• 제목/요약/키워드: contact behavior

검색결과 1,449건 처리시간 0.023초

Micro Cutting of Tungsten Carbides with SEM Direct Observation Method

  • jung, Heo-Sung
    • Journal of Mechanical Science and Technology
    • /
    • 제18권5호
    • /
    • pp.770-779
    • /
    • 2004
  • This paper describes the micro cutting of wear resistant tungsten carbides using PCD (Poly-Crystalline Diamond) cutting tools in performance with SEM (Scanning Electron Microscope) direct observation method. Turning experiments were also carried out on this alloy (V50) using a PCD cutting tool. One of the purposes of this study is to describe clearly the cutting mechanism of tungsten carbides and the behavior of WC particles in the deformation zone in orthogonal micro cutting. Other purposes are to achieve a systematic understanding of machining characteristics and the effects of machining parameters on cutting force, machined surface and tool wear rates by the outer turning of this alloy carried out using the PCD cutting tool during these various cutting conditions. A summary of the results are as follows: (1) From the SEM direct observation in cutting the tungsten carbide, WC particles are broken and come into contact with the tool edge directly. This causes tool wear in which portions scrape the tool in a strong manner. (2) There are two chip formation types. One is where the shear angle is comparatively small and the crack of the shear plane becomes wide. The other is a type where the shear angle is above 45 degrees and the crack of the shear plane does not widen. These differences are caused by the stress condition which gives rise to the friction at the shear plane. (3) The thrust cutting forces tend to increase more rapidly than the principal forces, as the depth of cut and the cutting speed are increased preferably in the orthogonal micro cutting. (4) The tool wear on the flank face was larger than that on the rake face in the orthogonal micro cutting. (5) Three components of cutting force in the conventional turning experiments were different in balance from ordinary cutting such as the cutting of steel or cast iron. Those expressed a large value of thrust force, principal force, and feed force. (6) From the viewpoint of high efficient cutting found within this research, a proper cutting speed was 15 m/min and a proper feed rate was 0.1 mm/rev. In this case, it was found that the tool life of a PCD tool was limited to a distance of approximately 230 m. (7) When the depth of cut was 0.1 mm, there was no influence of the feed rate on the feed force. The feed force tended to decrease, as the cutting distance was long, because the tool was worn and the tool edge retreated. (8) The main tool wear of a PCD tool in this research was due to the flank wear within the maximum value of $V_{max}$ being about 260 $\mu\textrm{m}$.

LNG운반선의 화물 누출 시 함침된 고분자 폼의 기계적 성능에 관한 연구 (A study on the mechanical performance of impregnated polymer foam in cargo leakage of LNG carrier)

  • 박기범;김태욱;김슬기;이제명
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제41권4호
    • /
    • pp.345-352
    • /
    • 2017
  • 본 연구에서는 액화천연가스(Liquefied natural gas, LNG) 운반선 화물창 손상으로 인한 극저온 LNG 누출 및 하중 작용 시 화물창의 초저온 보냉재를 구성하고 있는 고분자 폼(Polymer foam) 소재의 성능을 관찰하고자 하였다. LNG와 맞닿아 있는 LNG 운반선 1차 방벽은 유체 충격하중이나 오랜 시간 동안의 LNG 적재/하역으로 인해 손상이 누적 되면 누출로 이어지게 된다. 극저온 유체의 누출은 다공성 밀폐 셀 구조인 고분자 폼 내부에 영향을 끼쳐 작용 하중에 대한 거동변화를 야기한다. 본 연구에서는 단열재(Insulation)로 사용되는 고분자 소재인 폴리이소시아누레이트 폼(Polyisocyanurate foam, PIF) 시험편의 기계적 성능에 대한 평가를 수행하였다. 시험편에 극저온 액체를 함침시켜 압축실험을 진행함으로써 저온 취성(Cold brittleness)으로 인한 성능 변화와 함께 극저온 유체의 함침 영향에 대해 정량적으로 비교분석 하였다.

