• 산업공학
• /
• 제16권1호
• /
• pp.34-43
• /
• 2003

The Korean government has been working to reduce national logistics costs since the early 1990s. One of the major plans instituted by the government was to build five complex freight terminals using ICDs(inland container depots) as hub inland terminals. This paper explains the process and the methods adopted for site selection, with special focus on the Youngnam Freight Terminal. Among nineteen developable sites in Youngnam region, four candidates were selected based on the Map Overlay Approach under several criteria, including land acquisition costs, proximity to major highways and railroads, suitability of the terrain, etc. In this study, we used the AHP to select the best site among the four sites.

• 한국해양공학회지
• /
• 제10권1호
• /
• pp.100-107
• /
• 1996

In this paper, we report the results of the experimental study on the flow and the mass transport around a square harbor driven by a tidal effect. The model harbor is composed of a uniform water-depth with a straight breakwater. The harbor is connected to the outer ocean by an entrance region having the same shape as the harbor. We investigated two cases, one having another breakwater in the place between the entrance region and the outer ocean, and the other without it, The surface and bottom flow patterns of the model container are visualized by using light particles and dye, respectively. It was shown that the inner harbor and the entrance region have well-organized, large vortical residual flows, and the material transport between the entrance and outer region is however significantly different for two cases; when the breakwater is built between the two regions, the transport is far better than that without it, which is clearly contrary to our common sense that the breakwater would block the dispersion of the materials between the harbor and the outer ocean.

• 설비공학논문집
• /
• 제14권9호
• /
• pp.725-733
• /
• 2002

In this study, the heat transport limitations of a two-phase closed thermosyphon were investigated. For the test, a two-phase closed thermosyphon ($L_t/: 600 mm,\;L_e:105mm,\;L_a:75mm,\;L_c:420mm,\;D_o:22.2mm,$ container: copper (inner grooved surface), working fluid: PFC ($C_6F_14$) was fabricated with a reservoir that can change the fill charge ratio. The following was imposed as the factors on the heat transport limitations of a two-phase closed thermosyphon. 1) Fill charge ratio of the working fluid. 2) Tilt angle of the longitudinal axis. From tile experimental data, some results were obtained as follows. When the fill charge ratio was relatively small ($\psi$20%), the heat transport limitation occurred about 100W by dry-out limitation. However over 40%, it shelved nearly constant value (500 W) by flooding limitation. The heat transport limitation according to the tilt angle increased smoothly until the tilt angle was $60^{\circ}$,/TEX>, after then decreased slowly.

• 한국포장학회지
• /
• 제15권1호
• /
• pp.17-23
• /
• 2009

한국에서 미국으로의 단감의 수출확대를 위하여 미국에서의 단감 생산 및 유통 현황을 현지 방문하여 조사하였다. 그리고 해상을 통한 단감 포장의 시범적 수송과 현지 판매를 수행하여 유통 중의 문제점을 파악하였다. 이러한 조사로부터 고품질 상태로의 단감을 미국에 수출하기 위한 방안을 도출하고자 하였다. 미국 현지에서의 단감 산업은 생산량 증가로 가격이 하락하고 있으며 이에 따른 수지 악화로 재배면적 및 생산량이 감소 추세에 진입하였다. 단감 소비는 현재 아시안에 의하여 주도적으로 이루어지고 있지만 최근 히스패닉과 백인들에 의한 소비도 증가하고 있었다. 타국으로부터 수출되는 감에 비해 한국산 단감은 색도와 당도를 증진시키는 노력이 필요하며 지나치게 대과인 경우는 국내 가격이 높아 가격 경쟁력이 떨어지고 수출확대가 어려운 것으로 나타났다. 대미 수출 단감 포장은 수송 중 저온 컨테이너 별로 온도차가 심하게 발생되었고 온도차가 많은 컨테이너의 과실은 흑변, 연화 등의 발생으로 품질이 크게 저하되었다. 과실의 플라스틱 봉지를 결속하는 상태가 불량하여 포장내 공기조성이 단감저장에 적절한 수준으로 형성되지 않았고(산소농도가 높고 이산화탄소농도가 낮음), 과피흑변 및 흑점, 연화과 등 생리장해과의 발생이 많았다.

• 한국항해항만학회지
• /
• 제48권1호
• /
• pp.27-33
• /
• 2024

코로나 팬데믹 이후 컨테이너 터미널 내 혼잡도 증가에 따라 반출입 차량 작업 대기 및 체류시간이 급증하여 반출입 작업 비효율이 극심한 실정이다. 이에 항만 당국은 반출입예약시스템(Vehicle Booking System; VBS)을 구축하여 시범운영 중에 있으나 이해관계자 간 정보공유 문제 및 컨테이너 운송 주체의 미온적 참여 등으로 인해 개선효과가 뚜렷하지 않다. 따라서 본 연구에서는 반출입 차량의 작업 대기 및 체류시간 문제의 해결을 위한 기초자료로써, 딥러닝 기반의 반출입 차량 체류시간 예측 모형을 제시하였다. 실제 컨테이너 터미널의 반출입 운영 데이터를 통해 제시한 예측 모형을 실험하고 실제 데이터와 비교하여 예측 정확도를 검증한 결과 제시한 예측 모형이 높은 예측 정확도를 보이는 것을 확인하였다.

