• Journal of Food Hygiene and Safety
• /
• v.27 no.4
• /
• pp.420-426
• /
• 2012

The purpose of this study was to identify control points through microbiological hazard analysis in the manufacturing processes of starch noodles. Samples were collected from the ingredients, manufacturing processes, equipment and environment. Microbiological hazard assessments were performed using aerobic plate counts (APC), Enterobacteriaceae (EB), E. coli and five pathogens including B. cereus, E. coli O157:H7, L. monocytogenes, Salmonella spp., and S. aureus. The APC levels in raw materials were from 2.12 to 3.83 log CFU/g. The contamination levels after kneading were 4.31 log CFU/g for APCs and 2.88 log CFU/g for EB counts. APCs decreased to 1.63 log CFU/g and EB were not detected after gelatinization, but their levels slightly increased upon cooling, cutting, ripening, freezing, thawing, and separating. The reuse of cooling and coating water would be a critical source of microbial increase after cooling. After drying, APCs and EB counts decreased to 5.05 log CFU/g and 2.74 log CFU/g, respectively, and the levels were maintained to final products. These results suggest that the cooling process is a critical control point for microbiological safety, and the cooling water should be treated and controlled to prevent cross contamination by pre-requisite program.

• Journal of Radiation Industry
• /
• v.9 no.2
• /
• pp.85-90
• /
• 2015

Purpose: Time of operation has been reduced and accuracy of operation has been improved since C-arm, which offer real-time image of patient, was introduced in operation room. However, because of the contamination of patient, C-arm could not be used more appropriately. Therefore, this study is to know factors of controlling exposure dose, image quality and the exposed dose of health professional in operation room. Materials and methods: Height of Wilson frame (bed for operation) was fixed at 130 cm. Then, Model 76-2 Phantom, which was set by assembling manual of Fluke Company, was set on the bed. Head/Spine Fluoroscopy AEC mode was set for exposure condition. According to detector size of C-arm, the absorbed dose per min was measured in the 7 steps OFD (cm) from 10 cm to 40 cm (10, 15, 20, 25, 30, 35, 40 cm). In each step of OFD, the absorbed dose per min of same diameter of collimation was measured. Moreover, using Nero MAX Model 8000, exposure dose per min was measured according to 3 step of distance from detector (20 cm, 60 cm, 100 cm). Finally, resolution was measured by CDRH Disc Phantom and magnification of each OFD was measured by aluminum stick bar. Result: According to detector size of C-arm, difference of absorbed dose shows that the dose of 20 cm OFD is 1.750 times higher than the dose of 40 cm OFD. It means that the C-arm, which has smaller size of detector, shows the bigger difference of absorbed dose per min (p<0.05). In the difference of absorbed dose in the same step of OFD (from 20 cm to 40 cm), the absorbed dose of 9 inch detect or C-arm was 1.370 times higher than 12 inch' s (p<0.05). When OFD was set to 20 cm OFD, the absorbed dose of non-collimation case was approximately 0.816 times lower than the absorbed dose of collimation cases (p<0.05). When the distance was 20 cm from detector, exposed does includes first-ray and scatter-ray. When the distance was 60 cm and 100 cm from detector, exposed does includes just scatter-ray. So, there was the 2.200 times difference of absorbed does. Finally, when OFD was increased, spatial resolution was 4 to 5 step was increased. However, low contrast resolution was not relative. Moreover, there was 1.363 times difference of magnification (p<0.05). Conclusion: When C-Arm is used, avoiding contamination of patient is more important factor than reducing exposed dose of health professional in operation room. Just controlling exposure time is just way to reduce the exposed does of workers. However, in the case, non-probability influence could be occurred. Therefore, this study proved that the exposed dose will be reduced if the factors such as using small detector size of C-arm, setting OFD from 20 cm to 25 cm and non-collimating. Moreover, dose management of C-arm in the non-interesting area will be considered additionally.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.5
• /
• pp.721-734
• /
• 2022

