• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.20 no.4
• /
• pp.236-240
• /
• 2010

This study demonstrates the use of a chemical containing potassium superoxide (KO2) to convert carbon dioxide (CO$_2$) in air to oxygen (O$_2$). A oxygen generating closed-circuit SCBA (self contained breathing apparatus) removes carbon dioxide by a chemical reaction with potassium dioxide that consumes the carbon dioxide and produces oxygen. Considering the disasters, there is a need to develop strategies to enable the introduction of self-contained self rescuers (SCSR). The potassium superoxide reacts with the wears breath to produce oxygen and absorb carbon dioxide. If the respiration rate of a person is 5 MET (metabolic equivalent), to say 30 L/min, at disaster such as fire, mass of potassium superoxide was evaluated as 33.3 g with yield and safety factor. Four researchers tested on a laboratory treadmill breathing through SCSRs in a closed circuit, it appears useable for 9 minutes.

• Asian-Australasian Journal of Animal Sciences
• /
• v.5 no.3
• /
• pp.549-558
• /
• 1992

The study on the potential use of pigeon pea (PP) as a ruminant feed was carried out with sheep in 3 experiments. Digestibility of dry pigeon pea leaves (PPL) and pigeon pea seeds (PPS) determined by differential and regression methods respectively, with rice straw (RS) as a basal diet, revealed that PPS contained higher nutritive value and palatability than PPL. On dry matter (DM) basis, PPL and PPS contained 19.8 and 20.0% CP, 7.3 and 2.3% EE, 6.0 and 4.4% ash, 61.1 and 51.7% NDF, and 29.4 and 17.5% ADF, respectively. The trypsin inhibitor activity in the seed was 3 times of that in the leaves (19.5 vs 7.0 mg TIA/g DM). The digestibility of PPL and PPS were 50.2 and 72.2% in DM, 52.7 and 73.3% in OM, 51.0 and 65.1% in CP respectively. DM intake as well as the digestibility of most nutrients increased with the increasing level of PPS. Digestible energy (DE), Total digestible nutrient (TDN) and N-balance of sheep fed solely PPS, estimated by regression method, was 3.2 kcal/g, 71.1% and 6.3 g/d respectively. Pigeon pea seeds can be well used to substitute soybean meal in concentrate rations for ruminants or directly supplemented to low quality roughages.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.354-357
• /
• 2004

According to the computerization of railway signaling systems, the interface link between the signaling systems has been replaced by the digital communication channel. At the same time, the importance of the communication link is more pronounced than in the past. In this paper, new network-based protocol for Korean railway signaling has designed between CTC and SCADA system, and the overview of designed protocol is briefly represented. Using the informal method for specifying the communication protocol, a little ambiguity may be contained in the protocol. To clear the ambiguity contained in the designed protocol, we use LTS model to design the protocol for this interface link between CTC and SCADA, the LTS is an intermediate model for encoding the operational behavior of processes. And then, we verify automatically and formally the safety and the liveness properties through the model checking method. Especially, the modal ${\mu}$-calculus, which is a highly expressive method of temporal logic that has been applied to the model checking method. It will be expected to increase the safety, reliability and efficiency of maintenance of the signaling systems by using the designed protocol for railway signaling in Korea.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.7 no.2
• /
• pp.171-180
• /
• 1997

The objectives of this study were both 10 discuss the sampling method for airborne metalworking fluids(MWF)' mist and 10 suggest measures to minimize worker's exposure to carcinogen contained in metalworking fluids. In order to measure airborne MWF mist, it seems to be appropriate to use NIOSH Method #0500(filler weight) rather than NIOSH Method # 5026(analysis by FTIR). Because MWF mist on PVC filter evaporated and migrated during sampling, worker's exposure to MWF could be underestimated. So, when evaluating worker's exposure to MWF mist, other environmental conditions also must be considered. Enclosure and local exhaust ventilation system seems to he the most effective measure and must be constructed with process facility. In order to control worker exposure to carcinogens contained in MWF, distillation type and condition for crude oil, PAH concentration in MWF, and viscosity index of MWF must legally be described.

• Asian-Australasian Journal of Animal Sciences
• /
• v.6 no.2
• /
• pp.253-258
• /
• 1993

The study on the nutritive value and the potential use of two kinds (local vs. import) of sesame meal (SSM) in layer diets as substitute for soybean meal (SBM) at 25, 50, and 75% was carried out. Three hundred and thirty six layers were kept individually on a battery cage and fed isonitrogenous diets, 16% crude protein (CP), for 252 days. The local and the imported SSM contained on air dry basis 35.7 and 36.3% CP, 24.7 and 9.1% ether extract (EE), respectively. Their amino acid contents are all lower than those reported by NRC (1984). The local material contained remarkably lower lysine (0.44 vs. 0.94), methionine + cystine (1.06 vs. 1.75) and threonine (0.52 vs. 1.22) than the imported meal. Imported SSM could be substituted for SBM as high as 50% in layer ration without statistically adverse effect on egg production, feed intake, body weight gain, average egg weight and egg size, while local SSM was inferior to the control in all aspects. However, when production performance of the groups fed either kind of SSM was compared, no significant difference was found at the two lower substitution levels.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.12
• /
• pp.1-6
• /
• 2019

