• 제목/요약/키워드: contact structure

검색결과 1,794건 처리시간 0.027초

유한요소해석을 이용한 차대차 측면충돌에 대한 연구 (A Study on Side Impact from Car-to-Car using Finite Element Analysis)

  • 한영규;백세룡;윤준규;임종한
    • 한국인터넷방송통신학회논문지
    • /
    • 제15권3호
    • /
    • pp.201-209
    • /
    • 2015
  • 차대차의 측면충돌에서 충돌부위에 따라 차체의 변형정도는 크게 달라진다. 충돌로 인하여 차체에 변형이 일어나는 경우에 속도에너지가 변형에너지로 전달되어 거동이 달라진다. 일반적으로 교통사고분석에서는 충돌 후 차량의 거동을 운동량 보존법칙으로 분석하며 차체의 변형에 따른 에너지 흡수량은 반발계수를 입력하여 그 오차를 보정할 수 있으나 측면충돌에 대한 연구결과는 그다지 많지 않으므로 전방충돌과 후방추돌에 대한 연구결과를 참고해서 반발계수를 적용하고 있는 실정이다. 본 연구에서는 차체의 구조와 각 부품의 재질을 적용한 유한요소 차량모델을 외연적 유한요소법으로 해석하였으며, 그 결과를 분석하여 측면충돌에서 차량의 접촉부위에 따른 반발계수와 충돌감지시간을 도출하였다. 최종적으로 산출된 반발계수와 충돌감지시간을 적용하여 운동량보존법칙에 의해 얻어진 해석결과를 실제 차량의 충돌결과와 비교하였다. 그 결과로 유한요소해석 모델을 이용하여 도출한 초기 입력값을 적용했을 때 기존의 분석기법보다 해석의 신뢰도가 높다는 결과를 얻게 되었다.

Pluronic을 기초로 한 온도와 pH에 민감한 그래프트 공중합체의 합성과 특성 (Synthesis and Characterization of Temperature and pH Sensitive Graft Copolymers Based on Pluronic)

  • 오연정;이기백;박성영
    • 폴리머
    • /
    • 제36권2호
    • /
    • pp.223-228
    • /
    • 2012
  • 온도와 pH 민감성을 갖는 그래프트 공중합체[Pluronic-$g$-poly(NIPAAm-$co$-MMA), Polymer A]와 [Pluronic-$g$-poly(NIPAAm-$co$-MAA), Polymer C]는 $t$-butylperoxybenzoate를 이용하여 Pluronic 공중합체의 주사슬에 $N$-isopropylacrylamide (NIPAAm)/$N,N$-diethylaminoethylmethacrylate (DEAEMA)와 $N$-isopropylacrylamide(NIPAAm)/methacrylic acid (MAA)를 각각 합성하였다. 그래프트 공중합체는 $^1H$ NMR과 젤 투과 크로마토그래피를 통해 공중합체의 화학적 구조와 분자량을 측정하였다. 그래프트 공중합체의 수용액 상에서의 특성은 다른 온도와 pH 조건에서 자외 및 가시선 분광 분석법, 접촉각 측정과 동적 광산란으로 측정되었다. 그래프트 공중합체는 수용액상에서 온도와 pH에 따라 민감한 상 변화를 보인다. 이는 DEAEMA 단량체의 아민 그룹과 MAA 단량체의 카복실 그룹은 각각 Polymer A와 Polymer C에서 하한임계용액온도에 큰 영향을 미친다고 제시한다. 그래프트 공중합체는 온도와 pH 변화에 관련된 다양한 약물 전달과 분자 스위치 적용에 사용될 수 있다.

지오텍스타일 튜브의 2차원 평형해석 및 수리모형시험을 통한 안전성 분석 (2-Dimensional Equilibrium Analysis and Stability Analysis of Geotextile Tube by Hydraulic Model Test)