우리나라 여성복식의 변화에 미친 요인 연구 - 1945~1960년을 중심으로 - (A Study on the factors of Change in the Korean Dress and Personal Adornments)

  • 박길순
    • 복식문화연구
    • /
    • 제1권1호
    • /
    • pp.33-68
    • /
    • 1993
  • The purpose of this paper is to survey the influence of the culture change on the dress and personal adornments, and to survey the change of factors from the August 15. 1945 to 1960, in connection with the social and cultural background, applying B. Malinowski′s "Theory of Culture Change" which means an acculturation is the change′s elements of the dress and its ornaments. It is remarkable that the dress and personal adornments of Korean women after August 15, 1945 has great change from the traditional dress of the thousands years. Through the Liveration on August 15, 1945, American military government and the establishment of the Korean government, American democracy has brought many changes on Korean society. Advancement of education, an society with developed economic life, and introduction of scientific skill have influenced on the women′s way of thinking and a style of behavior and the view of value. The acculturation, the supply of mass communication, introduction of new institution and the reorganization of the old institution, the change of the economic situation, the change of the educational system, the change of the point of value, the development of scientific skill have greatly influenced on the dress and personal adornments. Modern dress and personal adornments of Korean women has the following developing procedure. The Liberation from Japan on the 15th, of August, 1945, the stationing of American Soldiers during hte Koran War, returning of the oversea′s brethern, and the mass communication have the direct and indirect contact with western civilization, and bring the occasion of development of the modern dress of Korean women. The increase of mass communication, such as radio, TV, newspaper, magazines and the frequent fashion shows showed fine design and practical western style dress to the women. This was the real beginning of the western style dress in Korea. By the increase of employment and the improvement of the economic situation, the consumption of clothing and the adornments was increased, so that a wide variety of fashions was set, and numerous kind and form of dress came in. As the increase of the number of women students, their practical and free dress life demanded western style dress. After the Liberation from Japan, the open-door policy of sex, public morals and traditional ethics became lax, and in this disordered society, indecent expose of the body was common. By the different kind of technological development, the form, fabrics, colors and patterns in clothes were much influenced and the hair style, make up, shoes and adornments were much influenced too. As shown above, the change of the dress has the same connection with that of society and culture. This shows that the dress and personal adornments represent clearly the cultural phenomenon of the society and cultural change of the society.

  • PDF

이산화탄소 분리를 위한 순환식 중공사 막흡수기에 관한 모델링 연구 (Modeling Study on a Circulatory Hollow-Fiber Membrane Absorber for $CO_{2}$ Separation)

  • Chun, Myung-Suk;Lee, Kew-Ho
    • 멤브레인
    • /
    • 제5권1호
    • /
    • pp.35-43
    • /
    • 1995
  • 이산화탄소를 포함하는 기체혼합물의 분리를 위해 액체막을 기반으로 하여 관련된 많은 연구가 시도되어 왔다. 폐가스로부터 이산화탄소를 분리하기 위해 본 연구에서는, 흡수제(absorbent)가 흡수(absoption)모듈과 전공조작식 탈착(desorption)모듈간을 계속 순환하는, 보다 개선된 형식의 순환식 중공사 막흡수기(circulatory HFMA)를 새로이 구성하고 분리성능에 관한 기초적인 해석을 하였다. 기-액 물질전달 모델식에 수치해를 적용하여 중공사 막 내부에서의 액상에 대한 농도분포를 정량적으로 예측하였고, 순환하는 흡수제의 유속에 따른 투과플럭스와 선택도의 변화거동을 살펴보았다. $CO_{2}/N_{2}$ 원료혼합기체와 흡수제로서 반응이 없는 순수(pure water)에 대해 계산을 수행하였다. 결과로 흡수제의 유량이 증가함에 따라 투과플럭스는 증가하는 반면에 종전 방식에 비해 졸은 값을 나타낸 선택도의 경우는 점차 감소하였다. 한편 투과플럭스는 진공조작변수인 탈착모듈에서의 기상압력($p_{4}$)에 크게 좌우됨을 보았다. 기존의 평판형 막모듈과의 비교로부터 예상했던 바와 같이 본 연구에서의 중공사 막모듈이 우수한 투과율을 나타냄을 확인할 수 있었다. Circulatory HFMA의 실제 설계를 위한 기초해석이 본 연구가 갖는 의의이다.