• 한국항해항만학회지
• /
• 제48권1호
• /
• pp.62-77
• /
• 2024

해상운송 산업에서는 공급과 수요의 불균형이 지속적으로 증가하면서 세계 주요 해운선사들이 해운 시황에 따른 선복량을 탄력적으로 조절하기 위해 블랭크 세일링을 주요 수단으로 사용하고 있다. 일반적으로 블랭크 세일링은 중국의 춘절 기간에 맞추어 많이 실시되어 왔지만, 2020년부터 시작된 글로벌 팬데믹과 미국·중국 간 무역 전쟁 등과 같은 특수한 상황으로 인해 최근 해운선사들은 기존 대비 큰 규모의 블랭크 세일링을 실시하였다. 이러한 블랭크 세일링은 화물 운송 지연에 직접적 영향을 미치기 때문에 기업과 소비자의 측면에서 부정적인 영향을 초래할 수 있다. 따라서 본 연구는 이에 선제적으로 대응하기 위해 포아송 회귀모형과 음이항 회귀모형을 활용하여 해상운임 결정요인이 해운선사의 블랭크 세일링에 미치는 영향력을 분석하였다. 분석 결과, 포아송 회귀분석의 2M의 경우 유의한 변수로 글로벌 컨테이너 해상물동량, 컨테이너 선복량, 컨테이너선 해체량, 컨테이너선 신조선가지수, OECD 인플레이션을 도출하였고, 음이항 회귀분석의 Ocean Alliance의 경우 글로벌 컨테이너 해상물동량과 컨테이너선 발주량을, THE Alliance의 경우 컨테이너선 선복량과 금리를, Non-Alliance의 경우 국제유가, 글로벌 공급망 압력지수, 컨테이너선 선복량, OECD 인플레이션을, Total Alliance의 경우 컨테이너선 선복량과 금리를 유의한 변수로 도출할 수 있었다.

• 한국포장학회지
• /
• 제22권3호
• /
• pp.107-117
• /
• 2016

In order to reduce packaging and logistics costs for any business, it is important to identify opportunities for improvement throughout an entire logistics system including measurement of the performance and cost of packaging. Although the importance of packaging in a supply chain has been recognized by many scholars and experts, the total cost and value of packaging have not been successfully estimated. This paper reviews the recent researches and articles that tried to quantify the value of packaging focusing on the business decision between reusable and expendable shipping container systems. Three key factors such as cost, ownership, and standardization are identified and discussed in terms of impact on supply chain costs and performances. It is important to understand that the decision of a package system can change a logistics activities and even entire logistical system. Hence, the total cost and value of transport packaging should be calculated with understanding of interactions with logistical activities throughout supply chain. Identifying the opportunities and constraints of packaging changes on total logistics cost and activities must be carefully examined before implementation of a packaging system.

• 제어로봇시스템학회논문지
• /
• 제22권6호
• /
• pp.445-452
• /
• 2016

This paper discusses the dynamics and control problem of an overhead shuttle system (OSS), which is a critical part of the automated container terminal at a port. The main purpose of the OSS is efficient automated transport function of containers, which also requires high precision and safety. A major difference between the OSS and the conventional container crane is the configuration of the cables for hoisting the spreader. A mathematical model of the OSS is developed here for the first time, which results in an eight-pole system. Also, open loop control methods (trapezoidal and notch-type velocity profiles) are investigated so that the command input to the overhead shuttle produces the minimum possible sway of the payload. Simulation results show that the vibration suppression capability of the OSS is superior to the conventional overhead container crane, which is partially due to the cable configuration.

• 한국군사과학기술학회지
• /
• 제24권6호
• /
• pp.569-576
• /
• 2021

Radar is a ground defense system that detects enemy aircraft and receives power from a mobile power supply in an emergency. Serious problems may occur if the equipment is damaged by impact during transportation for use. The US military standard MIL-STD-810H contains information on environmental tests such as shock and vibration applied to munitions. Therefore, in this study, the transient analysis of ANSYS 19.2 was performed using the impact data specified in MIL-STD-810H as an input value. Through this, the maximum stress generated in the impact environment of the mobile power supply container was derived, and the safety margin was calculated to confirm the reliability of the container.

• 대한산업공학회지
• /
• 제23권2호
• /
• pp.275-288
• /
• 1997

The container transportation problem is a kind of generalized pickup and delivery problem(GPDP), and a typical NP-hard problem of which polynomial algorithm has not yet been developed. In this problem, trucks have to transport containers from origins to destinations, while have to satisfy several restrictions such as request time, cargo closing time, driver's break time. In this paper, we present a straightforward heuristic and a user-interactive truck dispatching system which supports decision makers.