  • 신은철;오영인
    • 한국지반공학회논문집
    • /
    • 제18권5호
    • /
    • pp.251-260
    • /
    • 2002
  • 지오텍스타일 튜브공법은 고강도 토목섬유인 지오텍스타일을 튜브모양으로 봉합하여 수리학적 방법이나 기계적인 방법으로 내부에 토사를 채워 구조물을 형성하는 공법으로, 지오텍스타일 튜브구조물은 지오텍스타일에 구속된 토사 체로 구성되며, 지오텍스타일과 토사의 복합거동 특성을 나타낸다. 또한, 구조물의 활용분야가 해안 및 호안 침식방지 구조물이나 방파제, 제방 등에 적용되어지므로 설계 및 안정해석 시, 지반공학적 검토와 파도에 의한 수리동역학적 검토가 필요하다. 본 연구에서는 지오텍스타일 튜브의 효율적인 안정해석방법에 대하여 분석하기 위하여, 방파제 (Breakwater), 이안제(Detached breakwater), 돌제(Groin)등과 같은 해안구조물의 경험 및 2차원 평형해석방법을 검토 및 적용하였으며, 해석결과의 실험적 분석을 위하여 이안제형태의 지오텍스타일 튜브에 대한 수리모형시험을 실시하였다. 본 연구에서 수행한 경험식 및 2차원 평형해석 분석은 기존의 수리모형시험을 통하여 도출된 경험식과 파도의 작용을 외력으로 한 2차원 평형해석이론을 적용.검토하였다. 또한, 수리모형시험을 통한 안정해석은 지오텍스타일 튜브의 형태(채움비율 변화), 유의파고(Significant wave height), 천단고(구조물 상부수심)의 확보유무 등의 해석변수조건을 적용하였다. 2차원 평형해석에 의한 지오텍스타일 튜브의 안정해석결과, 활동 및 전도에 대한 안정성은 튜브형태, 접지면적, 유의파고, 투영면적 등의 복합상관관계로 비선형적인 변화를 나타내었으며, 수리모형시험을 통한 안정성 검토결과, 경험식 및 2차원 평형해석결과와 근접한 결과를 나타내었다.

동양적 세계관의 관점에서 본 한국도시경관의 특성 (A Study on the Characteristics of Korean Townscape in Perspective of the Oriental World View)

  • 김한배;이규목
    • 한국조경학회지
    • /
    • 제21권4호
    • /
    • pp.55-68
    • /
    • 1994
  • It has been generally agreed that the city form especially in the preindustrial age resembled their own world view, either in the western or the eastern cultural sphere. So, we aimed to redefine the characteristics of oriental world views compared with the western one, in order to find the relative nature of the Korean townscapes. It is said that the both world views(of western and oriental) are composed of the contrastive binary concepts in common, but there seems to have been nearly contrary differences in these two world views. Wheareas the former was based on the passively segregational and oppositional dualism, the latter, on the dynamically harmonious and complementary dualism, called generally as 'Yin(陰) and Yang(陽)'. Thus, the oriental world view can be thought as the 'philosophy of the relationship', which aim to unify the dualism ultimately with the help of this relationship. So, we can assume a certain third and intermediate concept between these dual concepts of the world view, which can unify these two into the one holistic whole. And the focuses of the most traditional oriental philosophies were concentrated on this, so called, 'the third concept', namely Taoistic 'Tochu(道樞)', Buddhistic 'Kong(空)' or Confucian 'Chung(中)'. And this triple concept, including the third one, of the oriental world view revealed a more concrete form of the cosmological relationship, as the triple structure; 'Heaven(天), Earth(地), and Man(人)', in which the 'Man' is thought as the middle or the center of the world. In this manner, we could found this oriental 'triple world view' was revealed in the real topology of most places in the Korean traditional city and the whole townscape itself. So, in the scale of houses and the roads around them, we can construe the 'Maru(a central board-floored room)' and the 'Madang(a inner court)' as the 'third and intermediate space(中)' between the interior space(陰) and exterior space(陽) in the former, and between the private house(陰) and the public residential road(陽) in the former case, and between the dual parts(陰,陽) of the city representing the contrary social classes and the contrastive visual landscapes. So, we insist that this 'triple world view' represented in the townscape can be one of the most important characteristics of Korean traditional townscape. And this third intermediate spaces, which generate the active social contact and the harmonious relationship among the people, can be the most important cues, as the central places, in the interpretation of the Korean townscapes even in contemporary circumstance, which inherits its spatial and social frame more or less from the preceding one.

