• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1990년도 특별강연 및 춘계학술발표 개요집
• /
• pp.135-136
• /
• 1990

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2003년도 추계학술발표대회 개요집
• /
• pp.248-249
• /
• 2003

• Journal of Welding and Joining
• /
• 제28권2호
• /
• pp.5-12
• /
• 2010

• Journal of Welding and Joining
• /
• 제28권6호
• /
• pp.63-69
• /
• 2010

The pre-heat free consumables for GMAW, SAW and FCAW processes that matche with the Cu-bearing PFS-700 steel which has yield strength over 700MPa were developed and evaluated to see the suitability in military such as submarine and battle ship. Explosion Bulge Test underwater was developed and applied to see the reliability of welded structure. All welding was conducted without pre-heat before welding, the interpass temperature was below $150^{\circ}C$ for all welding conditions. Tensile strength for the weld metal in GMAW, SAW and FCAW process is 887MPa, 875MPa and 813MPa, respectively, these values are similar to the base metal of PFS-700 steel of 838MPa. EBT results in GMAW, SAW and FCAW show 14.0%, 14.02% and 15.9% reduction of thickness without generation of crack, respectively and stand-off distance was set up properly to have over 14.0% reduction of thickness. Through EBT results, the developed new consumables are applicable to the weapon systems such as submarine and battle ship.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2010년도 춘계학술발표대회 초록집
• /
• pp.63-63
• /
• 2010

The pre-heat free consumables for GMAW, SAW and FCAW processes that matches the Cu-bearing PFS-700 steel which has yield strength over 700MPa were developed and evaluated to see the suitability in military such as submarine and battle ship. Explosion bulge test in underwater was developed and applied to see the reliability of welded structure. All welding was conducted without pre-heat before welding, the interpass temperature was below $150^{\circ}C$ for all welding conditions. Tensile strength for the weld metal in GMAW, SAW and FCAW process is 887MPa, 875MPa and 813MPa, respectively, these values are similar to the base metal of PFS-700 steel of 838MPa. EBT results in GMAW, SAW and FCAW show 14.0%, 14.02% and 15.9% reduction of thickness without generation of crack, respectively and stand-off distance was set up properly to have over 14.0% reduction of thickness. Through EBT results, the developed new consumables are applicable to the weapon systems such as submarine and battle ship.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.50-53
• /
• 2003

CMP (chemical mechanical polishing) process remained to solve several problems in deep sub-micron integrated circuit manufacturing process. especially consumables (polishing pad, backing film, slurry, pad conditioner), one of the most important components in the CMP system is the slurry. Among the composition of slurries (buffer solution, bulk solution, abrasive particle, oxidizer, inhibitor, suspension, antifoaming agent, dispersion agent), the abrasive particles are important in determining polish rate and planarization ability of a CMP process. However, the cost of abrasives is still very high. So, in order to reduce the high COO (cost of ownership) and COC (cost of consumables) in this paper, we have collected the silica abrasive powders by filtering after subsequent CMP process for the purpose of abrasive particle recycling. And then, we have studied the possibility of recycle of reused silica abrasive through the analysis of particle size and hardness. Also, we annealed the collected abrasive powders to promote the mechanical strength of reduced abrasion force. Finally, we compared the CMP characteristics between self-developed KOH-based silica abrasive slurry and original slurry. As our experimental results, we obtained the comparable removal rate and good planarity with commercial products. Consequently, we can expect the saving of high cost slurry.

• 한국산업정보학회논문지
• /
• 제27권6호
• /
• pp.59-68
• /
• 2022

우리는 자동차 소유자에게 자동차 소모품의 교체 주기를 알려주는 자동차 유지관리 지원 장치를 제안한다. 소모품 교체 주기를 놓친다면 차량의 상태가 악화되기 때문에 권장 기간 내에 소모품을 교체하는 것이 중요하다. 자동차 유지관리 지원 시스템은 설치된 차량의 주행 거리를 기준으로 차량 소유자가 정하는 교체 시간을 알려준다. 이 시스템은 On Board Diagnostics-II 포트에 노출된 Electronic Control Unit과 계기판 사이의 통신을 위해 Controller Area Network 인터페이스에서 획득한 속도 정보를 통합하여 차량 주행 거리를 계산한다. 이를 통해 시스템에 추가 배선이 필요하지 않다. 시스템의 주행 거리를 차량의 계기판과 비교하여 시스템의 오차가 0.28%에 불과하다는 것을 확인하였다. 자동차의 일반적인 조건으로는 무시할 수 있는 15mW를 소비하는 저전력 모드로 자동으로 진입해 점화 스위치가 꺼졌을 때 차량 배터리가 방전되는 것을 방지한다.

• Journal of Welding and Joining
• /
• 제28권3호
• /
• pp.23-26
• /
• 2010

• Journal of Welding and Joining
• /
• 제26권2호
• /
• pp.1-4
• /
• 2008

• Journal of Welding and Joining
• /
• 제30권5호
• /
• pp.4-8
• /
• 2012