DOI QR코드

DOI QR Code

Does Cloned Template Text Compromise the Information Integrity of a Paper, and is it a New Form of Text Plagiarism?

  • Jaime A. Teixeira da Silva (Independent researcher)
  • Received : 2022.01.31
  • Accepted : 2022.05.24
  • Published : 2023.06.30

Abstract

Word templates exist for select journals, and their primary objective is to facilitate submissions to those journals, thereby optimizing editors' and publishers' time and resources by ensuring that the desired style (e.g., of sections, references, etc.) is followed. However, if multiple unrelated authors use the exact same template, a risk exists that some text might be erroneously cloned if template-based papers are not carefully screened by authors, journal editors or proof copyeditors. Elsevier Procedia® was used as an example. Select cloned text, presumably derived from MS Word templates used for submissions to Elsevier Procedia® journals, was assessed using Science Direct. Typically, in academic publishing, identical text is screened using text similarity software during the submission process, and if detected, may be flagged as plagiarism. After searching for "heading should be left justified, bold, with the first letter capitalized", 44 Elsevier Procedia® papers were found to be positive for vestigial template text. The integrity of the information in these papers has been compromised, so these errors should be corrected with an erratum, or in the case of extensive errors and vast tracts (e.g., pages long) of template text, papers should be retracted and republished.

