• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1283-1288
• /
• 2009

In general steel sheet piles are used in the containment system, which are vertical barrier systems for waste disposal and landfill purposes, and roads in excavation for temporary structure. This paper presents case study of the use of an interlocking sheet pile for water and containment. Cut-off Z-type sheet pile joints are investigated to determine their permeability from the field test. Four different joint sealing materials are used in field test. The results showed joint permeability is significant time-dependent and joint-dependent. These are explored and conclusions on permeability characteristics of different sealants are noted. A case study gives a design example as well as suggestion on permeability and water tightness can be implemented in using the sheet pile barrier in civil and environment works. From the test results, the effective sealing programs of sheet pile interlocks are suggested.

• 한국강구조학회 논문집
• /
• 제21권6호
• /
• pp.647-657
• /
• 2009

본 연구는 강-프리스트레스 콘크리트(PSC) 혼합구조 보를 분절형 교량에 적용하기 위해 필수적으로 요구되는 이종 부재간의 연결에 대한 기초연구로써, 연결부 거동과 시공성을 향상시키기 위해 연결부 상․하부 플레이트에 perfobond rib 전단연결재를 설치한 강-PSC 연결부를 제안하였다. 제안된 연결부가 설치된 보 실험체들을 제작하여 하중재하실험을 통해 연결부의 성능을 확인한 결과, 모든 실험체에서 연결부의 파괴 없이 연결부 인접 PSC부에서 실험체의 파괴와 극한강도가 나타났다. 합성 작용에 의하여 실험체의 초기 강성은 우수한 것으로 나타났으며, 균열의 진전 형상도 전형적인 휨 균열 형상을 나타내었다. 또한, 기존 스터드를 적용한 실험체 이상의 강도를 얻을 수 있는 것으로 나타났다. 그러므로 제안된 연결부는 혼합구조 연결부에 효과적으로 적용 가능하다고 판단된다.

• Steel and Composite Structures
• /
• 제23권5호
• /
• pp.585-596
• /
• 2017

Tubular joints have been widely used in offshore platforms and space structures due to their merits such as easy fabrication, aesthetic appearance and better static strength. For existing tubular joints, a grouted sleeve reinforced method was proposed in this paper. Experimental tests on five tubular T-joints reinforced with the grouted sleeve and two conventional tubular T-joints were conducted to investigate their mechanical behaviour. A constant axial compressive force was applied to the chord end to simulate the compressive state of the chord member during the tests. Then an axial compressive force was applied to the top end of the brace member until the collapse of the joint specimens occurred. The parameters investigated herein were the grout thickness, the sleeve length coefficient and the sleeve construction method. The failure mode, ultimate load, initial stiffness and deformability of these joint specimens were discussed. It was found that: (1) The grouted sleeve could change the failure mode of tubular T-joints. (2) The grouted sleeve was observed to provide strength enhancement up to 154.3%~172.7% for the corresponding un-reinforced joint. (3) The initial stiffness and deformability were also greatly improved by the grouted sleeve. (4) The sleeve length coefficient was a key parameter for the improved effect of the grouted sleeve reinforced method.

• Advances in concrete construction
• /
• 제9권2호
• /
• pp.115-123
• /
• 2020

The performance of steel fiber reinforced geopolymer concrete beam column joints under cyclic loading was investigated. The volume fraction of fibers considered were 0.25% (19.62 kg/㎥), 0.5% (39.24 kg/㎥), 0.75% (58.86 kg/㎥) and 1% (78.48 kg/㎥). A total of fifteen specimens were prepared and tested under reverse cyclic loading. Test results were analyzed with respect to first crack load, ultimate load, energy absorption capacity, energy dissipation capacity, stiffness degradation and load deflection behavior. Test results revealed that the addition of steel fibers enhanced the performance of geopolymer concrete beam column joints significantly. The joints were analyzed using finite element software ANSYS. The analytical results were found to compare satisfactorily with the experimental values.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(I)
• /
• pp.447-450
• /
• 2005

A prefabricated composite hollow slab with perforated I-beams was suggested for the replacement of deteriorated concrete decks or the construction of new composite bridges with long-span slabs. Composite slabs with embedded I-beams have considerably higher stiffness and strength. For the application of prefabricated composite slabs to bridges, joints between slabs should satisfy the requirements of the ultimate limit state and the serviceability limit state. In this paper, three types of the detail for loop joints were selected and their structural performance in terms of strength and crack control was investigated through static tests on continuous composite slabs. A main parameter was the detail of the joint, such as an ordinary loop joint and loop joint with additional reinforcements. Even though there was no connection of the steel beams at the joints, the loop joints showed good performance in terms of strength. In terms of crack control, the loop joint with additional reinforcements showed better performance. In ultimate limit state, the continuous composite slabs showed good moment redistribution and ductility.

