• Applied Biological Chemistry
• /
• v.46 no.3
• /
• pp.257-261
• /
• 2003

Chemical components relevant to the characteristic antimicrobial activities of the Korean chestnut (Castanea crenata S. et Z.) leaves and flowers were analyzed. The composition of free sugar were sucrose, maltose in the chestnut flowers and sucrose, glucose, fructose in the chestnut leaves. The contains of tannin were 0.16% in the chestnut flower and 1.98% in the chestnut leaves. In fatty acids case, the linoleic contents were significantly high in the chestnut leaves and flowers. The organic acids showed high composition to succnic and citric acid in the chestnut leaves. The ammo acid compositions showed high contents to aspatic acid, proline, glutamic acid, glycine and methionine in the chestnut leaves and flowers. The total amino acid showed significantly higher in the chestnut leaves than flowers. The major minerals contained in the chestnut leaves and flowers were K, Ca, Ng, Fe, Mn and Al. Ascorbic acids were detected highly in the chestnut leaves and flowers.

• Journal of the Korean Wood Science and Technology
• /
• v.28 no.3
• /
• pp.62-69
• /
• 2000

The bark of ash(Fraxinus rhynchophylla) and elm(Ulmus davidiana var. japonica) trees were collected, extracted with acetone-$H_2O$(7:3, v/v), fractionated with hexane, chloroform and ethylacetate, and freeze dried to give some dark brown powder. Each fraction of the powder was chromatographed on a Sephadex LH-20 column using a series of aqueous methanol and ethanol-hexane mixture as eluents. The ash bark contained a large amount of coumarin derivatives such as aesculetin and aesculin in addition to trace amount of ligstroside and oleuropein. Most of the elm bark extractive were (+)-catechin and its glycosides such as (+)-catechin-7-O-xylopyranose and (+)-catechin-7-O-apiofuranose in addition to a small amount of procyanidin B-3, a dimeric (+)-catechin. NMR and FAB-MS spectrometric analyses were performed to characterize the structures of isolated phenolic compounds.

• Genomics & Informatics
• /
• v.7 no.2
• /
• pp.65-84
• /
• 2009

Sequences from the clones of full-length enriched cDNA libraries serve as valuable resources for functional genomics related studies, genome annotation and SNP discovery. We analyzed 7,392 high-quality chromatograms (Phred value ${\geq}$30) obtained from sequencing the 5' ends of clones derived from full-length enriched cDNA libraries of Korean native pigs including brainstem, liver, cerebellum, neocortex and spleen libraries. In addition, 50,000 EST sequence trace files obtained from GenBank were combined with our sequences to identify cSNPs in silico. The process generated 11,324 contigs, of which 2,895 contigs contained at least one SNP and among them 610 contigs had a minimum of one sequence from Korean native pigs. Of 610 contigs, we randomly selected 262 contigs and performed in silico analysis for the identification of cSNPs. From the results, we identified 1,531 putative coding single nucleotide polymorphisms (cSNPs) and the SNP detection frequency was one SNP per 465 bp. A large-scale sequencing result of clones from full-length enriched cDNA libraries and identified cSNPs will serve as a useful resource to functional genomics related projects such as a pig HapMap project in the near future.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.23 no.1
• /
• pp.78-89
• /
• 1994

To evaluate of quality of Yakju brewed with different types of fermenters(Nuruk) and brewed by a method described in Sallymkyungjae, blucoamylase and protease and protease activities of Nuruk were measured, and proximate composition , coloring degree, acetaldehyde , alcohol , , fusel oils , amino acid content , mineral content and sugar composition of Yakju samples were also determined. It was foung that the lower the pH, the lower the glucoamylase acitvity in Nuruk samples A to E . In A, B, D and H, protease activity washigher at ph 5.5 than at pH 5.0 . Yakju sampels 1 to 5 during fermentation , total acidity and amino acid content were high at the first step and were getting lower gradually at the second step. In Yakju samples 6 to 11 , ethanol content was high in 6b, 7b, 8a, 8b and 11b. At the second step, residual sugar content was getting higher gradually in 7 a, 11 a and 11b. The coloring degree of Yakju wasinfluenced by not only color of Nuruk but also Fe content in Yakju . Of the Yakju examined , only 9a and 9b contained acetaldehyde in trace amounts. Thanol content was the highest in 8a and 8b. Fusel oil content was high in 8a and 8b. In samples 6 to 9 , aspartic acid content was higher in treatment a than treatment a than treatment b, but tyrosine , histidine and proline contents were higher in treatment a than treatment b. The levels of frucose, melibiose, sorbitol, and arabinose in Yakju brewed from unsteamed rice were higher than in Yakju brewed from steamed rice. K content was the lowest in 9a and 9b. Na content was higher in treatment a than in treatment a than in treatment b. In only 6a, Ca/P ratio was more than one.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.11a
• /
• pp.42-42
• /
• 2011

