• 대한조선학회논문집
• /
• 제43권2호
• /
• pp.236-245
• /
• 2006

The ventilation performance for the various venting duct arrays has been experimentally compared in the scaled model of the container hold. Most container ships have the ventilation duct system to remove effectively the condensing heat released from container refrigerator. The existing duct system is vertically installed and basically has the number of duct as many as the columns of reefer container stack. In this study, to make up for the weak points having stagnantly hot legions in the centered area of container hold for the present system, the horizontal upward jotting duct system was proposed and proved by temperature rising tests on the scaled model. In this paper, the expected flow regimes and the thermal and hydrodynamic analogies as well as the measured temperature distributions in a hold for various duct types and heat released rates are deeply discussed.

• Journal of Advanced Marine Engineering and Technology
• /
• 제27권6호
• /
• pp.759-766
• /
• 2003

The amount of container freight continuously has been increased. and the low efficiency of container crane causes jamming frequently in transportation and cargo handling at port. The conventional control techniques based on a mathematical model are not well suited for dealing with ill-defined and uncertain systems. Recently. Fuzzy control has been successfully applied to a wide variety of practical problems as robots. automatic train operation system. etc. In this paper. a fuzzy controller for container crane is proposed to accomplish a design of improved control system for minimizing the swing motion at destination. In this scheme a mathematical model for the system is obtained in state space form. Finally. to exhibit the tracking performance and robustness of the proposed controller. computer simulations were carried out with various references, parameter variations and disturbances.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.933-939
• /
• 2001

A Satellite shipping container must afford the satellite a relatively benign thermal, vibration, and particle environment that is oblivious to the extreme temperatures, sand, dust, vibrations and shocks that can accompany the transportation. In this study, we have designed a vibration isolation system of a spacecraft container that will be used to transport a satellite called KOMPSAT (KOrea Multi-Purpose SATellite) -2 from KARI (Korea Aerospace Research Institute) Taejon to its launch site. To identify the dynamic characteristics of the system, a 1/3-scaled mockup of the container was developed. A large electro-magnetic shaker (Max. 240 KN) was used to excite the mockup, and vibration signals from 20 points were collected for modal tests. Numerical simulations through CATIA 3D Modeling were performed to identify the behavior of isolation springs. The results showed that a simplified model predicts the behavior in a reasonable accuracy. Moreover, the model guides us how to design a full-scaled satellite-shipping container.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2009년도 추계학술대회
• /
• pp.185-186
• /
• 2009

컨테이너 화물의 물동량이 증가함에 따라 공컨테이너의 처리 요구량도 함께 증가하여 왔으며 이에 따른 공컨테이너의 재배치 문제에 관한 연구가 꾸준히 이루어져 왔다. 하지만 컨테이너화물의 처리가 공컨테이너의 처리와 함께 이루어지지는 않는다. 더욱이 우리나라 같이 ICD(Inland Container Depot)와 ODCY(Off-Dock Container Yard) 와 같은 내륙 거점이 많은 환경에서는 그 거점에서 필요로 하는 공컨테이너의 수요에 따른 재배치 연구가 필요하나 이와 같은 연구는 많이 이루어지지는 않았다. 이 논문에서는 컨테이너 터미널과 ICD, ODCY와 같은 거점에서 필요로 하는 공컨테이너의 수요량에 따른 합리적인 재배치 모형을 수립하고 분석하도록 한다. 또한 과거와 동일하게 시행되고 있는 현재의 재배치 방식을 개선하여 비용 절감 효과를 높이는데 도움이 되도록 한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.151-157
• /
• 2004

In this paper, we propose a simple control scheme, based on second order sliding modes, which guarantees a fast and precise container transfer and the swing suppression during the container movement, despite of model uncertainties and unmodeled dynamic actuators. In the actual case, the swing suppression is obtained by constraining the system motion on a suitable surface which involves both the desired path and the swing angle. Strictly speaking, the trolley velocity is modified on-line, on the actual swing angle, to obtain the suppression of the oscillations not only at the end of the transport but during transfer as well. Such controller has been tested on a laboratory-size model of the 3Dcrane, and some experimental results are reported.

• 한국항해항만학회지
• /
• 제46권5호
• /
• pp.449-457
• /
• 2022

The Port of Busan is currently ranked as the seventh largest container port worldwide in terms of cargo throughput. However, port competition in the Far-East region is fierce. The growth rate of container throughput handled by the port of Busan has recently slowed down. In this study, we analyzed how economic conditions and multiple external shocks could influence cargo throughput and identified potential implications for port business. The aim of this study was to build a model to accurately forecast port throughput using the ARIMA model, which could incorporate external socio-economic shocks, and the VEC model considering causal variables having long-term effects on transshipment cargo. Findings of this study suggest that there are three main areas affecting container throughput in the port of Busan, namely the Russia-Ukraine war, the increased competition for transshipment cargo of Chinese ports, and the weaker growth rate of the Korean economy. Based on the forecast, in order for the Port of the Port of Busan to continue to grow as a logistics hub in Northeast-Asia, policy intervention is necessary to diversify the demand for transshipment cargo and maximize benefits of planned infrastructural investments.

