• Korean Journal of Construction Engineering and Management
• /
• v.11 no.2
• /
• pp.45-53
• /
• 2010

When increasing quantity of construction wastes, how to deal with construction wastes and environmental problems relating to disposal of construction wastes are discussed as social issues, treatment of construction waste and subsidiary issues are raised as important problems. The demolition work produce construction wastes most in construction industry. Various researches on eco-friendly treatment of construction wastes, recycling rates and recycled materials were conducted aspect of sustainability in developed countries, however, domestic remodeling projects were performed demolition work with first-demolition and second-classification method which emphasize productivity focused on efficiency. It caused not only environmental problems, but also economical problems such as increasing disposal cost of construction wastes. Solving these problems, the previous study, suggested the process model of eco-friendly demolition work to recycle materials. This paper applied eco-friendly remodeling process to practical projects and economic feasibility on eco-friendly remodeling process. Moreover these results expect to contribute the revitalization of eco-friendly demolition work in remodeling projects.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.03b
• /
• pp.536-541
• /
• 2000

In recent years there has been a steady increase in geoenvironmental engineering research where geotechnical engineering has been combined with environmental concerns in the field of construction and industrial waste reusing in civil works. Many of these projects involve some investigation on the characteristics of geotechnical and environmental properties. In this study, investigation and test on the characteristics of demolished waste concrete was carried out to detect the physical, mechanical, and environmental properties for reusing as embankment and backfill materials in civil works.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.544-549
• /
• 2009

Alongside the increasingly larger domestic construction projects is the gradual rise in construction waste. Consequently, serious environmental problems emerge. The increase in demand for housing remodeling due mainly to the increase in national income and improvement of quality of life is the main reason for the increase in construction waste. This study was conducted as the basic study for the prevention and reduction of construction waste generated by apartment remodeling; it aimed at identifying the remodeling items and reasons. Toward this end, this study targeted apartments at least 15 years old and conducted a questionnaire survey to determine the remodeled sections and remodeling reasons. As a result of the questionnaire survey, the bathroom, floor finishing, and kitchen furniture recorded the highest ratios in remodeling. Old materials, aesthetic motivation, and pleasant living space composition were cited as the major remodeling reasons. This study is significant as a basic study for generating environmental and economic profits through systematic waste management. Further studies should develop guidelines suitable for construction waste reduction and recycling in line with the construction and demolition phases in case of remodeling.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.6
• /
• pp.681-688
• /
• 2022

In this study, the process of drone photography, automatic volume calculation, total floor area conversion, and waste calculation was constructed as a QGIS plug-in to predict the demolition waste (DW) generated in an aged area where drawing information or building information is uncertain. Through a case study, the high consistency between the automatically calculated volume using the drone and the BIM volume based on the field measurement was confirmed. Field application was carried out for the planned demolition work site, and the consistency between the drone-based volume and the actual measurement-BIM-based volume was reconfirmed. The waste generation unit was applied and the amount of DW was calculated by setting the floor height and building type, and the entire process was completed within 6 hours. Although the difference between building information and building objects through drones occurred according to the setting of temporary structures, loads, and floor heights, it was found that the actual amount of DW was generated more than the initial estimate. It is expected that measures to improve the accuracy of volume and floor area conversion will be required through case studies in the future.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2004.11a
• /
• pp.634-637
• /
• 2004

Hereafter, the housing construction industry in a domestic country has to give more relative importance to the redevelopment and the rebuilding of existing housing rather then the housing supply methods by the development of new housing sites, and those tendencies are rapidly spreading out. Also, because apartment occupies $50\%$ over of the existing housing, its maintenance, repair, remodeling and reconstruction got to be necessary area for the slumming prevention of a residential area and the disaster prevention occurred by durability lowering of building. But, as having focused on the housing supply methods by the development of new housing sites, the domestic construction industry has relatively carelessly dealt with deconstruction areas including maintenance, remodeling, redevelopment and reconstruction of old existing housing. Therefore the process of the deconstruction is not well suited to regulations and related technology. This paper suggests the present situation of C&D production and new demolition process through comparative analysis of the present demolition works.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.6
• /
• pp.63-70
• /
• 2014

Deconstruction of the building must be applied firstly in order to improve recycling and reuse of construction wastes. In this study have done a case study for deconstruction of an apartment. All construction waste(CW) which will be generated during deconstruction was examined in each part of the building. Because drawing did not exist in most of the old building, we drew up floor plans of buildings. After analyzing these drawings, estimated quantities of CW. It was measured working time of labor and equipments for deconstruction and general demolition on each building of the apartment. In addition, it was proposed in the volume and weight per unit after analyzing detailed measurement of CW which was generated in the process of deconstruction and traditional demolition. It suggested recovery rate at a site, volume and weight conversion factors, and waste basic unit per area that based on the results of comparative analysis on the amount of CW which is calculated from drawing and generated at a site. These factors will be used fundamental materials for estimating quantities and treatment cost of CW, and scheduling of works.

