porous graphite was dependent on the content of Co or Ni loaded in the interlayer. The porous graphite had a surface area of $328-477m^2/g$. This indicates that metals such as Co and Ni act as catalysts that accelerate graphite formation.

• ETRI Journal
• /
• v.36 no.6
• /
• pp.1008-1015
• /
• 2014

In this paper, we present a method for reconstructing a surface mesh animation sequence from point cloud animation data. We mainly focus on the articulated body of a subject - the motion of which can be roughly described by its internal skeletal structure. The point cloud data is assumed to be captured independently without any inter-frame correspondence information. Using a template model that resembles the given subject, our basic idea for reconstructing the mesh animation is to deform the template model to fit to the point cloud (on a frame-by-frame basis) while maintaining inter-frame coherence. We first estimate the skeletal motion from the point cloud data. After applying the skeletal motion to the template surface, we refine it to fit to the point cloud data. We demonstrate the viability of the method by applying it to reconstruct a fast dancing motion.

• Journal of Digital Contents Society
• /
• v.15 no.1
• /
• pp.101-112
• /
• 2014

Existing tools using in the standard e-learning contents authoring were used a method to provide users contents template produced in advance. In order to use resources of the template in a common web-based authoring tool, there is problem to overcome. If the resource of template is inserted within the contents on the authoring tool, the deformation of the template by the user's input that may occur during the edit process cannot be controlled. In this paper, we propose an effective maintenance method to prevent deformation of the resource of template inserted into any WYSIWYG-based HTML authoring tool by user's discretion. We added a template plug-in that can create the IMS-QTI standard resource in tynyMCE the web-based open source editor of representative examples. And the plug-in for tinyMCE was realized as a module of directly respond to the action of limited user input. So, in response to the action of user's input, the structure of the template can be sustained possibly.