This study analyzed the spatio-temporal variation characteristics of major environmental factors such as primary productivity (PP), chlorophyll a, nutrients, sinking particle matters, and organic contamination and biochemical composition of surface sediment on a monthly basis for approximately 2 years around shellfish mariculture in Jaran Bay, Korea. In addition, PP in Jaran Bay was compared with that in other coastal areas and related policy plans were proposed. The average PP of the study area was high in summer and autumn with 6.43~115.43 mgC m^-2 hr^-1 range. This was lower than that in Gamak Bay and Masan Bay, whereas higher than that in Garorim Bay and the West Sea. The PP in coastal waters, where many aquaculture farms were distributed, significantly fluctuated. The different size compositions of phytoplanktons constituting chlorophyll a slightly varied by month, and little restriction existed on the productivity of phytoplanktons owing to the depletion of nutrients. Typically, the Redfield ratio was less than 16, indicating that nitrogen was the limiting factor for the growth of phytoplanktons. The biochemical composition of particulate organic matters in the water column showed the highest carbohydrates, but lipids and protein contents were high in surface sediments. The concentration of TOC and AVS of the surface sediments was high at inside of bay, and sometimes, exceeded the environmental criteria of fishing grounds. The organic C:N ratio of sediments ranged from 8.1 to 10.4 on average. PP had the highest correlation with chlorophyll a, nitrogen and protein of particle organic materials. Recently, chlorophyll a, DIN, and DIP of water column trends tended to decrease, however, the contamination of sediments increased. Considering the annual PP of 125.9 gC m^-2 yr^-1 and mariculture area (oyster) of 4.97 km², the annual carbon production from phytoplanktons was estimated to be about 625 tons, and the annual total wet weight of shellfish (oyster) was estimated to be about 6,250 tons.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.2
• /
• pp.252-260
• /
• 2009

Whereas the numbers of childcare centers and kindergartens are increasing rapidly, systematic management to control the food safety of foodservice operation is not yet well established. Samples from 12 centers in Seoul and Gyeonggi Province were collected to assess the microbiological quality of 32 raw materials, 24 cooked foods, 76 food-contact surfaces (knives, cutting boards, dish towels and gloves), 17 employees' hands and 12 air-borne bacteria. The microbiological analyses were performed for aerobic plate counts (APC), Enterobacteriaceae, E. coli and 7 pathogens (B. cereus, C. jejuni, C. perfringens, L. monocytogenes, Salmonella spp., S. aureus, and V. parahaemolyticus). Among raw materials, E. coli ($1.39{\sim}2.08\;\log\;CFU/g$) were detected in 4 out of 6 meats and 7.46 log CFU/g of APC in tofu. High enterobacteriaceae levels of 4.23, 5.14 and 4.19 log CFU/g were found in cucumber salad, steamed spinach with seasonings and steamed bean sprout with seasonings, respectively. No pathogens were found in all samples except for C. perfringens detected from raw spinach and raw lotus root. Only APC and enterobacteriaceae were found in food-contact surfaces. Two of the 23 knives and three of the 24 kitchen boards showed over 500 CFU/$100\;cm^2$ of APC; also, APC levels (5.03 to 5.44 log CFU/g) were detected in 4 of the 12 dish towels. Only one glove showed Enterobacteriaceae (2.44 log CFU/glove) contamination. Enterobacteriaceae were found in 2 employees' hands ($2.37{\sim}4.44\;\log\;CFU$/hand) among the 16 employees. The contamination levels of air-borne bacteria were shown unacceptable in two (2.25 and 2.30 log CFU/petri-film/15 min) out of the 12 kitchen areas. These results suggest that the microbiological hazards in some foods and environments are not well controlled and thus a guideline should be provided to ensure the food safety in childcare center and kindergarten foodservice operations.

• Economic and Environmental Geology
• /
• v.40 no.2 s.183
• /
• pp.209-221
• /
• 2007

Numerical analysis was performed to investigate the effect of heavy metal contamination on neighboring environment in case a dam is constructed by using rockfill materials contaminated by heavy metals. The numerical simulation carried out in this research includes both subsurface flow and contaminant transport in the inside of the CFRD(Concrete Faced Rockfill Dam), using two commercial programs, SEEP2D and FEMWATER. The three representative cases of scenarios were chosen to consider a variety of cases occurring in a dam site; (1) Scenario 1 : no crack in the concrete face slab, (2) Scenario 2 : a crack In the upper part of face slab, and (3) Scenario 3 : a crack between plinth and face slab in the lower part of face slab. As a result of seepage analysis, the amount of seepage in scenario 2 was calculated as $14.31\sim14.924m^3/day$ per unit width, corresponding to the 1,000 times higher value than that in other scenarios. Also, in the simulation of contaminant transport by using FEMWATER, specified contaminant concentration of 13 ppb in main rockfill zone was set to consider continuous leakage from the rock materials. Through the analysis of contaminant transport, we found that elapsed times to take for the contaminant concentration of about 2 ppb to arrive at the end of a dam are as follows. Scenario 1 has the elapsed time of 55,000 years. In Scenario 2. it is 50 years. Finally, scenario 3 has 27,000 years. The rapid transport of the contaminant in scenario 2 was attributed to greater seepage flow by 500 times than other scenarios. Although, in case of upper crack in the face slab, it was identified that the contaminant might transport to the end of a dam within 100 years with about 2 ppb concentration, however, it happened that the contaminant was hardly transported out of the dam in other scenarios, which correspond to either no crack or a crack between plinth and face slab. In conclusion, the numerical analysis showed that the alternative usage of the contaminated sand and gravel as the dam embankment material can be one of the feasible methods with the assumption that the cracks in a face slab could be controlled adequately.