Keywords

References

  1. Afolalu, S. A., Ongbali, S. O., Abioye, A. A., Oladipupo, S., Ajayi, O. O., & Salawu, E. Y. (2019). Modelling and simulation of mechanical wear of carburized cutting tool. Procedia Manufacturing, 35, 1067-1072. doi:10.1016/j.promfg.2019.06.058
  2. Ahmed, S., & Anirvan, P. (2020). The true meaning of plagiarism. Indian Journal of Rheumatology, 15(3), 155-158. doi:10.4103/injr.injr_178_20
  3. Anwar, T., Al-Jumaily, A., & Watsford, M. (2017). Estimation of torque based on EMG using ANFIS. Procedia Computer Science, 105, 197-202. doi:10.1016/j.procs.2017.01.209
  4. Ataei, A., Bradford, M. A., & Valipour, H. (2016). Sustainable design of deconstructable steel-concrete composite structures. Procedia Engineering, 145, 1153-1160. doi:10.1016/j.proeng.2016.04.149
  5. Balamane-Zizi, O., & Ait-Amara, H. (2012). Study of the simultaneous elimination of phosphates and heavy metals contained in dairy wastewater by a physical-chemical and biological mixed process; Consequences on the biodegradability. Energy Procedia, 18, 1341-1360. doi:10.1016/j.egypro.2012.05.151
  6. Bielska, B., & Rutkowski, M. (2021). There must be someone's name under every bit of text, even if it is unimportant or incorrect: Plagiarism as a learning strategy. Journal of Academic Ethics, 1-20. doi:10.1007/s10805-021-09419-z
  7. Boltuc, P. (2020). Consciousness for AGI. Procedia Computer Science, 169, 365-372. doi:10.1016/j.procs.2020.02.231
  8. Buayai, K., Chinnabutr, K., Intarawong, P., & Kerdchuen, K. (2014). Alied MATPOWER for power system optimization research. Energy Procedia, 56, 505-509. doi:10.1016/j.egypro.2014.07.185
  9. Butenkov, S., Krivsha, V., & Krivsha, N. (2019). The analytical aroach to the parameterized fuzzy operators design. Procedia Computer Science, 150, 193-200. doi:10.1016/j.procs.2019.02.038
  10. Canadian Research & Development Center of Sciences and Cultures. (2012). Advances in Petroleum Exploration and Development. CSCanada. http://flr-journal.org/index.php/aped/article/viewFile/2854/3018
  11. CIRP CMS. (2021). Paper Preparation and Submission Guidelines. http://cirp-cms2021.org/paper-guidelines
  12. Colasante, A., Ceccacci, S., Talipu, A., & Mengoni, M. (2019). A fuzzy knowledge-based system for diagnosing unpredictable failures in CNC machine tools. Procedia Manufacturing, 38, 1634-1641. doi:10.1016/j.promfg.2020.01.121
  13. DeWitt, D., Alias, N., Ibrahim, Z., Shing, N-K., & Rashid, S. M. M. (2015). Design of a learning module for the deaf in a higher education institution using padlet. Procedia - Social and Behavioral Sciences, 176, 220-226. doi:10.1016/j.sbspro.2015.01.464
  14. Dougherty, M. V. (2020). Disguised Academic Plagiarism: A Typology and Case Studies for Researchers and Editors. Research Ethics Forum Volume 8, Springer Nature, Cham, Switzerland, 170 pp. doi:10.1007/978-3-030-46711-1
  15. ELSEVIER. (2021). Procedia CIRP. ELSEVIER. https://www.journals.elsevier.com/procedia-cirp
  16. ELSEVIER. (2021). Procedia®. ELSEVIER. https://www.elsevier.com/books-and-journals/procedia
  17. Feng, X-D. (2017). Design and implementation of remote health monitoring system for 3D visual bridge. Procedia Engineering, 174, 1330-1335. doi:10.1016/j.proeng.2017.01.282
  18. Florek, R., Simancik, F., Harnuskova, J., Orovcik, L., Dvorak, T., Nosko, M., & Tekel, T. (2014). Injection molded plastics with aluminum foam core. Procedia Materials Science, 4, 323-327. doi:10.1016/j.mspro.2014.07.566
  19. Friman, H. (2017). New trends in the higher education: Renewable energy at the faculty of electrical engineering. Energy Procedia, 115, 18-28. doi:10.1016/j.egypro.2017.05.003
  20. Gangadharaa, M., Reddappa, H. N., RaviKumar, M., & Suresh, R. (2018). Mechanical and wear characterization of Al6061 red mud composites. Materials Today: Proceedings, 5(10), 22384-22389. doi:10.1016/j.matpr.2018.06.606
  21. Gao, Q., Liu, Q., & Guo, Z-N. (2017). Design of DC regulated power suly based on earth wire. Procedia Engineering, 174, 1393-1399. doi:10.1016/j.proeng.2017.01.297
  22. Garcia Laborda, J. (2015). The Spanish language testee profile: issues in standardized language testing. Procedia - Social and Behavioral Sciences, 190, 545-549. doi:10.1016/j.sbspro.2015.05.041
  23. Gavora, P., Jakesova, J., Kalenda, J. (2015). The Czech validation of the self-regulation questionnaire. Procedia - Social and Behavioral Sciences, 171, 222-230. doi:10.1016/j.sbspro.2015.01.113
  24. Grillo, I. B., Einloft, S., & Seferin, M. (2017). Multivariate statistical evaluation of ionic liquids features for CO2 capture. Energy Procedia, 114, 86-94. doi:10.1016/j.egypro.2017.03.1151