Aluminum liners used in cylinders are hazardous for human health. In this study, we use a plastic PA liner inside cylinders to solve this problem. Plastic PA liners are widely used in the manufacturing industry in the production of food and beverage containers. We covered the aluminum boss with a plastic liner material and wound the composite fibers over the liner material. To reinforce the dome area, we used low strength / high elongation plastic liner. To predict the performance of the developed product, we conducted structural analyses utilizing the 3D laminated solid element. We verified the soundness of the product by testing the prototype.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.12 no.2
• /
• pp.91-96
• /
• 2006

The widespread use of packaging materials on food packages sometimes causes off-flavor and deterioration in the food by migration of packaging materials which consist of mainly plastic materials and printing ink solvents. Even though migration of the residual packaging materials does not generally cause safety problems in the contained food, it certainly can generate off-flavor and finally deteriorate quality of the finished product. In highly consumer-oriented markets, quality of the finished product is gaining more importance economically, so profound and thorough study about migration into food to maintain the fine quality of the end product becomes an importance issue. Studies have been conducted about migration of various packaging materials and the chemical reactions between the food components and the materials used for food packaging (Brody, 1989; Mcneal and Breder, 1987; Lawson, G and Lawson, C, 1996). Several of these studies have measured partition coefficient values (Kp) between packaging materials and various food samples and involved finding factors that affected the partitioning behavior of packaging materials into the contained food. However, to enable prediction of partitioning, data are still needed on the relation of packaging material chemical structure and properties to partitioning behavior, and on the partitioning behavior of various food ingredients and the total food compositions.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.55 no.3
• /
• pp.200-206
• /
• 2010

Banaba, Lagerstroemia speciosa (L.) Pers. (Lythraceae) is a tree that grows in the tropic islands of the Pacific. This plants are used for medical purposes in the world. The components of L. speciosa were analyzed for the contents according to growing stages at leaves. The distributions of the corosolic acid ($2{\alpha}$, $3{\beta}$-dihydroxyurs-12-en-28-oic acid), phytol, campestrol, and vitamin E were rich among samples in this study. These were contained much fatty acids. The mean content of palmitic acid was from 2.4% across all growing stages, varying from 2.15% for young leaves with the lowest content and 2.86% for fallen leaves with the highest content. Oleic acid, linoleic acid, and linolenic acid were contained nearly mean 2.0% in all leaves of banaba. Our results have shown that the phytochemical profile of young L. speciosa leaves differs quite radically from that of old L. speciosa leaves. In addition, these subdividing results according to plant growth should allow future researches to conduct targeted experimental studies and use of particular medical components of interest, examining chemical variation on the inter-developmental levels.

• Restorative Dentistry and Endodontics
• /
• v.18 no.2
• /
• pp.423-430
• /
• 1993

The purpose of this study was to investigate the effect of ferric and ferric ions contained in phosphoric acid solution as a pretreatment solution on bonding of MMA/TBBO resin to dentin. Each of 1 % and 3 % ferric chloride. cupric chloride. cupric sulfate. and cupric nitrate was mixed into 10% phosphoric acid solution and pretreated dentin surface of bovine anterior teeth for 30 seconds followed- by water rinse and dry. Tensile bond strength was determined after bonding of pretreated dentin with MMA/TBBO resin by use of brush-on ;technique and storing for 24 hours in 3it distilled water. The amount of cupric ions adsorbed on pretreated dentin surface was detected by Wave-Dispersion X-ray microanalyzer for different groups of each pretreatment solution containing cupric salts. The pretreatment with cupric ions contained in 10% phosphoric acid solution was effective to increase bonding strength of MMA/TBBO resin to dentin but not in case of ferric ions. The pretreatment with 3 % cupric chloride and cupric nitrate both enhanced significant increase in bonding strength compared to the control group of 10% phosphoric acid solution(p<0.05). Cupric ions measured in pretreated dentin surface was higher in 3 % cupric chloride group than in 1% cupric chloride group, but couldn't find distinct relationship from the results of this experiment between the amount of adsorbed cupric ions according to the kind of cupric salts and the bonding strength value.

• Journal of Electrical Engineering and Technology
• /
• v.1 no.4
• /
• pp.513-519
• /
• 2006

As a very important part in development of the protocol, verifications for developed protocol specification are complementary techniques that are used to increase the level of confidence in the system functions by their specifications. Using the informal method for specifying the protocol, some ambiguity may be contained therein. This indwelling ambiguity in control systems can cause the occurrence of accidents, especially in the case of safety-critical systems. To clear the vagueness contained in the designed protocol, we use the LTS (Labeled Transition System) model to design the protocol for railway signaling. And then, we verify the safety and the liveness properties formally through the model checking method. The modal ${\mu}$-calculus, which is an expressive method of temporal logic, has been applied to the model checking method. We verify the safety and liveness properties of Korean standard protocol for railway signaling systems. To perform automatic verification of the safety and liveness properties of the designed protocol, a communication verification tool is implemented. The developed tools are implemented by C++ language under Windows XP. It is expected to increase the safety and reliability of communication protocol for signaling systems by using the developed communication verification tool.