• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.18 no.3
• /
• pp.235-242
• /
• 1985

The mechanics of the walking shrimps is useful to clarify the fishing mechanisms in relation to the fishing gears. The gaiting behaviour concerning step positions and step timings on the flat board and the nettings, 16, 23 and 37mm in mesh size were experimented in the aquarium using video camera from June to October, 1984. It was found that the irregular movements of walking legs in step positions and step patterns were appeared on the nettings more than the flat surface due to the absence of mechanical contact with the substrates. The mean stride length and coefficient of variation of the periods in the walking shrimps on the flat board were significantly different from those values on the nettings, However, the velocity, the period and the ratio of forestroke to backstroke were unsteadily changed with the carapace length, and showed little difference under the four conditions. The mean phase difference on the flat board was greater than those values on the nettings which were decreased, while standard deviation on the flat board was smaller than those values on the nettings which were increased with increasing in mesh size.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.38 no.2
• /
• pp.133-138
• /
• 2012

The purpose of this study was to examine the correlation between physical properties of dried coacervate films and dry feel for shampoo composition. Simple shampoo compositions were made of two different cationic charge density polymers in the same surfactant compositions. The simple shampoo compositions were diluted with distilled water to make coacervate. Formed coacervate was collected by centrifuge (3,000 rpm, 30 min). Coacervate was coated on the glass plates and dried in drying oven (for 1 h, $50^{\circ}C$) to make the thin film. We carried out an experiment on measurement of contact angle, moisture loss ratio and SEM image analysis of the dried coacervate film. Dry feelings of the shampoos were evaluated by panel using hair tresses. Results show that the properties of dried coacervate films affect the dry feel of the after shampooing.

• Korean Journal of Veterinary Research
• /
• v.9 no.1
• /
• pp.71-78
• /
• 1969

The present studies were undertaken to determine accurately whether Korean native fresh-water shrimps can serve as the second intermediate host of Clonorchis sinensis. The experimental results obtained were as follows; 1. Metacercaria of Clonorchis sinensis was not discovered in 36 Macrobranchium nipponensis (De Hann), 1992 Palaemon paucidens (De Hann) and Palaemon madestus Heller, and 860 Caridina leucastica Stimpson, collected in Kimhae district, which were digested in artificial gastric juice, using binocular dissecting microscope. 2. Cercariae of the Chinese liver fluke could not approach the body wall of young shrimps due to streaming caused by their motion. 3. Young Palaemon spp. of 247 were divided into two groups and placed in two different room aquariums, one is at high temperature, the other is normal. Then they were contacted with the cercariae. Only 11 degenerated metacercariae were found in 9 Palaemon spp. It was suggested that they had died immediately or within a few days after penetration. Furthermore the temperature did not affect the infective ratio. 4. At the field experimental aquarium, no metacercaria of Clonorchis sinensis was discovered tn 100 Palaemon spp. which had been brought into contact with 5000 Parafossarulus manchouricus two trials. 5. Specific changes in the cercariae mixed with the extract of shrimps meat were not observed through the dissecting microscope. 6. These results suggest that the Korean native shrimps cannot serve as the intermediate host of Clonorchis sinensis.

• Journal of Korean Society on Water Environment
• /
• v.36 no.2
• /
• pp.137-147
• /
• 2020

A direct contact membrane distillation (DCMD) was applied to treat strong nitrogenous wastewater of anaerobic digestion supernatant (ADS) and human urine (HU). The ammonia transfer was evaluated in terms of specific ammonia transfer (SAT) value, which is the ratio of total ammoniacal nitrogen divided by the amount of water transferred. The acidification resulted in low SAT values and high quality of produced water. The ammonia transfer control in the acidic condition was stronger for HU than ADS due to higher alkalinity (pH 8.8) and ammonia concentration (5700 mg-N/L) of HU. Acidified HU at pH 4 exhibited a SAT value of 1.64 × 10^-5, which was significantly smaller than the SAT value of 3.00 × 10^-3 for the original HU. The low pH enhanced the water flux for ADS, but HU showed a steep decrease in water flux due to enhanced fouling. It was considered that the fouling intensity in acidic conditions depends on the characteristics of the wastewater source. The major foulants on the MD membrane were NaCl, CaCO₃ and CuSO₄ as recognized by the SEM-EDS. Acidified ADS and HU at pH 4 showed relatively high N content of 8.18 % and 28.03 %, respectively, as organic fouling.

• Journal of Oral Medicine and Pain
• /
• v.25 no.4
• /
• pp.355-364
• /
• 2000

This study was to find dental materials causing hypersensitivity reactions by carrying out patch tests in the patients with oral mucosal lesions to investigate the possibility of hypersensitivity reactions in etiology of oral mucosal lesions. 31 patients (female 26, male 5, age range 24-72 years) with oral mucosal lesions were classified as patient group, and 41 volunteers (female 24, male 17, age range 23-40 years) without oral mucosal lesion, systemic disease and history of allergy as control group. The obtained results were as follows: 1. There were various dental restorations in most of patient group and control group, 29(94%) in 31 patient group, 35(85%) in 41 control group. 2. Among sites of oral mucosal lesions, buccal mucosa was the most common site with 60%, followed by gingiva with 24%, tongue with 16%. Lesions in contact with restorations were highly 90% in tongue and 89% in buccal mucosa, but comparatively lower 53% in gingiva. 3. The ratio of positive reactions to the patch test in patient group was significantly higher than the control group (p<0.05). 4. Dental materials causing positive reactions to the patch test were mainly mercury(19%), potassium dichromate(16%), cobalt chloride(16%) in patient group, cobalt chloride(17%) in control group. 5. In 20 patients with lichen planus, 8 patients(40%) showed positive reactions to the patch test.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.2
• /
• pp.240-248
• /
• 1998

