• The Journal of Engineering Geology
• /
• v.20 no.1
• /
• pp.71-78
• /
• 2010

The Gagok mine is a contact metasomatic deposit, located at Gagok-myeon, Samcheok city and Cheoram-dong, Taebaek city, Gangwon province. The deposit lies within the limestone of Myobong and Pungchon formations, and exists the contact of intrusive granite porphyry. In order to determine the direction and extension of mineralization in the gallery and around the entrance of the ore deposit, we used the ground magnetic survey, the direct current (dc) resistivity survey using dipole-dipole array, and resistivity tomography survey. The ground magnetic survey did not detect the anomalous zone due to ore deposit, while the dc resistivity survey and resistivity tomography survey were successful in delineating the anomalous zone related to the extension of fault toward $N50^{\circ}W$.

• Economic and Environmental Geology
• /
• v.30 no.6
• /
• pp.543-551
• /
• 1997

Poongjeon talc deposits is emplaced in dolomite and dolomitic limestone of the Cambro-Ordovician Samtaesan Formation. Ore in Poongjeon is low grade talc and the deposit has been known as the contact metasomatic or hydrothermal replacement type related to the intrusion of late Cretaceous granite in this area. X-ray diffraction, electron microprobe analysis, fluid inclusion and stable isotope analysis were utilized to examine the mineralogy of the ore and the origin of the ore fluid. The ore from Poongjeon mine mainly consists of talc and tremolite with minor amount of illite, vermiculite, smectite, and chlorite-vermiculite mixed layer. Occurrence of ore body indicates that the talc-tremolite ore was formed through the replacement by the $SiO_2$-rich hydrothermal fluid along the bedding and dike boundaries, or contact of amphibolite and basic dike with carbonate rocks. The temperature and pressure of the ore forming fluids at the time of the talc mineralization were estimated as $350^{\circ}C$ and 400 bar, respectively, based on the heating and freezing data of the fluid inclusions in quartz from talc-tremolite veins. During the talc-tremolite formation, fluids were divided into $CO_2$-enriched fluid and $CO_2$-poor fluid from $CO_2$ immiscibility (or effervescence). Oxygen isotope values (${\delta}^{18}O$) of the talc-tremolite fall within a range between 12.2 and 12.9‰. Hydrogen isotope values(${\delta}D$) of the ore range from -60 to -85‰ and $H_2O$ contents range from 2.0 to 3.4 wt.%. ${\delta}^{18}O$ and ${\delta}D$ values of talc ore indicate that the hydrothermal fluid involved in talc-tremolite formation was of igneous origin. Oxygen and hydrogen isotopic exchange between talc ore and the surface water was negligible after talc-tremolite ore formation.

• Economic and Environmental Geology
• /
• v.4 no.3
• /
• pp.113-119
• /
• 1971

The Daeheung Dolomite Mine, which is about 6km south of Danyang, Chungcheongbugdo, is coincided with almost central portion of the Danyang quardrangle scaled in 1 : 50,000. The purpose of this report is to prepare a information for the economic evaluation on the mine. Geology of the region is composed of worm-eaten limestone, crystalline limestone, crystalline dolomite rock, sandstone and shale from bottom, those are applicable to socalled Dumugol and Maggol formation of Ordovician, and batholithic biotite granite is intruded the west-side of the ditto sedimentary rocks. The dolomite bed, emplaced in bottom of the upper limestone formation, so-called Maggol formation, is about 270m in thickness, and dips $30^{\circ}{\sim}50^{\circ}$ northwest. The facies of the dolomite rock contained many brucite crystals is not only coarse-grained crystalline, but also micro crystalline in contact metasomatic parts. 25 samples were taken from the two series, A and B, in the nearly crossed direction to the strike of the dolomite bed as shown in the geological map. They were chemically analysed on the components of MgO, CaO, and $SiO_2$ as shown in Table 2. The estimate ore reserves total some 107,200,000 metric tons above the 320m level with the following average contents: MgO 21.80%, CaO 29.27% and $SiO_2$ 0.64%. It is caused by brucite minerals that MaO content in the dolomite rock is higher than pure dolomite (21.7%). The dolomite ore is possible in use for magnesian fertilizer, magnesian cement and refractory material, especially the microcrystalline dolomite ore is useful for a refractory material in furnaces of iron industries.

• Economic and Environmental Geology
• /
• v.40 no.1 s.182
• /
• pp.1-14
• /
• 2007

The Guemseong mine is located near the southern margin of the Jurassic Jecheon granitoids collectively with the Cambro-Ordovician mixed dolostone-limestone series of the Yeongweol Group, Choseon Supergroup. Here, two spatially distinct types of skarn formation have been observed. The upper transitional skarn is the calcic Mo skarn which has the mineral assemblage of $garnet+hedenbergite+epidote{\pm}wollastonite{\pm}magnetite{\pm}hematite{\pm}amphibole{\pm}chlorite{\pm}vesuvianite$ within the calcite marble. On the other hand, the lower proximal skarn occurs as a discordant magnesian Fe skarn at the contact of Mo-bearing aplitic cupolas with unidirectional solidification texture(UST) within the dolomitic marble. The magnesian Fe skarn has the mineral assemlage $olivine+diopside+magnetite+tremolite+serpentine+talc+chlorite{\pm}phlogopite$. The formation of two different types of skarn and ore mineralization in Geumseong mine have been attributed to multistage and complex metasomatic replacements that ultimately resulted in silicate-oxide-sulfide sequence of metasomatism. An early prograde stage with anhydrous skarn minerals such as olivine, clinopyroxene and/or garnet with magnetite, formed from high temperature (about $500^{\circ}\;to\;400^{\circ}C$) at an environmental condition of low $CO_2$ fugacity ($XCO_2<0.1$) and 0.5 kbar. The later retrograde stage with hydrous silicates such as amphibole, serpentine, phlogopite, epidote and chlorite with molybdenite or hematite, termed from relatively lower temperature (about $400^{\circ}\;to\;300^{\circ}C$).

• Economic and Environmental Geology
• /
• v.15 no.3
• /
• pp.155-166
• /
• 1982

Sulfur isotope compositions (${\delta}^{34}S$) of seventy one sulfide minerals from the Shinyemi ore deposits were determined to range from -10.1 to +5.0‰ with a mean value of +2.1‰. These values are roughly comparable to those of various hydrothermal ore deposits in Korea, about +2.0 to +7.0‰ in ${\delta}^{34}S$, suggesting that they are to be same in source of sulfur. The Shinyemi deposits are grouped into two types; the western bedded skarn orebodies and the eastern small pipes and veins. The ${\delta}^{34}S$ values of sulfide minerals from the bedded orebodies (early mineralization) are ranging from -10.1 to +2.5‰, which is relatively wide in range, whereas those of the pipes and veins. (later mineralization) have a narrow range of ${\delta}^{34}S$ values, +2.7 to +5.0‰, regardless of the kind of sulfide minerals. Isotopic temperature obtained from the sphalerite-galena mineral pairs of the New B orebody appeared to be about 400 to $540^{\circ}C$ are reasonably good agreement with the comparable data of skarn mineral assemblages. It is concluded that the west orebodies were formed in earlier stage at higher temperatures than the east orebodies formed later at lower temperatures. Judging from the various data from the present study, the Shinyemi deposits can be defined as a typical contact metasomatic deposit. The source of sulfur in the hydrothermal solutions is considered to be comagmatic with the Shinyemi granodiorite.