• 한국건축시공학회지
• /
• 제13권6호
• /
• pp.619-626
• /
• 2013

건설현장에서는 많은 사진이 촬영되나, 촬영된 사진들에 대한 6하원칙 정보가 효율적으로 관리되지 못하고 있다. 이로 인하여, 건설경험과 지식이 없는 경우에는 의사소통이 용이하지 않고, 이해관계자간의 협의, 분쟁, 시설물 유지관리, 다른 시설물 건설 등에 촬영된 사진정보가 활용되는데 한계가 있었다. 본 연구에서는 촬영된 사진과 6하원칙 정보가 결합된 벡터사진의 필요성을 제기하고, 벡터사진 생성 및 서버저장 모듈의 프로토타입을 개발하였다. 촬영된 벡터사진은 실시간으로 서버에 저장되고, 6하원칙정보에 의해 DB 시스템에서 효율적으로 관리될 수 있다. 향후 벡터사진과 BIM모델을 연계하는 시스템을 개발하면, 사진 속의 벡터정보를 BIM모델의 객체 속성정보와 연결시킬 수 있게 되어, 벡터사진은 더욱 다양한 용도로 활용될 수 있을 것으로 기대된다.

• 한국건설관리학회논문집
• /
• 제2권4호
• /
• pp.99-106
• /
• 2001

건설현장은 전산업 근로자의 $10{\%}$ 미만인 근로자가 전산업 재해의 $30{\%}$를 차지하는 재해다발 업종으로 중대재해 사고가 매우 심각하다. 이는 건설업 자체의 특수성과 내재되어 있는 작업의 위험성 및 이에 대한 안전대책등의 정보가 부족하기 때문이라 생각되며, 건설업에서의 재해예방을 위한 업무는 교육, 훈련, 정보의 단기적인 접근과 장기적인 접근을 요구한다. 건설현장에서의 기존의 사고사례는 건설공정에 따른 위험 위해 요소 등 본 작업에 관련한 모든 정보가 함축되어 있으므로 각 개별적인 사건에 대한 조사의 정보가 잘 이루어진다면 건설현장의 사고예방에 있어서 필요한 정보를 제공하게 되므로 재해발생방지 측면에서 매우 유용하리라 판단된다. 이와 같은 관점에서 본 연구는 한국산업안전공단에 의해 조사된 $1992{\~}2000$년간의 빌딩과 APT를 대상으로 중대재해의 860여건을 Data Base화하고 건설공정의 각 작업영역별로 안전정보(170건)를 제공하기 위하여 필요한 건설안전 정보시스템을 개발하는데 있다.

• 국제학술발표논문집
• /
• The 5th International Conference on Construction Engineering and Project Management
• /
• pp.274-278
• /
• 2013

Over the past several years, the building codes that govern commercial building construction have become increasingly prescriptive in nature, specifying detailed information related to the design and installation of the systems, while offering no reasoning behind their prescriptive measures. For example, metal stud framing is commonly used in commercial building construction to create bearing walls and non-bearing partition walls. BIM provides a powerful platform for developing and implementing "pre-planning" tools and methods to facilitate both engineering and administrative controls during construction. This paper discusses the use of BIM to enhance constructability for commercial building construction activities, specifically metal stud framing. Using specific real-world examples this paper demonstrates ways that BIM can be used to foresee potential construction issues and motivates and informs future uses of BIM technologies

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.183-184
• /
• 2017

Some of the information created during the design phase of an New NPP life cycle is useful only for the execution of the construction phase; however, much of the information greatly impacts the longer-term operational phase. To most make use of design and construction information produced by data based design system during the construction and operation phase, This research is identified controlled data and drawn design information of controlled equipment from documents generated during the life-cycle stages. This study aimed to analyze related documents to assure traceability of controlled equipment from design phase through O&M and then suggested DB(Data Base) based control method on technical information of major equipment throughout nuclear power plant lifecycle.