  • PDF

인공 진피(알로덤®)을 이용한 하지의 골이 노출된 연부 조직 결손의 재건 (Reconstruction of the Bone Exposed Soft Tissue Defects in Lower Extremities using Artificial dermis(AlloDerm®))

  • 전만경;장영철;고장휴;서동국;이종욱;최재구
    • Archives of Plastic Surgery
    • /
    • 제36권5호
    • /
    • pp.578-582
    • /
    • 2009
  • Purpose: In extensive deep burn of the lower limb, due to less amount of soft tissue, bone is easily exposed. When it happens, natural healing or reconstruction with skin graft only is not easy. Local flap is difficult to success, because adjacent skins are burnt or skin grafted tissues. Muscle flap or free flap are also limited and has high failure rate due to deep tissue damage. The authors acquired good outcome by performing one - stage operation on bone exposed soft tissue defect with AlloDerm$^{(R)}$(LifeCell, USA), an acellular dermal matrix producted from cadaveric skin. Methods: We studied 14 bone exposed soft tissue defect patients from March 2002 to March 2009. Average age, sex, cause of burn, location of wound, duration of admission period, and postoperative complications were studied. We removed bony cortex with burring, until conforming pinpoint bone bleeding. Then rehydrated AlloDerm$^{(R)}$(25 / 1000 inches, meshed type) was applicated on wound, and thin split thickness(6 ~ 8 / 1000 inches) skin graft was done at the immediately same operative time. Results: Average age of patients was 53.6 years(25 years ~ 80 years, SD = 16.8), and 13 patients were male(male : female = 13 : 1). Flame burn was the largest number. (Flame burn 6, electric burn 3, contact burn 4, and scalding burn 1). Tibia(8) was the most affected site. (tibia 8, toe 4, malleolus 1, and metatarsal bone 1). Thin STSC with AlloDerm$^{(R)}$ took without additional surgery in 12 of 14 patients. Partial graft loss was shown on four cases. Two cases were small in size under $1{\times}1cm$, easily healed with simple dressing, and other two cases needed additional surgery. But in case of additional surgery, granulation tissue has easily formed, and simple patch graft on AlloDerm$^{(R)}$ was enough. Average duration of admission period of patients without additional surgery was 15 days(13 ~ 19 days). Conclusion: AlloDerm$^{(R)}$ and thin split thickness skin graft give us an advantage in short surgery time and less limitations in donor site than flap surgery. Postoperative scar is less than in conventional skin graft because of more firm restoration of dermal structure with AlloDerm$^{(R)}$. We propose that AlloDerm$^{(R)}$ and thin split thickness skin graft could be a solution to bone exposured soft tissue defects in extensive deep burned patients on lower extremities, especially when adjacent tissue cannot be used for flap due to extensive burn.

고추 역병균(疫病菌) (Phytophthora capsici)의 난포자(卵胞子) 형성(形成)에 미치는 온도(溫度) 및 영양(營養)의 효과(效果) (Effect of Temperature and Nutrition Affecting Oospore Formation of Phytophthora capsici Causing Red Pepper Fruit Rot)

  • 정봉구;강미정
    • 한국균학회지
    • /
    • 제18권4호
    • /
    • pp.203-208
    • /
    • 1990
  • 고추 역병균(疫病菌) 유성세대(有性世代)인 난포자(卵胞子)는 원형(円形)이며 막(膜)이 두텁고 크기는 $24.4\;{\mu}m$$(20{\sim}32.5{\mu}m)$ 이며 장난기(藏卵器)는 $26.7\;{\mu}m$$(21{\sim}37.5{\mu}m)$이고 장정기(藏精器)는 도우낫모양으로 크기는 $6.5{\times}4\;{\mu}m(6{\sim}8{\times}5{\sim}6\;{\mu}m)$이었다. 난포자(卵胞子)의 형성단계(形成段階)는 접종(接種) 직후(直後) 각(各) 배우자형(配偶者型)의 균사(菌絲)가 신전(伸展)되어 접촉(接觸)되고 확장기(擴張期)로 이어지면서 완숙난포자(完熟卵胞子)로 되기까지 사단계(四段階)로 구분(區分)되었다. 난포자(卵胞子) 형성(形成)에 최적온도(最適溫度)는 $20{\sim}24^{\circ}C$이었고 온도(溫度)가 $25^{\circ}C$ 이상되면 오히려 감소(減少)하는 경향(傾向)이었다. 새로운 호박배지는 기존(旣存) V-8 한천배지(寒天培地)보다 많은 난포자(卵胞子) 형성(形成)을 보였으나 고추잎배지(培地)에서는 난포자(卵胞子)가 형성(形成)되지 않았다. $1800{\pm}300$$800{\pm}300$ Lux의 주야(晝夜) 광조사(光照射)는 암조건(暗條件)보다 오히려 난포자(卵胞子) 형성(形成)에 저해적(沮害的)이었다.