  • PDF

QCM(Quartz Crystal Microbalance)을 이용한 Betaine 양쪽성 계면활성제의 등전점 측정 (Measurement of Isoelectric Point of Betaine Zwitterionic Surfactant by QCM(Quartz Crystal Microbalance))

  • 김지성;박준석;임종주
    • Korean Chemical Engineering Research
    • /
    • 제47권1호
    • /
    • pp.31-37
    • /
    • 2009
  • 양쪽성 계면활성제는 등전점 이하의 pH 조건에서 양이온 계면활성제로 작용함으로써 유연력을 나타낼 수 있으며, 등전점 이상의 pH 조건에서는 음이온 혹은 비이온 계면활성제로 작용하여 세정력을 나타낼 수 있다. 따라서 pH에 따른 양쪽성 계면활성제의 특성을 활용하면 한 종류의 계면활성제 분자로 세정력과 유연력을 동시에 발휘할 수 있다. 본 연구에서는 betaine 양쪽성 계면활성제에 대하여 계면활성제의 기본적인 물성(CMC, 표면장력, 계면장력, 접촉각, 점도, 계면활성제 시스템의 상거동 등)을 측정하였으며, 또한 계면활성제 수용액에 대하여 QCM(quartz crystal microbalance) 실험과 zeta potential 측정을 통하여 양쪽성 계면활성제가 양이온 계면활성제에서 음이온 계면활성제로 작용이 전환되는 등전점을 결정하였다. Betaine 계면활성제의 CMC는 약 $10^{-4}mol/L$ 이며, CMC에서의 표면장력은 약 32 mN/m이었다. Spinning drop tensiometer를 사용하여 1 wt% 계면활성제 수용액과 n-decane 오일 사이의 계면장력을 pH 2~10의 조건에서 측정한 결과, 계면장력은 pH 5까지 증가하다가 그 이후 감소하는 경향을 보였으며, 평형에 도달하는 시간도 유사한 경향을 나타내었다. 본 연구에서 사용한 betaine 양쪽성 계면활성제의 등전점을 QCM 실험을 통하여 측정한 결과, 등전점은 pH 3.0~3.3에 존재하였으며, 이 결과는 zeta potential 측정 결과와 동일함을 확인하였다.

사질토(砂質土) 위에 놓인 강성(剛性) 원형기초(圓形基礎)의 수직진동(垂直振動) (Vertical Vibration of Rigid Circular Footings on Sand)

  • 김수일;민덕기
    • 대한토목학회논문집
    • /
    • 제5권3호
    • /
    • pp.127-136
    • /
    • 1985
  • 본(本) 연구(硏究)에서는 접지압분포(接地壓分布)를 포물선(抛物線)으로 가정(假定)한 기계기초(機械基礎)에 수직(垂直) 정규진동(正規振動) 하중(荷重)이 가(加)해질 경우의 진동(振動) 거동(擧動)을 해석(解析)할 수 있는 질량(質量)-스프링-감쇠(感衰)의 일자유도(一自由度)인 단순화 된 애널로그는(analog)를 제안(提案)하였다. 본(本) 연구(硏究)에서 제안(提案)된 애널로그는 탄성(彈性) 반무한체(半無限體) 이론(理論)과 잘 일치(一致)하였다. 또한 본(本) 애널로그는 모형(模型) 콘크리트 기초(基礎)의 수직(垂直) 진동(振動) 실험(實驗)을 통(通)하여 실험치(實驗値)와 비교(比較)하였다. 진동(振動) 실험(實驗)에서 모형(模型) 기초(基礎)는 질량비(質量比)가 각각(各各) 다른 11 개(個)의 원형(圓形) 기초(基礎)를 사용(使用)하였으며 실험(實驗) 지반(地盤)은 모래로 성토(盛土)하여 사용(使用)하였다. 본(本) 실험(實驗)에서 진동(振動) 하중(荷重)은 일정(一定) 진폭(振幅)의 진동(振動) 재하(載荷) 장치(裝置)를 사용(使用)하였으며 진동(振動) 실험(實驗)의 주파수(周波數) 범위는 30~100 Hz 이었다. 실험(實驗) 결과(結果) 공진주파수(共振周波數)는 이론치(理論値)와 잘 부합하였으나 이론(理論) 공진변위(共振變位)와 실측(實測) 공진변위(共振變位)의 비(比)는 0.5~1.7 사이에서 변화(變化)됨을 알 수 있었다. 또한 하중(荷重)이 증가(增加)됨에 따라 공진주파수(共振周波數)는 약간 감소(減小)하며 공진변위(共振變位)는 약간 증가(增加)함을 알 수 있었다.