• 한국지반공학회지:지반
• /
• 제26권9호
• /
• pp.33-47
• /
• 2010

Underground constructions continue to provide challenges to Geotechnical Engineers yet they pose the best opportunities for development and deployment of advance technologies for analysis, design and construction. The reason for this is that, by virtue of the nature of underground constructions, more data and information on ground characteristics and response become available as the construction progresses. However, due to several barriers, these data and information are rarely, if ever, utilized to modify and improve project design and construction during the construction stage. To enable the use of evolving realtime data and information, and adaptively modify and improve design and construction, the paper presents an analysis and design system, called AMADEUS, for underground projects. AMADEUS stands for Adaptive, real-time and geologic Mapping, Analysis and Design of Underground Space. AMADEUS relies on recent advances in IT (Information Technology), particularly in digital imaging, data management, visualization and computation to significantly improve analysis, design and construction of underground projects. Using IT and remote sensors, real-time data on geology and excavation response are gathered during the construction using non-intrusive techniques which do not require expensive and time-consuming monitoring. The real-time data are then used to update geological and geomechanical models of the excavation, and to determine the optimal, construction sequences and stages, and structural support. Virtual environment (VE) systems are employed to allow virtual walk-throughs inside an excavation, observe geologic conditions, perform virtual construction operations, and investigate stability of the excavation via computer simulation to steer the next stages of construction.

• 한국BIM학회 논문집
• /
• 제12권2호
• /
• pp.26-39
• /
• 2022

The purpose of this study is to establish a novel system for on-site management of construction and demolition waste. Construction waste has always been one of largest waste in the world and has long lacked an effective management system. Although various countries have planned the disposal of waste at the political level, the real-time and effective management of construction sites has not been mentioned. Especially in China, the continuous development of the construction industry also generates a large amount of waste, and China is not prepared for a large amount of construction waste. In order to alleviate the huge impact of construction waste on society and the environment, this study proposes a waste management method that combines Building Information Modeling technology and Radio Frequency Identification technology. Through this research, by using information technology to manage the generation and discharge of construction waste, and record the amount and information of waste generation, also improve the management method of construction waste.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.195-199
• /
• 2015

Many conventional management methods have emphasized the minimization of required resources along the supply chain. Accordingly, this paper presents a proposed method called the Virtual Design and Construction (VDC)-aided system. It is based on object-oriented resource control, in order to accomplish a feed-forward control monitoring supply chain logistics. The system is supported by two main parts: (1) IT-based Technologies; and (2) VDC Models. They enable the system to convey proactive information from the detection technology to its linked visualization. The paper includes a field study as the system's pre-test: the Scaffolding Works in a LNG Mega Project. The study demonstrates a system of real-time productivity monitoring by use of the RFIDbased Mobile Information Hub. The on-line 'productivity dashboard' provides an opportunity to display the continuing processes for each work-package. This research project offers the observed opportunities created by the developed system. Future work will entail research experiments aimed towards system validation.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 추계 학술논문 발표대회
• /
• pp.189-190
• /
• 2011

The purpose of this study is to suggest the development direction for vendor management in plant construction. Therefore this research has proposed the integration management of vendor and information standardization. This research has proposed that plant industry association manage the basic information of vendor. And each company manage the performance evaluation of vendor's firm. Expecially, vendor management system should be developed by ISO information system.

• 한국건축시공학회지
• /
• 제3권4호
• /
• pp.95-102
• /
• 2003

A construction project's period is limited by the order manufacture. And a construction project is requested a specific place, and has the characteristic to be irregular. Today, construction is to be representative high-cost and low-efficiency. This kind of problems appears in small construction projects more often than large construction projects. According to this facts, we recognized necessity of making practical application in methods of construction management. Also, we suggest application and establishment of integrated responsibility management department, PMIS(Project Management Information System) and Data Base. From now on, methods of construction management could be good opportunities for small construction projects and local construction companies. Therefore, small and local construction companies should try to improve their abilities. Likewise, the countries systematize to constitute the relation laws.

• 한국건설관리학회논문집
• /
• 제15권5호
• /
• pp.115-126
• /
• 2014

건설 프로젝트에서의 정보관리를 위해 PMIS와 같은 IT기반 서비스들이 활용되고 있지만 실제 현장에서는 발생 정보에 대한 신속한 대처 및 정보손실, 보안위험 등의 문제를 해결해 주지 못하고 있다. 따라서 본 연구는 최근 기업 내 참여와 정보공유의 목적으로 사용되고 있는 SNS를 건설현장에 도입하고 이를 활용한 건설 정보 관리 체계를 제안하였다. 이를 위해 문헌 고찰과 현장 인터뷰를 통해 요구사항을 분석하고 활용 전략을 수립하여 시스템을 개발하였으며 실제 현장에서의 정보관리 체계 구축 가능성 여부를 위해 성능 테스트를 실시하여, 개발 결과물 및 이를 활용한 정보 관리 체계가 건설 현장에서 효율적인 정보 관리에 도움을 줄 수 있다는 것을 검증하였다.