  • PDF

식물의 자가불화합성, 최근의 진보 (Recent Advances in the Studies of Self-Incompatibility of plants)

  • 한창열;한지학
    • 식물조직배양학회지
    • /
    • 제21권5호
    • /
    • pp.253-275
    • /
    • 1994
  • Many flowering plants possess genetically controlled self -incompatibility (SI) system that prevents inbreeding and promotes outcrosses. SI is usually controlled by a single, multiallelic S-locus. In gametophytically controlled system, SI results when the S-allele of the pollen is matched by one of the two S-alleles in the style, while in the sporophytic system self-incompatible reaction occurs by the interaction between the pistil genotype and genotype of, not the pollen, but the pollen parent In the former system the self-incompatible phenotype of pollen is determined by the haploid genome of the pollen itself but in the latter the pollen phenotype is governed by the genotype of the pollen parent along with the occurrence of either to-dominant or dominant/recessive allelic interactions. In the sporophytic type the inhibition reaction occurs within minutes following pollen-stigma contact, the incompatible pollen grains usually failing to germinate, whereas in gametophytic system pollen tube inhibition takes place during growth in the transmitting tissue of the style. Recognition and rejection of self pollen are the result of interaction between the S-locus protein in the pistil and the pollen protein. In the gametophytic SI the S-associated glycoprotein which is similar to the fungal ribonuclease in structure and function are localized at the intercellular matrix in the transmitting tissue of the style, with the highest concentration in the collar of the stigma, while in the sporophytic SI deposit of abundant S-locus specific glycoprotein (SLSG).is detected in the cell wall of stigmatic papillae of the open flowers. In the gametophytic system S-gene is expressed mostly at the stigmatic collar the upper third of the style length and in the pollen after meiosis. On the other hand, in the sporophytic SI S-glycoprotein gene is expressed in the papillar cells of the stigma as well as in e sporophytic tape is cells of anther wall. Recognition and rejection of self pollen in the gametophytic type is the reaction between the ribonuclease in the transmitting tissue of the style and the protein in the cytoplasm of pollen tube, whereas in the sporophytic system the inhibition of selfed pollen is caused by the interaction between the Sycoprotein in the wall of stigmatic papillar cell and the tapetum-origin protein deposited on the outer wall of the pollen grain. The claim that the S-allele-associated proteins are involved in recognition and rejection of self pollen has been made merely based on indirect evidence. Recently it has been verified that inhibition of synthesis of S$_3$ protein in Petunia inflata plants of S$_2$S$_3$ genotype by the antisense S$_3$ gene resulted in failure of the transgenic plant to reject S$_3$ pollen and that expression of the transgenic encoding S$_3$ protein in the S$_1$S$_2$ genotype confers on the transgenic plant the ability to reject S$_3$ pollen. These finding Provide direct evidence that S-proteins control the s elf-incompatibility behavior of the pistil.

  • PDF

SH-EMAT의 신호 수신을 위한 광섬유 패브리-페롯 간섭계 센서의 적용 (Application of a Fiber Fabry-Pérot Interferometer Sensor for Receiving SH-EMAT Signals)

  • 이진혁;김대현;박익근
    • 비파괴검사학회지
    • /
    • 제34권2호
    • /
    • pp.165-170
    • /
    • 2014
  • 수평횡파(SH-wave)는 배관과 같은 박판 구조물에서 판파 모드로 전파하고 분산성이 단순하여 구조물의 건전성 평가에 유용하다. 전자기초음파탐촉자(EMAT)는 비접촉식으로 자석과 코일 배열을 조절하여 수평횡파를 발생하기 용이하다. 따라서 수평횡파 전자기초음파탐촉자(SH-EMAT)를 이용한 자동화 검사 시스템은 박판 구조물 건전성 감시에 매우 유용하다. 하지만 발전설비 또는 자동화 장비 등에서는 전자기노이즈가 상당히 많이 발생하고 EMAT 수신 센서는 전자기노이즈에 취약한 면이 있다. 광섬유 센서는 빛을 이용하여 전자기노이즈 환경에서 매우 유용하게 활용될 수 있다. 본 연구에서는 이러한 환경적 제약을 고려하여 광섬유 패브리-페롯 간섭계(FFPI)를 SH-EMAT으로 발생되는 초음파의 수신용 센서로 제안하였다. 평판시험편에서 SH-EMAT의 신호를 FFPI 센서를 이용하여 수신하고 이 신호에 대한 분석을 하였다. 제안된 FFPI 센서가 EMAT으로 가진된 SH wave의 신호를 명료하게 수신할 수 있음을 확인하였다.