  • PDF

적재설비 안정성 확보를 위한 FE 해석 기반의 연결부 모델 개발 (Development of Connection Model based on FE Analysis to Ensure Stability of Steel Storage Racks)

  • 허광희;김충길;유달리;전종수;이진옥
    • 대한토목학회논문집
    • /
    • 제38권2호
    • /
    • pp.349-356
    • /
    • 2018
  • 본 논문은 국내에서 연구가 미진한 적재설비의 지진 취약도 평가에 적용할 수 있는 FE 해석 기반의 연결부 모델을 개발하는데 목적이 있다. 이러한 목표를 달성하기 위하여, 적재설비 거동을 파악하기 위한 진동대 실험과 Modal Test, 그리고 구성 부재를 대상으로 한 다양한 부재실험(8가지 Push-over Test)을 진행하였다. 실험결과를 바탕으로 지진취약도 평가에 적용하기 위한 적재설비의 연결부 모델을 개발하기 위하여, NX-Nastran 프로그램을 활용하여 연결부의 상세 모델링을 진행하였다. 특히, 단순 걸쇠 방식으로 연결되는 기둥 부재와 보 부재의 연결을 모사하기 위하여 면대면 표면접촉 요소와 스프링 요소를 적용하였으며, 스프링 요소의 모델은 ARX (Auto Regressive eXogenous) 기반의 수학적 모델을 개발하여 적용하였다. FE 모델 기반의 simulation 결과는 부재 실험 결과와 비교하였을 때, 상호 오차율 8% 미만의 우수한 신뢰도를 보여주었다. 결과적으로 연구에서 개발한 FE해석 기반의 연결부 모델은 적재설비의 지진 취약도 평가를 위한 해석 모델에 활용될 수 있음을 확인하였다.

치과종사자의 손 위생 신념 및 손 위생 활동과 손 위생 수행률의 관련성 (Correlation between belief in the importance of hand hygiene, related activities and performance among dental staff)

  • 정주희;노희진;유자혜;문소정
    • 한국치위생학회지
    • /
    • 제17권2호
    • /
    • pp.247-258
    • /
    • 2017
  • Objectives: This study was conducted to identify the correlation between belief in hand hygiene, activities and related hand hygiene performance rates among dental staff. Methods: This study was based on the evaluation of 329 dental practitioners, including dental hygienists who work at dental clinics, dental hospitals, general and university dental hospitals in Seoul, Gyeonggi-do Province, and Incheon. The questionnaire consisted of a total of 46 questions, including 7 questions on general characteristics, and 25 questions on hand hygiene beliefs, and 5 questions on hand hygiene activities, and 9 questions on hand hygiene practices. This study used 291 subjects for the final analysis, excluding subjects who had provided incomplete or inappropriate responses to the questionnaire. The collected data were analyzed using an independent t-test, ANOVA, $x^2$ test, correlation analysis, and multiple linear regression analysis, where p-values of <0.05 were considered statistically significant. Results: Longer clinical career was associated with a significant increase in behavior and norm beliefs, but no sequential difference in control beliefs. The hand hygiene performance was higher in staff at larger hospitals after contact with pollutants and contaminated environments. Higher age was associated with a significant increase in hand hygiene performance rates, but profession was not statistically significant in the performance rate of hand hygiene. The hand hygiene performance rate was ranked higher among those with average work hours per week of greater than 8 hours followed by those who worked fewer than 8 hours. Fewer work hours per week, a stronger belief in hand hygiene, less frequent exposure to contaminated environments, and a greater number of hand hygiene performance had a positive effect on higher hand hygiene performance rates. Conclusions: In order to increase the hand hygiene performance rate of dental practitioners, it is considered that required time for hand washing should be ensured sufficiently. Proper usage of hand sanitizers should also be promoted efficiently.