• 한국항만경제학회지
• /
• 제18권1호
• /
• pp.3-26
• /
• 2002

The purpose of this paper is to Investigate the productive efficiency and competitive strength of world container ports using the DEA, Super-efficiency, and FDH methods with the raw data from previous research by Jun et al.(1993). The super-efficiency measure examines the maximal radial change In input, outputs for an observation to remain efficient. Therefore, it provides a means of distinguishing between efficient observations, which would otherwise seem identical. FDH provides a good test mechanism for examining the practical implications of the choice available among alternative efficiency measures and orientations, because of the lack of convexity of its production possibility set. Both methods are complementary to DEA. This paper follows the traditional productivity analysis method overcoming the limitation of previous studies by using the DEA, FDH and Super-efficiency methods, and proposing in measure the relative competitive strength of worldwide container ports. The main empirical results of this paper are as follows: Firstly the ports of Singapore, Hongkong, Kilrung, Busan, Tokyo. and Longbeach were found to be efficient In the CCR model. The ports of Felixstowe, Bangkok, Singapore, Hongkong, Kilung, Busan, Tokyo, and Longbeach were found to be efficient in the BCC model. Secondly, super. efficiency rankings under CRS and input-oriented model are as follows: Longbeach, Keelung, Singapore, Busan, Tokyo, and Honkong. However, it was difficult In differenciate the rankings under the VRS and input-oriented model. due to major difficulties posed by the ports of Singapore, Hongkong, and Longbeach. Thirdly, the FDH method shows that the inefficient ports are Bremerhaven, Antwerp, Le Havre, Kobe, Seattle, New York The policy Implications of this study are as follows: Firstly, when port authorities want to measure the international competitive strength of container ports and enhance their productive efficiency, they should consider the traditional method as well as introducing the Super-efficiency and FDH methods. Secondly, according to the analysis results of the super-efficiency and FDH methods, poll authorities should recommend benchmarks ports and dominated ports as reference ports in order to enhance the productive efficiency of their container ports that have an efficiency rating of less than 1. Efficient ports whose efficiency ratings are over 1 in the Input-oriented Super-efficiency model should also consider the usage of input and output elements used by more efficient ports.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2006년도 추계 학술대회
• /
• pp.315-320
• /
• 2006

Container crane in container terminal have a lot of parts, and a crane breakdown affects the productivity of terminal. In this paper, we decide Preventive Maintenance (PM) schedules for container crane in container terminals. We define structure of container crane using three model. Also we develop a simulation system and genetic algorithm for decision PM schedules based on failure and maintenance data collected from container terminal. We compare the work schedule with PM schedules of container crane, then regulate PM schedules using heuristic method.

• 한국경영과학회지
• /
• 제30권3호
• /
• pp.67-80
• /
• 2005

This paper deals with a container terminal where containers are discharged by quay cranes from a ship and transported by a fleet of vehicles to the terminal yard. Since container terminals are fully utilized in general, It is important to increase terminal throughput by discharging the containers out of the ship without any delay, At the operational level, it should be decided which vehicle transports which container. The vehicle dispatching decision should be carefully made since the container discharging time increases when the quay cranes wait idle for the vehicles. This paper presents vehicle dispatching heuristics with the objective of minimizing the total container discharging time. The heuristics are based on a network flow model and a look-ahead concept. Through some experiments, the performance of the dispatching methods is evaluated.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(I)
• /
• pp.608-613
• /
• 2002

This study was under taken as an analysis of failure mode in a railroad bed reconstructed with miniaturized Geotextile Container after being destroyed by heavy rain. It assesses the practical use of the bag shaped Geotextile Container method in the rehabilitation of destroyed roadbeds. The failure mode was assessed using the laboratory model tests to determine the following criteria: Strain of Geotextile Container, Vertical ＆ Horizontal displacements of Geotextile Container layer, and the transmitting load effects due to the applied load. The Geotextile Container layer was failed as a Block Failure type, although there was some variation in the results between the saturated and unsaturated conditions. The main failure was caused by the reduction of the interface friction between Geotextile Containers. The result of this mobilizes the significant horizontal displacement and the ultimate failure of the Geotextile Container layer. The strain on the wet Geotextile Container was occurred about two times greater than that of dry condition.