To evaluate the Hwangsu spring as natural mordants effect on dyeing. The natural mordants effect of Hwangsu spring were analyzed by pH, temperature, trace elements, organic matter and color fastness. Hwangsu spring having pH 2.42 and $14.4^{\circ}C$ was harvested at the end of September, in Yeongcheon (Gyeongbuk Province, Korea) and left on a $0^{\circ}C$ and $25^{\circ}C$ before use. Hwangsu spring during storage at $25^{\circ}C$ turned brown by photochemical reaction. The Result of ICP analysis, it contained Fe(414.9 ppm), Al(88.9 ppm), Mn(4.9 ppm) and observed character by water analysis. Dyeing and post-mordant procedure; Cotton(KS K 0905) were dyed with clove powder for 30 min at $70^{\circ}C$. Hwangsu spring, Aluminium Sulfate $14-18H_20(Al_2(SO_4)_3{\cdot}14-18H_2O)$, Iron Sulfate Heptahydrate($FeSO_4{\cdot}7H_2O$) were used by post mordant at the same ratio. The dyed fabrics were treated with 20% each mordant solution at $25^{\circ}C$ for 10min. Comparison with a reproduced chemical mordant, the K/S values of cotton fabrics dyed with Hwangsu sping were increased.

• Resources Recycling
• /
• v.10 no.4
• /
• pp.34-41
• /
• 2001

A research was performed to evaluate a use of shredder residue to currently dispose of at landfills. Laboratory analyses were conducted to determine especially the fuel characteristics of shredder residue. For this aim, shredder residue was classified by the particle size as well as by the type of material and the content of Cl, S, ash, and calorific value were determined. Due to the chlorinated plastic content of shredder residue, mean concentration of Cl was found to exceed 4wt% except one sample while that of S was ranged from 0.25 to 0.39 wt%. As far as calorific value was concemed, plastic was observed to be more than 10,000 kcal/kg while wood/paper and fiber accounted for approximately 4,000 kcal/kg. Shredder residue was found to contain varying trace amounts of metal elements, including Fe of 6∼8.5 wt%. Hg and Cr(VI) were not detected, however, while Cd was contained as small as 0.0004-0.0009 wt%.

• Korean Journal of Agricultural Science
• /
• v.46 no.1
• /
• pp.33-44
• /
• 2019

This study was conducted to examine the components of phytoncide from a pine forest in the southern temperate zone. Recent studies have found that a large amount of phytoncide is released not only from cypress trees but also from pine trees. Because the amount released is the highest during summer, we selected a warm climate region in the southern temperate zone and measured the concentration in the month of August. To capture the phytoncide from the forest atmosphere, we used the adsorption tube method with a mini pump and successfully gathered 9 L of forest air at a flow rate of 150 mL/min. We performed duplicate sampling from two different tubes installed at the same location and derived the mean value. A gas chromatography/mass spectrometer detector with thermal desorption spectroscopy was utilized to perform quantitative and qualitative analyses of the captured material. The results showed that the average phytoncide particle of the pine forest in the southern temperate zone contained a number of components as follows in descending order: ${\alpha}$-Pinene (39%, $0.28ng/m^3$), followed by ${\beta}$-Pinene (16%, $0.11ng/m^3$), D-Limonene (8%, $0.06ng/m^3$), camphor (6%, $0.04ng/m^3$), camphene (6%, $0.04ng/m^3$), and p-Cymene (5%, $0.04ng/m^3$). There were also 13 additional phytoncide components in trace amounts. The results of this study are expected to provide a useful dataset for building a "Healing-forest".

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.14 no.2
• /
• pp.69-79
• /
• 2009

Major and trace elements were analyzed in three core sediments to investigate geochemical characteristics of East Sea sediments and provenance changes during late Quaternary in Ulleung Basin. Comparing with Yellow and South Sea sediments, contents of major elements were generally similar while contents of trace elements were significantly different. Furthermore, within this basin, there were some variabilities in trace element compositions. In the western slope sediments (WS), Mo was enriched over 6 times as much as other sites. On the other hand, Zr, Nb, Hf and Ta were enriched in basin sediments (Basin), and Ca and Cs were enriched in southern slope sediments (SS). After excluding elements derived from biogenic, authigenic and diagenetic origins, the lithogenic elements (K, Ti, Cs, Zr, Nb, Hf and Ta) could be classified into three groups from the comparison of element/Al ratios among cores. The first group consisted of elements (K and Ti) that showed the nearly similar element/Al ratios among three cores. The second group contained Cs which showed significant difference between two slope sediments. The third group elements (Zr, Nb, Hf and Ta) showed highly enriched in basin relative to both slope areas. The depth profiles of metal/Al ratios in basin sediments provided the following interpretation for the compositions of sediment and their variation. From 10,000 yr B.P. to 7,000 yr B.P. two lithogenic components (volcanic ashes and western slope sediments) were mixed and deposited in the basin. After 7,000 yr B.P., however, southern slope sediments were mixed with volcanic ashes and deposited in basin area. This event of source change is nearly close to inflow period of the Tsushima Warm Current to Ulleung Basin. Thus, it might be suggested that element geochemistry in Ulleung basin sediment indicate the change of current system in the study area.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.8
• /
• pp.1270-1276
• /
• 2013