• Journal of Mushroom
• /
• v.16 no.3
• /
• pp.147-154
• /
• 2018

This study was aimed to improve the productivity and income of mushroom farming by developing a new casing material as a substitute for clay loam casing soil, which is becoming more difficult to acquire. When the new casing materials were used for the stable production of button mushroom (Agaricus bisporus), a 1:1 mixture of clay loam and button mushroom media obtained after harvest supported 13% greater mycelial growth ($32.0kg/3.3m^2$). This material was better than clay loam soil in preventing contamination with environmental compounds and pests. The use of an inexpensive 1:1 mixture of peat moss and coco peat resulted superior mycelial growth with 4% better yield ($32.9kg/3.3m^2$) compared with conventional clay loam soil. Advantages of these casing materials included ready availability and improved productivity. Mixtures of peat moss + coco peat + zeolite (50%:30%:20%) and coco peat + coal ash (75%:25%) could substitute for conventional casing soil. Additionally, the novel mixtures containing material obtained after cultivation might be used to produce organic fertilizer.

• Korean Journal of Environment and Ecology
• /
• v.36 no.6
• /
• pp.566-574
• /
• 2022

Heavy metals are one of the dangerous pollutants that threaten urban biodiversity due to their accumulation over a long period without being decomposed in vivo. Accordingly, there is a need for biological monitoring to compare accumulation concentrations in living organisms according to the degree of heavy metal exposure to evaluate heavy metal contamination in the air in urban areas. This study aims to examine the possibility of using nesting materials as heavy metal monitoring samples and determine the effects of heavy metals on Paridae. We installed 54 artificial nest boxes in the research areas that included campus green spaces (14), urban forests (11), and urban parks (29) on a university campus in Cheonan City, Chungcheongnam Province. The birds' use rate of artificial nest boxes was 11/14 (78.57%) in campus green spaces, 8/11 (72.72%) in urban forests, and 6/29 (20.68%) in urban parks. Moss materials were collected from collected nests, and the heavy metal accumulation characteristics of each type of urban green space and the effects of heavy metals on the success of fledging of Paridae were compared through heavy metal analysis. The analysis showed that the average concentrations of zinc and lead were 228.08±209.62 ㎍/dry g and 17.67 ± 6.72 ㎍/dry g, respectively. There was no significant difference in zinc concentration for each type of urban green space (Kruskal-Wallis test, p-value=0.28), but lead concentration showed a significant difference (Kruskal-Wallis test, p<0.05^*). Of the 21 Paridae, nests analyzed for heavy metals, fledging of birds was observed in 11 nests (52.38%). Fledging of birds observed in each urban green space type was 7 campus green spaces (77.78%), 6 in urban forests (85.71%), and 1 in urban park (20%), mainly in urban forests and green spaces on campus. Heavy metal concentrations were compared to check the effect of heavy metal accumulation on the successful fledging of Paridae, but there was no statistically significant difference (Zn: W=44, p-value=0.74, Pb: t=0.64676, df =7.2422, p-value=0.54). This study is a basic study using the nesting materials of Paridae as heavy metal monitoring samples, and it is determined that it can be used as basic data for non-invasive biological monitoring.