복합스터드의 압축 좌굴 거동 (Behavior of Hybrid Stud under Compressive Load)

  • 이상섭;배규웅
    • 한국강구조학회 논문집
    • /
    • 제16권5호통권72호
    • /
    • pp.609-619
    • /
    • 2004
  • 유럽을 중심으로 스틸스터드의 약점으로 지목 받고 있는 열교현상을 억제하기 위한 스터드 개선 연구가 활발히 진행되고 있다. 이 연구는 크게 마감재와 접촉 면적을 줄이는 방법, 웨브면에서 열전달 경로를 늘이는 방법, 열전도성이 낮은 소재를 사용하는 방법, 그리고 스터드를 피복하는 방법으로 구분할 수 있다. 비교적 저층의 주거용 건축물을 대상으로 하는 국외의 경우 에너지 소비에 초점이 맞춰져 있지만, 본 연구의 경우 중층화를 대비하여 구조적 성능도 고려하여 아연도금강판(SGC58)과 FRP를 에폭시로 부착하여 150SL 형태의 복합스터드를 개발하였다. 복합스터드의 소재로는 두께 1.0mm과 1.2mm 강판과 두께 4mm(4ply), 6mm(6ply)의 FRP를 적용하였고, 4가지의 접합 상세에 대한 제작 및 실험을 통해 최종적으로 우수한 결과를 보인 2가지를 선택하였다. 이와 같은 과정을 거쳐 개발된 복합스터드의 압축 성능을 확인하기 위해 2가지 접합 상세에 대해 단면 높이인 150mm에 대해 3, 6, 9, 12배 길이에 대해 압축 실험을 계획하였고, 기존 스틸 스터드와 비교하기 위하여 동일 형태의 비교 실험체도 제작하였다. 실험결과, 복합스터드의 최대하중은 강판 두께 1.0mm인 경우 동일 두께의 스틸 스터드보다 평균 1.62배, 1.2mm인 경우 평균 1.46배 증가하였으며, 가력 종료 시점에 이르기까지 일체 거동을 보여 구조적으로 우수함이 입증되었다.

고온차단 기밀용 그라파이트의 고온 미끄럼마모 특성 평가 (Sliding Wear Properties of Graphite as Sealing Materials for Cut off Hot Gas)

  • 김연욱;김재훈;양호영;박성한;이환규;김범근;이성범;곽재수
    • 대한기계학회논문집A
    • /
    • 제37권11호
    • /
    • pp.1349-1354
    • /
    • 2013
  • 고온의 가스유로를 조절하는 개폐식(On-Off)밸브의 구동축과 라이너 사이에 위치하여 구동장치로의 고온 가스유입을 방지하는 기밀 소재에 대하여 연구하였다. 기밀 소재로 사용된 그라파이트(Graphite)는 구동장치에 의한 구동축의 지속적인 움직임으로 인해 마모가 발생한다. 본 논문은 고온가스 조절 밸브 내의 기밀 소재로 사용된 그라파이트(Graphite, HK-6)에 대한 상 고온 마모 특성을 평가하였다. 구동축의 소재인 레늄합금(W-25Re)에 대하여 그라파이트의 마모 시험을 수행하고 마찰계수와 비마모율을 비교하였다. 상온과 실제 작동 환경인 고온 $485^{\circ}C$에서 미끄럼속도와 접촉하중의 변화에 따른 마찰계수와 비마모율을 평가하였다. 마모표면의 SEM 분석을 통하여 상 고온 마모표면에 관찰되는 third body 를 확인하고 이로 인한 윤활효과를 고찰하였다.