Laver, a red algae belonging to the genus Porphyra tenera, is one of the most widely consumed edible seaweeds in Korea, China, and Japan. Lavers are usually consumed in dried, roasted, and seasoned forms to improve their palatability. We evaluated the composition of amino acids, minerals, and trace heavy metals in these three differently cooked forms of laver. The moisture and ash contents of three differently cooked lavers ranged from 1.49~9.69% and 6.07~10.31%, respectively. The crude protein and lipid content ranged from 17.24~36.88% and 0.52~42.42%, respectively. Dried laver was found to be a good source of amino acids such as taurine, alanine, and glutamic acid (871.10 mg, 833.53 mg, and 719.77 mg per 100 g dry weight, respectively). Laver was a good source of macro and micro minerals such as K, Ca, Mg, Na, P, I, and Fe, although laver more extensively cooked (roasted and seasoned) contained less minerals compared to the dried form. Mercury levels in the three differently cooked forms of laver were all less than 100 ng/g dry weight (the limit of detection with our methodology). The levels of arsenic were the most abundant elements in the differently cooked laver. There was a clear variation, depending on the cooking process, in terms of amino acid, mineral, and trace metal contents of laver.

• Korean Journal of Soil Science and Fertilizer
• /
• v.11 no.2
• /
• pp.119-126
• /
• 1979

Rice seeds, suweon 264, were germinated under 5 levels of toxic heavy metals, Cd(0, 0.05, 0.5, 5, 20ppm), Cu(0, 0.05, 0.5, 5, 20, ppm), Cr(0, 0.5, 1, 5, 10ppm), Ni(0, 0.5, 1, 5, 10ppm), Co(0, 0.5, 1, 5, 10ppm), Zn(0, 0.5, 5, 20, 40, ppm), Pb(0, 0.5, 5, 20, 40ppm) and Mn(0, 1, 10, 25, 50, ppm) in culture solution, and then grown with supplying culture solution contained respective concentrations. Germination and growth response to the toxic heavy metals were studied. Results obtained are as follows : 1) The germination injury of rice seeds by excess concentration of toxic heave metal in culture solution occured in Cd and Cu; below 0.05 ppm, Ni; below 0.5 ppm, Mn; below 1.0 ppm, Co and Cr; 0.5-1.0 ppm, and 0.5-5 ppm, Zn and Pb. Thereby, in the order of degrees of the elements toxicity to germination, they were arranged as follows : Cd>Cu>Ni>Co>Cr>Mn>Zn$$\geq_-$$Pb. 2) Toxic heavy metal concentrations in culture solution, which result in decreasing dry weight due to the injury of excess concentration of treated elements, were Cd: below 0.05 ppm, Ni, Cr and Co; below 0.5 ppm, Cu and Zn; 0.5-5 ppm, Pb; 5-20 ppm and Mn; 10-25 ppm. The order was Ni>Cd>Cr>Co>Cu$$\geq_-$$Zn>Pb>Mn. 3) The critical contents of Cd, Ni, Pb, Cu, Zn, Mn, and Co in dry matter, Which result in decreasing dry weight, were considered to be 0.05-15.5, 1.50-25.0, 24.0-28.0, 26.5-62.5, 470-645.0, 231.0-500.0 and below 15.0 ppm, respectively. 4) The contents of Cr, Co, Cd, Pb, Ni, Cu and Zn in dry matter by 0.5 ppm treatment concentration of each heavy metals was trace, 15.0, 17.5, 24.0, 25.0, 84.5 and 470.0 ppm, respectively. Thereby, in the order of each element to uptaked by rice seedlings, they were arranged as follow; Zn>Cu>Ni>Pb>Cd>Co>Cr. 5) The hazardous concentrations of root activity by toxic heavy metals in culture solution were Cd; below 0.05, Cu; 0.05-0.5, Cr; below 0.5, Ni; 0.5-1.0, Co; 0.5-1.0, Zn; above 0.5, Pb; 0.5-5.0 and Mn; 1.0-10.0 ppm. The hazardous degree of root activity by toxic heave metals was in the order of Cd>Cu>Cr>Zn>Ni>Co>Pb>Mn.