• Korean Journal of Environmental Agriculture
• /
• v.32 no.4
• /
• pp.273-278
• /
• 2013

BACKGROUND: Total petroleum hydrocarbons (TPH), which are main materials of soil contamination by oil, are a term used for any mixture of hydrocarbons. Korea Ministry of Environment established the maximum permissible level of TPH in farmland by 500 mg/kg, and reported that the TPH level of soil in 266 installation such as gas station, transport company, and military unit ranged from 1,356 to 55,117 mg/kg and were much higher than the maximum permissible level in 2011. METHODS AND RESULTS: To determine the effect of TPH on crops, we investigated the effect of gasoline, kerosene, and diesel on the germination and radicle growth of mainly consumed crops. The germination rates of control in investigated all crops ranged from 80.0-100%. The germination and radicle growth in majority of investigated crops were not inhibited even at 2,500 mg/L. However, germination in onion, leek, and green perilla and radicle growth in leek, rape, tomato, and green perilla were significantly inhibited by increasing concentrations of gasoline, kerosene and diesel treatment. Germination and radicle growth inhibition of green perilla by kerosene and diesel were the highest, the percent inhibition at the 500 mg/L were 100 and 98.6%, 100 and 88.2%, respectively. 50% inhibition of germination in green perilla by kerosene and diesel were 39.96 and 29.87 mg/L, and 50% inhibition of radicle growth were 52.76 and 177.96 mg/L, respectively. Conclusion(s): These results suggest the possibility that the maximum permissible level of TPH might to be established general level with exception by crops.

• Clean Technology
• /
• v.25 no.4
• /
• pp.289-295
• /
• 2019

Though the usage of vinyls and plastics produced from fossil fuels has been increasing in the world, the eco-friendly domestic disposal or recycling of waste vinyls has to be executed because the migration or importation of waste vinyls or waste plastics are globally prohibited. Even though the eco-friendly domestic disposal or recycling of waste vinyls and waste plastics should be developed, promising eco-friendly recycling methods are few because there are extraneous substances in waste vinyls and waste plastics. Also, conventional incineration and landfill methods result in secondary contamination and then increase disposal costs. Therefore, the selective elimination of extraneous substances or other materials included in waste vinyls and waste plastics could make valuable recycling or reuse possible. In particular, the novel hybrid process in which crushing and screening are simultaneously conducted in a rotary kiln type reactor can domestically maximize the material recycling or reuse. In this study, the feasibility study for a crushing/screening hybrid process developed in Korea was performed and evaluated in case of thermal recycling (TR) and material recycling (MR). The effect of various subsidies on economic efficiency was especially evaluated by means of domestic recycling plans. The incentive revenues from waste vinyl recycling and the incineration share of waste vinyls affected the net present values and internal rate of returns of the hybrid process.

• Journal of Korean Academy of Nursing
• /
• v.31 no.1
• /
• pp.81-93
• /
• 2001

The purpose of this study was to develop a continuing nursing care program for cancer patients and the caregivers staying at their home and to test its effects on patients' symptom distress, caregiver burden, and satisfaction of life. The continuing nursing care program was based on the homecare needs of cancer patients, and was provided by three clinical nurses who took care of the patients while they were hospitalized. The program consisted of discharge education about selfcare using education materials(book and handout) and provisions of direct care. These were counselling and education during which visiting patients' home one week after discharge and telephone counseling two weeks after discharge. Counseling by telephone was always available during the research period. A quasi-experimental research design was used to test the effects of the program. Subjects for this study were 53 cancer patients discharged from the hospital and caregivers. These subjects were assigned to an experimental group (n=23) receiving continuous nursing care, or to a control group (n=30) not receiving continuous nursing care. Data from control group was collected first to protect from contamination. Data collection was done from October of 1998 to February of 2000. The collected data was analysed using mean, t-test, and chi-square test computed by SPSS software. The summary of results was as follows: 1) The symptom distress was a little decreased at posttest, but there were no significant differences between the experimental and the control group in symptom distress. 2) The score of caregiver burden was significantly decreased in experimental group at posttest, but no differences in control group. 3) There were no significant differences between the experimental and control group in the satisfaction of life. 4) The score of satisfaction of continuing nursing care program in experimental group at posttest was 2.321 of 3. In conclusion, even though this study did not obtain evidence of effectiveness of continuing nursing care program on patients, such as. It is still expected to be effective by a more improved program. Therefore we want to give some suggestions for further studies. 1) It is needed to make a communication channel with the patient's doctor to response promptly and appropriately to patient's conditions. 2) The research is necessary on patients in terminal stage or early stage of cancer diagnosis who have many nursing needs. 3) It is needed to readjust the roles and job assignment of clinical nurse to implement effectively as a program provider.