  25. Guo, D-H., Wang, Q-L., Han, X-J., Luo, Z-R., & Zhang L-S. (2017). Clinical study on computerized molecular imaging tracing stem cell transplantation for patients with myocardial infarction. Procedia Engineering, 174, 1380-1386. doi:10.1016/j.proeng.2017.01.293
  26. Huang, J. (2017). Design of real time monitoring system for dangerous goods transportation based on DSP. Procedia Engineering, 174, 1323-1329. doi:10.1016/j.proeng.2017.01.280
  27. Huang, S., Liu, F., Zeng, Q. C., Hu, F., Zhu, J., & Wang, Z. (2015). Numerical analysis of air distribution of sprout production base in Shenyang region. Procedia Engineering, 121, 1449-1453. doi:10.1016/j.proeng.2015.09.058
  28. Hsu, T-H., Wang, L-C., & Chu, P-C. (2018). Development of a cloud-based advanced planning and scheduling system. Procedia Manufacturing, 17, 427-434. doi:10.1016/j.promfg.2018.10.066
  29. Jiao, Y., Duan, Z., Guo, Y-Y., Ji, D-H., Li, X-Y., Peng, Y-M., Qin, Q., Qiu, J., Tian, S-K., Wang, J-Q., Wang, N., Wei, Y-Y., Yu, C-H., & Xu, G. (2016). Progress in the design and related studies on the high energy photon source. Physics Procedia, 84, 40-46. doi:10.1016/j.phpro.2016.11.008
  30. Juklova, K., Prusova, J. (2016). The Czech teacher pregradual practical training system from the perspective of the educators. Procedia - Social and Behavioral Sciences, 217, 2-8. doi:10.1016/j.sbspro.2016.02.004
  31. KeAi. (2021). Guide for Authors. KeAi. https://www.keaipublishing.com/en/journals/solid-state-electronics-letters/guide-for-authors/
  32. Kuo, F. O., Yu, P. T., & Hsiao, W. H. (2013). Develop and Evaluate the Effects of Multimodal Presentation System on Elementary ESL Students. Turkish Online Journal of Educational Technology-TOJET, 12(4), 29-40. doi:10.1016/j.sbspro.2015.01.465
  33. Lei, Y., Tan, H. W., & Li, Y. (2018). Technical-economic evaluation of ground source heat pump for office buildings in China. Energy Procedia, 152, 1069-1078. doi:10.1016/j.egypro.2018.09.123
  34. Loren, L. P., & Reese, R. A. (2019). Proving infringement: Burdens of proof in copyright infringement litigation. Lewis & Clark Law Review, 23(2), 621-680. https://heinonline.org/HOL/LandingPage?handle=hein.journals/lewclr23&div=18&id=&page=
  35. Mahdi, H. S., Azra, P., & Azam, A. (2018). Microstructural and optical properties of Ni doped CdS nanoparticles synthesized by sol gel route. Materials Today: Proceedings, 5(9), 20636-20640. doi:10.1016/j.matpr.2018.06.445
  36. Ma, X. (2017). Research and implementation of computer data security management system. Procedia Engineering, 174, 1371-1379. doi:10.1016/j.proeng.2017.01.290
  37. MDPI (2021). Instructions for Authors. MDPI. https://www.mdpi.com/journal/publications/instructions
  38. Moura, N. C. B. (2017). The Jaguare Creek revitalization project: Transforming Sao Paulo through a green stormwater infrastructure. Procedia Engineering, 198, 894-906. doi:10.1016/j.proeng.2017.07.165
  39. NCBI. (2021). Plagiarism. https://www.ncbi.nlm.nih.gov/mesh/?term=plagiarism.
  40. Pagliuca, M. M., & Scarpato, D. (2014). The olive oil sector: A comparison between consumers and "experts" choices by the sensory analysis. Procedia Economics and Finance, 17, 221-230. https://www.sciencedirect.com/science/article/pii/S2212567114008971 https://doi.org/10.1016/S2212-5671(14)00897-1
  41. Pai, B. J., & Shenoy, K. N. (2015). Land use land cover pattern in the vicinity of Mannapalla Lake, Manipal. Aquatic Procedia, 4, 1405-1412. doi:10.1016/j.aqpro.2015.02.182
  42. Paresashvili, N. (2014). Major tasks of ecotourism management in Georgia. Procedia - Social and Behavioral Sciences, 156, 170-173. doi:10.1016/j.sbspro.2014.11.164
  43. Pehoiu, C., & Moaca, M. (2015). Coaches' and athletes' perception concerning the causes of accidents in combat sports. Procedia - Social and Behavioral Sciences, 180, 1304-1310. doi:10.1016/j.sbspro.2015.02.268
  44. Pekkarinen, J. (2015). Scanning optics enabled possibilities and challenges in laser cladding. Physics Procedia, 78, 285-295. doi:10.1016/j.phpro.2015.11.039
  45. Pieper, D., Ge, L., & Abou-Setta, A. (2021). Is reusing text from a protocol in the completed systematic review acceptable?. Systematic Reviews, 10(1), 1-4. doi:10.1186/s13643-021-01675-9
  46. Plagiarism Detector. (2021). Plagiarism Checker. https://plagiarismdetector.net/
  47. Pranckute, R. (2021). Web of Science (WoS) and Scopus: The titans of bibliographic information in today's academic world. Publications, 9(1), 12. doi:10.3390/publications9010012