The plasma chemical vapor deposition is one of the most utilized techniques for the diamond growth. As the applications of diamond thin films prepared by plasma chemical vapor deposition(CVD) techniques become more demanding, improved fine-tuning and control of the process are required. The important parameters in diamond film deposition include the substrate temperature, $CH_4/H_2$ gas flow ratio, total, gas pressure, and gas excitation power. With the spectroscopic ellipsometry, the substrate temperature as well as the various parameters of the film can be determined without the physical contact and the destructiveness under the extreme environment associated with the diamond film deposition. It is introduced how the real-time spectroscopic ellipsometry is used and the data are analyzed with the view of getting the growth condition and the accompanied features for a good quality of diamond films. And it is determined the important parameters during the diamond film growth, which include the final sample will be measured with Raman spectroscopy to confirm the diamond component included in the film.

• Journal of Information Display
• /
• v.7 no.4
• /
• pp.21-23
• /
• 2006

We developed a 4.5" 192${\times}$64 active matrix organic light-emitting diode display on a glass using organic thin-film transistor (OTFT) switching-arrays with two transistors and a capacitor in each sub-pixel. The OTFTs has bottom contact structure with a unique gate insulator and pentacene for the active layer. The width and length of the switching OTFT is 800${\mu}m$ and lO${\mu}m$ respectively and the driving OTFT has 1200${\mu}m$ channel width with the same channel length. On/off ratio, mobility, on-current of switching OTFT and on-current of driving OTFT were $10^6,0.3{\sim}0.5$ $cm^2$/V·sec, order of 10 ${\mu}A$ and over 100 ${\mu}A$, respectively. AMOLEDs composed of the OTFT switching arrays and OLEDs made using vacuum deposition method were fabricated and driven to make moving images, successfully.

• Journal of the Korean Ceramic Society
• /
• v.52 no.6
• /
• pp.455-461
• /
• 2015

Porous ceramics with tailored pore size and shape are promising materials for the realization of a number of functional and structural properties. A novel method has been reported for the investigation of the role of SiC in the formation of $SiO_2$ foams by colloidal wet processing. Within a suitable pH range of 9.9 ~ 10.5 $SiO_2$, particles were partially hydrophobized using hexylamine as an amphiphile. Different mole ratios of the SiC solution were added to the surface modified $SiO_2$ suspension. The contact angle was found to be around $73^{\circ}$, with an adsorption free energy $6.8{\times}10^{-12}J$. The Laplace pressure of about 1.25 ~ 1.6 mPa was found to correspond to a wet foam stability of about 80 ~ 85%. The mechanical and thermal properties were analyzed for the sintered ceramics, with the highest compressive load observed at the mole ratio of 1:1.75. Hertzian indentations are used to evaluate the damage behavior under constrained loading conditions of $SiO_2$-SiC porous ceramics.

• The korean journal of orthodontics
• /
• v.47 no.4
• /
• pp.229-237
• /
• 2017

Objective: The aim of this study was to compare the initial stability as insertion and removal torque and the clinical applicability of novel orthodontic zirconia micro-implants made using a powder injection molding (PIM) technique with those parameters in conventional titanium micro-implants. Methods: Sixty zirconia and 60 titanium micro-implants of similar design (diameter, 1.6 mm; length, 8.0 mm) were inserted perpendicularly in solid polyurethane foam with varying densities of 20 pounds per cubic foot (pcf), 30 pcf, and 40 pcf. Primary stability was measured as maximum insertion torque (MIT) and maximum removal torque (MRT). To investigate clinical applicability, compressive and tensile forces were recorded at 0.01, 0.02, and 0.03 mm displacement of the implants at angles of $0^{\circ}$, $10^{\circ}$, $20^{\circ}$, $30^{\circ}$, and $40^{\circ}$. The biocompatibility of zirconia micro-implants was assessed via an experimental animal study. Results: There were no statistically significant differences between zirconia micro-implants and titanium alloy implants with regard to MIT, MRT, or the amount of movement in the angulated lateral displacement test. As angulation increased, the mean compressive and tensile forces required to displace both types of micro-implants increased substantially at all distances. The average bone-to-implant contact ratio of prototype zirconia micro-implants was $56.88{\pm}6.72%$. Conclusions: Zirconia micro-implants showed initial stability and clinical applicability for diverse orthodontic treatments comparable to that of titanium micro-implants under compressive and tensile forces.

• Journal of the Korean Geosynthetics Society
• /
• v.14 no.1
• /
• pp.33-41
• /
• 2015

In this study, laboratory tests (flow, unit weight, unconfined compressive strength and bleeding tests) were performed to evaluate engineering properties of treated soil to improve pipe mixing method. As result, flow and bleeding properties are proportional to the water contents. The unit weight and unconfined compressive strength is decreased as the water contents increased. Comparing equipments contact pressure with bearing capacity of the mixed soil for dozer, backhoe and belt conveyor are immediately appliable. The applicable water content range is estimated from 80% to 200% by pipe mixing method using cement. Also, The design chart is developed from the results.