Ultrastructure of the Testis and Germ Cell Development During Spermatogenesis in Male Crassostrea gigas (Bivalvia: Ostreidae) in Western Korea

  • Kim, Jin-Hee;Chung, Ee-Yung;Choi, Ki-Ho;Lee, Ki-Young;Choi, Moon-Sul
    • 한국패류학회지
    • /
    • 제26권3호
    • /
    • pp.235-244
    • /
    • 2010
  • Ultrastructural characteristics of the testis and spermatogenesis of Crassostrea gigas were investigated by Transmission and Scanning Electron microscope observations. The testis is a diffuse organ consisting of branching acini containing differentiating germ cells in a variety of stages. The acinus is surrounded by an intermitent layer of myoepithelial cells andis divided into subcompartments that are partially separated by pleomorphic accessory cells which remain in close contact with germ cells until late stages of development. these accessory cells contain a large quantity of glycogen particles and lipid droplets in the cytoplasm. Therefore, it is assumed that they are involved in the supplying of the nutrients for germ cell development, while any phenomena associated with phagocytosis of undischarged, residual sperms by lysosomes could be find in the cytoplasm of the accessory cells. The morphology of the spermatozoon has a primitive type and is similar to those of other bivalves. Mature spermatozoa consist of broad, cap-shaped acrosomal vesicle, subacrosomal material (containing axial rod embedded in a granular matrix), a oval nucleus showing deeply invaginated anteriorly, two triplet substructure centrioles surrounded by four spherical mitochondria, and satelite fibres appear to the distal centriole and plasma membrane. Spermatozoa of C. gigas resemble to those of other investigated ostreids. In particular, the anterior region of the acrosomal vesicle is transversely banded. It is assumed that differences in this acrosomal substructure are associated with the inability of fertilization between the genus Crassostrea and other genus species in Ostreidae. Therefore, we can use sperm morphology in the resolution of taxonomic relationships within the Ostreidea. The spermatozoon is approximately $42-47{\mu}m$ in length including an oval sperm nucleus (about $0.91{\mu}m$ in length), an acrosome (about $0.42{\mu}m$ in length) and tail flagellum ($40-45{\mu}m$). The axoneme of the sperm tail flagellum consists of nine pairs of microtubules at the periphery and a pair at the center. The axoneme of the sperm tail shows a 9 + 2 structure. These morphological charateristics of acrosomal vesicle belong to the family Ostreidae in the subclass Pteriomorphia.

표면 개질된 마이크로피브릴화 셀룰로오스를 이용한 폴리아마이드 섬유와의 복합페이퍼 제조 및 특성평가 (Synthesis and Characterization of Composite Paper Using Polyamide Fiber and Surface Modified Microfibrillated Cellulose)

  • 이종희;임정혁;김기영;김경민
    • 폴리머
    • /
    • 제38권1호
    • /
    • pp.74-79
    • /
    • 2014
  • 두 가지 서로 다른 실란 화합물인 3-aminopropyltriethoxysilane(APS)과 3-mercaptopropyltriethoxysilane(MRPS) 그리고 lauroyl chloride를 이용하여 마이크로피브릴화 셀룰로오스(MFC) 표면을 화학적으로 개질하였다. 화학적으로 표면 처리한 MFC의 구조 및 특성은 FTIR, EDX, TGA, 접촉각 등을 측정하여 분석하였다. 이렇게 유기 관능기로 치환된 MFC와 폴리아마이드(PA) 섬유를 사용하여 복합 페이퍼를 제조하였다. MFC의 표면 개질은 MFC 사이의 응집을 막아줄 뿐만 아니라 PA 섬유와의 접착성을 향상시켜 주는 역할을 한다. 단섬유인 PA 섬유를 연결시켜주는 바인더 역할을 하는 MFC 없이는 페이퍼를 제조할 수가 없었다. 즉, 표면 개질된 MFC는 PA 섬유 내에서 분산되어 PA 섬유들을 연결시켜 복합페이퍼의 제조를 가능하게 하였다. 두 가지 실란 화합물로 개질된 MFC를 이용한 복합페이퍼의 인장강도와 인장탄성률의 기계적 물성은 lauroyl 그룹으로 치환된 MFC를 이용한 복합페이퍼에 비하여 우수하였다. 화학적으로 표면 처리한 MFC와 PA 섬유로 제조된 복합페이퍼의 모폴로지와 기계적 물성은 SEM과 UTM을 통하여 분석하였다.