• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 춘계학술대회 논문집
• /
• pp.242-243
• /
• 2010

The cooling system, including a fan is a one of the major sources to generate the radiated noise of construction equipment. Therefore, it is required to reduce the flow noise induced by a fan in order to reduce the noise level. In this study, we made an engine room model to carry out a variety of experiments. And then, the flow noise analysis technique using the CFD code was applied to the cooling system of construction equipment. These analyses results agree well with the measurement results. These results make it possible to understand the flow noise characteristics and to design the low noise cooling system in the design stage.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.509-513
• /
• 2013

There are so many types of construction equipment. Excavator is one of typical construction equipment which is working under the tough and severe environments. It's important for engineers to design CE components by the vibration durability point of view. Traditionally, two typical vibration durability methods to verify the durability of components. The first is experimental method which is using the vibration durability test bench. But experimental approach on vibration durability is needed a lot of cost and time. The second is analytical method which is using the vibration durability analysis such as Dirlik, Stainberg, Lalanne and others methodologies. The one of main advantages on vibration durability analysis can reduce the cost and time. We present a vibration durability analysis process and methodology on the guardrail system in excavator.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.947-952
• /
• 2005

Nowadays, dependency upon the construction equipment is getting bigger and the mass of equipment cost is increase, those are indirect evidence of important of equipment. But construction field has the characteristic that is the various activities and wide work area. These make many problems in the operating of equipments. These problems bring about diminution of workability and productivity, in result it makes increase of cost and time. Owing to solve the problems, this study introduce of Telematics technique. This study analyzes process into its work and management for construction equipment using at the land work, and will apply Telematics to the field equipments.

• 드라이브 ㆍ 컨트롤
• /
• 제19권4호
• /
• pp.70-76
• /
• 2022

In this paper, we develops an unmanned test system for the purpose of realizing an actual forklift-based test-bed for the operation durability of the forklift mast. First, two robot actuators were applied to the lever to replace lever manipulation of the operator. For detecting the height of the fork and the tilt angle of the mast, the laser displacement sensor and the inclinometer were installed to the forklift. Next, the embedded control system was used to control the robot actuator with reference to test mode. Experimental evaluation verified that developed test system was effective and practical for the viewpoint of the repeatability of the test mode.

• 드라이브 ㆍ 컨트롤
• /
• 제19권4호
• /
• pp.77-84
• /
• 2022

The aims of this study was to estimate transfer force delivered to cone crusher housing and contribution of force transmission. The rock crushing condition caused vibrations in the cone crusher housing, which were experimentally measured, and frequency response functions (FRF) were also found through modal impact tests. Vibration data and frequency response functions were applied to the transfer path analysis (TPA) model. Next, transfer forces delivered to the cone crusher housing were quantified via the TPA method. Contribution of force transfer was also analyzed based on force estimation results. Finally, this study describes basic concepts and components of the TPA method and reviews its applicability to rotating machinery that experiences impact vibrations and forces.

• 드라이브 ㆍ 컨트롤
• /
• 제19권3호
• /
• pp.47-52
• /
• 2022

The C-ITS (Cooperative-intelligent Transport System) is a driver assistance system that prevents car accidents and enhances traffic conditions, via sharing traffic information between vehicles and roadway infrastructures. A CLAS (changing lane assistance system) for unprotected left-turn, is a C-ITS that assists a driver with safely changing lanes. This system addresses a driver's critical gap, that enables the system to express a driver's uncertainty. A driver's critical gap is a time that can be used in a threshold, to change a lane or not. Unfortunately, a driver's critical gap is difficult to use in a CLAS directly. This paper addresses a driver's critical gap, and how it can be applied in a CLAS for an unprotected left-turn.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 가을 학술논문 발표대회
• /
• pp.4-5
• /
• 2020

Pipe support is a representative structure that supports slab formwork, and it is a representative temporary equipment that has been systematically managed since the 1990s when the domestic temporary equipment performance test system was introduced. Nevertheless, it is also a reality that many of the products in circulation are used products that are reused and do not meet the performance of the initial manufacturing stage. However, if only new products are insisted, it could lead to delays in the process due to an increase in construction costs and difficulties in timely delivery. On the contrary, it is not acceptable for the safety of the construction site to use products of low quality without verification procedures or standards. Therefore, this study attempts to grasp the management system such as safety certification for temporary equipment and the actual condition of quality control to maintain performance, and propose improvement plans.

• 한국산학기술학회논문지
• /
• 제20권5호
• /
• pp.322-333
• /
• 2019

본 연구의 목적은 과거 14년간 한국 정부가 투자한 연구시설 장비의 구축정보를 기반으로 제조국가별로 기초 분석과학 분야의 연구시설 장비 구축 수와 구축금액 차이를 비교 분석하여 국산연구장비의 시장규모와 시장점유의 수준을 알아보고자 하였다. 2019년 1월 1일을 기준으로 2005년부터 2018년까지 국내에 구축되고, 기초 분석과학 분야에 활용되는 연구시설 장비(구축금액이 3천만원 이상인 주장비 기준) 20,687점의 구성, 장비표준분류, 구축 수, 그리고 구축금액을 제조국가별로 분석하였다. 제조국가별 연구시설 장비 구축 수 차이를 비교 분석하기 위하여 단일표본 카이제곱검정 방법을, 구축금액 차이를 비교 분석하기 위하여 일요인 분산분석 방법과 본페로니 사후검정 분석을 사용하였다. 본 연구결과, 각 제조국가별로 연구시설 장비 구축 수(p<.001)와 구축금액(p<.05)은 통계학적으로 유의하게 차이가 있었으며 특히, 장비표준분류에 따라 국내 기업의 연구시설 장비 점유 규모가 통계학적으로 유의하게 상이하였다(p<.05). 따라서 기초 분석과학 분야에 대한 연구장비 국산화 정책 지원 시, 장비유형 및 구축금액별로 정부의 차별화된 전략과 함께 상이한 정책연구 기획이 필요할 것으로 사료된다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 동계학술발표대회 논문집
• /
• pp.316-321
• /
• 2007

It is difficult for a superintendent or an operator of building service systems and equipment to decide the reasonable time for management of himself due to the shortage of his specialty for repair or replacement of a part of or whole equipment. But The reliable life expectancies for various building service equipment have not been prepared yet. This study shows the difference of optimal economic life and the decrease of running cost and energy consumption according to management level of the building equipment by the LCC analysis. The numerical model for building HVAC system was composed and analyses were performed for several parameters with management.

• 드라이브 ㆍ 컨트롤
• /
• 제3권1호
• /
• pp.9-15
• /
• 2006