• Advances in concrete construction
• /
• v.5 no.3
• /
• pp.201-219
• /
• 2017

With the rapid growth in construction sector, it becomes all the more important to assess the amount of Construction and Demolition (C&D) waste being generated and analyze the practices needed to handle and use this waste before final disposal. This serves waste management and disposal issues, paving way to waste utilization in construction industry from the sustainability point of view. C&D waste constitutes a major bulk of total solid waste produced in the world. In this work, an attempt is made to study the performance of concrete using water soaked Recycled Coarse Aggregates (RCA) in replacement levels of 0%, 25%, 50%, 75% and 100% to Natural Coarse Aggregates (NCA). Experiments were designed and conducted to study the performance of RCA based concrete. Further suitable performance enhancement techniques to RCA based concrete were attempted, to achieve compressive strength at least equal to or more than that for no RCA based concrete (control concrete). Performance enhancement study is reported here for 50% and 100% RCA based concretes. All four techniques attempted have given favorable results encouraging use of RCA based concretes with full replacement levels, to adopt RCA based concrete in structural applications, without any kind of concern to the stake holder. Further attempts have also been made to use Recycled Fine Aggregates (RFA) with appropriate modifications to serve as fine aggregates in mortar and concrete. Using RFA blended with river sand fractions as well as RFA with Iron Ore Tailings (IOT) fractions, have given good results to serve as fine aggregates to the extent of 100% replacement levels in mortars and concretes.

• Resources Recycling
• /
• v.17 no.2
• /
• pp.16-29
• /
• 2008

According to the statistical data of the Ministry of Environment, 47million tons of construction waste were generated, and 96.7% of them was recycled in 2005. However, the recycled products seem to be remained under low quality. Because mixed demolition and construction waste, so called DC Waste, including concrete, brick, plaster, lumber, plastics building materials, paper and some dirt and stone, is very variable and difficult to estimate its exact composition, it is regarded as having little or no value to the construction industry. 'The Research group on recycling of construction waste' was started by the Housing & Urban Research Institute(KNHC), which is sponsored as a large scale national project by the Ministry of Construction and Transportation. This research group intends to establish recycling system through planing, processing, developing practical technology, and eventually contribute to save natural resource and to vitalize the industry. In this paper an overview of DC waste management and recycling technology is given in some detail. Particularly, "recycling law of construction waste" and recent research trends on recycling of construction waste are discussed.

• Advances in concrete construction
• /
• v.10 no.5
• /
• pp.369-379
• /
• 2020

Reduction of disposal of waste materials due to construction demolition has become a great concern in recent decades. The research work presents the hardened properties of concrete where the partial substitution of recycled coarse aggregate with natural aggregate in amount of 0%, 10%, 30% and 50%. By using different mixed proportions, fresh and hardened properties of concrete were conducted for this investigation. These properties were compared with control concrete. It can be seen that all of the hardened properties of concrete were decreased with the increasing percentage of recycled aggregate in concrete mixes. It was noticed that up to 30% recycled aggregate replacement can be yielded the optimum strength when it used in normal concrete. Finally, it can be said that disposed recycled concrete utilizing as a partial replacement in natural aggregate is a great way to reuse and reduce environmental hazards which achieve sustainability approach in the construction industry.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.8
• /
• pp.793-800
• /
• 2016

The efficient materials management in construction field is a very important work required for designing and demolishing building. As the waste amount caused by the building demolition is increased, the concern related to the treatment method, recyclability, and effect on the environment have been gradually increased. In general, the conventional databases for the construction materials management does not consider the reuse of the construction materials on steps for the building demolition and reconstruction, but they only consider managing the type and input amount of them. In this paper, we propose the database system for efficiently managing the various construction materials informations including the location and condition of each construction materials for the efficient reuse of them on the building demolition and reconstruction. The considered informations are obtained the RFID(: Radio Frequency IDentification) system with on-board the location estimation module. Using the reuse management of construction materials, based on the proposed database, we expect the reduction of the construction cost and time.