• Corrosion Science and Technology
• /
• 제6권2호
• /
• pp.74-76
• /
• 2007

The increasing interest in the corrosion properties of weld joints in the corrosive environment is placing stringent demands on the manufacturing techniques and performance requirements, and the manufacture employs the high quality and efficiency welding process to produce welds. Welding plays an important role in the fabrication of chemical plants, nuclear power plant, ship construction, and this has led to an increasing attention to the corrosion resistant weld joints. This paper covers a recent technical trends of welding technologies for corrosion resistance properties including the COMPENDEX DB analysis of welding materials, welding process, and welding fabrications.

• 한국정밀공학회지
• /
• 제15권9호
• /
• pp.158-166
• /
• 1998

This paper presents a geometrical approach to the characteristic analysis of parallel mechanism with free joints intended for use as a planar task robot. Solution of the forward and inverse kinematic problems are described. Because the mechanism has only three degree-of-freedom output, constraint equations must be generated to describe the inter-relationship between actuated joints and free joints so as to describe the position and orientation of the moving platform. Once these constraints are incorporated into the kinematics model, a constrained Jacobian matrix is obtained. and it is used for the solution of the forward kinematic equations by Newton-Raphson technique. Another Jacobian matrix was derived to describe the interrelationship between actuated joints and moving platform. The stiffness, velocity transmission ratio, force transmission ratio and dexterity of the mechanism are then determined based on this another Jacobian matrix. The geometrical construction of the mechanism for the best performance was investigated using the characteristic analysis.

• 한국강구조학회 논문집
• /
• 제22권2호
• /
• pp.161-171
• /
• 2010

교량은 재료의 발달과 신형식의 개발로 많은 발전을 이루어 왔으나, 현장에서 거의 모든 작업 공정이 이루어진다는 기본 틀을 탈피하지 못하고 있다. 급속 시공 건설 기술은 현재 세계적으로 그 효용성이 증가하게 되어 현재 국내 외적으로 조립식 교량에 대한 연구가 활발하게 진행되고 있다. 하지만, 상부구조와 비교하여 하부구조의 경우에는 연구 및 시공 실적이 매우 미미한 실정이다. 본 연구에서는 조립식 내부 구속 중공 CFT 교각에 대해서 대략적으로 설명하고, 교각 세그먼트 접합부의 설계식을 제안하였으며 교각 세그먼트 접합부의 구성요소에 대한 매개변수 연구를 수행하였다.

• 한국강구조학회 논문집
• /
• 제21권3호
• /
• pp.211-219
• /
• 2009

비렌딜 트러스가 면내 휨모멘트 하중을 받는 지관 정방형의 각형강관 T형 접합부의 거동을 실험적으로 조사하기 위한 것이 본 논문의 목적이다. T형 접합부에서 각형강관 주관 플랜지면의 위에 각형강관 지관이 용접으로 접합되어 있다. 주요 변수로는 주관 두께에 대한 폭의 비($2{\gamma}$)로 ${16.7{\leq}2{\gamma}{\leq}33.3}$의 범위이고, 주관 폭에 대한 지관 폭의 비인 폭비($\beta$)로 ${0.40{\leq}{\beta}{\leq}0.71}$이다. 접합부에 면내 휨모멘트 하중이 작용하도록 총 9개의 실험체를 제작하여 실험하였다. 실험결과, 각형강관 지관 정방형의 T형 접합부에 대한 면내 휨강도는 주관 폭두께비와 폭비에 관계없이 주관 플랜지 휨변형에 의해 결정됨을 알 수 있다. 또한, 지관 정방형의 각형강관 T형 접합부의 면내 휨강도는 사용성에 의해 지배되는 것으로 나타나 면내 최대 휨강도는 1%B 변형시의 휨강도($M_{1%B}$)에 1.5배로 평가할 수 있는 것을 알 수 있다. 최종적으로 지관 정방형의 각형강관 T형 접합부에 대한 면내 휨강도는 주관의 폭두께비가 작을수록, 주관 폭에 대한 지관 폭의 비인 폭비가 클수록 접합부의 휨강도는 선형으로 증가하는 것으로 나타났다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.395-396
• /
• 2023

The current building structural standards present design requirements for the vertical construction joint of a slurry wall when it is used as a permanent wall. This paper proposes design methods and considerations according to the requirements of the relevant standards.