  48. Raza, M. A., Zandvliet, H. J. W., Poelsema, B., & Kooij, E. S. (2015). Colloidal route to bio-inspired hierarchical superhydrophobic substrates. Materials Today: Proceedings, 2(10), 5450-5454. doi:10.1016/j.matpr.2015.11.068
  49. Remeikiene, R., Startiene, G., & Stundziene, A. (2014). The identification of the impact of bidirectional self-employment factors on self-employment start-up and duration: Latvian case. Procedia - Social and Behavioral Sciences, 156, 268-273. doi:10.1016/j.sbspro.2014.11.187
  50. Reynoso, M. L. S., & Divan, M. (2019). Improving the real-time searching in the organizational memory. Procedia Computer Science, 154, 293-304. doi:10.1016/j.procs.2019.06.043
  51. Scientific Data. (2021). Submission guidelines. Scientific Data. https://www.nature.com/sdata/publish/submission-guidelines#sec-3
  52. Shunxiang, H., Feng, L., Qingcun, Z., Fei, H., & Zifa, W. (2015). Modeling and optimal control of atmospheric pollution hazard in nuclear and chemical disasters. Procedia IUTAM, 17, 79-90. doi:10.1016/j.piutam.2015.06.012
  53. Song, Z., Liu, W., & Wang, L. (2015). Chemical mechanical polishing slurry for amorphous Ge2Sb2Te5. Procedia Engineering, 102, 582-589. doi:10.1016/j.proeng.2015.01.131
  54. Sorkin, A., Tan, J.L., & Wong, C.H. (2017). Multi-material modelling for selective laser melting. Procedia Engineering, 216, 51-57. doi:10.1016/j.proeng.2018.02.088
  55. Springer Nature. (2021). Templates and style files for journal article preparation. https://support.springer.com/en/support/solutions/articles/6000081241-templates-and-style-files-for-journal-article-preparation.
  56. Teixeira da Silva, J. A. (2016). An error is an error... is an erratum. The ethics of not correcting errors in the science literature. Publishing Research Quarterly, 32(3), 220-226. doi:10.1007/s12109-016-9469-0
  57. Teixeira da Silva, J. A. (2020). Simplify manuscript submission and optimize authors' resources by eliminating formatting and cover letters. European Science Editing, 46, e52063. doi:10.3897/ese.2020.e52063
  58. Teixeira da Silva, J. A., & Vuong, Q. H. (2021). Do legitimate publishers benefit or profit from error, misconduct or fraud?. Exchanges: The Interdisciplinary Research Journal, 8(3), 55-68. doi:10.31273/eirj.v8i3.785
  59. Teixeira da Silva, J. A. (2022). A synthesis of the formats for correcting erroneous and fraudulent academic literature, and associated challenges. Journal for General Philosophy of Science, (in press) doi:10.1007/s10838-022-09607-4
  60. Typeset. (2021). Procedia Manufacturing - Template for authors. https://typeset.io/formats/elsevier/procedia-manufacturing/45b441a74048e50848e326092b2a4a11
  61. Uluc, T. F. (2013). Comparing the language skills and grammatical competences of German language teacher trainees. Procedia - Social and Behavioral Sciences, 70, 1740-1747. doi:10.1016/j.sbspro.2013.01.249
  62. Vinogradov, S. V., Zhuravlev, V. M., & Fundaev, S. V. (2015). Estimation of the spectral composition of the signal by the antenna composed of multiple satellites. Procedia Engineering, 104, 15-22. doi:10.1016/j.proeng.2015.04.091
  63. Wang, M., Liu, W., Chen, X., Xu, X., & Ma, Y. (2020). Machining performance study in Radial Ultrasonic-Assisted Rolling Electrochemical Micromachining. Procedia CIRP, 95, 793-797. doi:10.1016/j.procir.2020.02.304
  64. Wang, R. (2017). Research on data security technology based on cloud storage. Procedia Engineering, 174, 1340-1355. doi:10.1016/j.proeng.2017.01.286
  65. Wu, X., Pei, W., Deng, W., Kong, L., & Ye, H. (2018). Collaborative optimal distribution strategy of AGC with participation of ESS and controllable load. Energy Procedia, 145, 103-108. doi:10.1016/j.egypro.2018.04.017
  66. Xiao, X., & Zheng, X. (2019). A dynamic network resource demand predicting algorithm based on incremental design of RBF. Procedia Computer Science, 147, 29-35. doi:10.1016/j.procs.2019.01.180
  67. Yan, M., Li, M., He, H., & Peng, J. (2018). Deep learning for vehicle speed prediction. Energy Procedia, 152, 618-623. doi:10.1016/j.egypro.2018.09.220
  68. Yu, J., & Yang, I. (2017). The cloud technology double live data center information system research and design based on disaster recovery platform. Procedia Engineering, 174, 1356-1370. doi:10.1016/j.proeng.2017.01.289
  69. Zeilmann, R. P., Ivaninski, T., & Webber, C. (2018). Surface integrity of AISI H13 under different pulse time and depths by EDM process. Procedia CIRP, 71, 472-477. doi:10.1016/j.procir.2018.05.031