• Proceedings of the Korean Geotechical Society Conference
• /
• 1994.03a
• /
• pp.59-64
• /
• 1994

In order to democractically resolve the "not-in-my-backyard" (Nimby syndrome) which is widespread in Korea, the policy of the Ministry of Environmnt(MOE) is that the MOE is willing to negotiate with local inhabitants who refuse to allow the establishment of waste treatment facilities, and that such facilities will be safety and effectively constructed and managed. According to this policy, the MOE has developed a basic plan to construct 255 incinerators by the year 2001, and establish 42 sanitary landfill sites and 5 specific waste treatment facilities in 1994.s in 1994.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1073-1075
• /
• 2003

We apply the radar interferometry technique to JERS-1 SAR data sets for detection of slow surface deformation occurred in Mt. Baekdu for a 6-year period (from 1992 to 1998). A series of interferograms has been constructed, and they indicated slow uplift deformation around the volcano. However, it is not conclusive because most interferometric fringes correlate with topographic elevation. It is necessary to remove trophospheric effects in the future works.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.46 no.5
• /
• pp.141-153
• /
• 2004

Wetland system is widely accepted as one of natural water purification systems around the world for nonpoint sources pollution control. Constructed wetlands have become a popular technology for treating contaminated surface and waste water. In this study, the field experiment to reduce nonpoint source pollution loadings from polluted stream waters using wetland system was performed from June 2002 to March 2004. Four wetlands were used and the size of each one was 0.8ha. Water of Dangjin stream flowing into Seokmun estuarine reservoir was pumped into wetlands. Inflow and hydraulic residence time of the system was 500 $m^3$/day∼1,500 $m^3$/day, 2∼5 days, respectively. After 2 year operation, plant-coverage of the wetlauds was about 70% from bare soil surface at initial stage . Average water quality of the influent was $BOD_5$ 4.17 mg/L, TSS 18.45 mg/L, T-N 4.32 mg/L, and T-P 0.30 mg/L. The average removal rate of $BOD_5$, TSS, T-N and T-P during the study period was 5.6%, 46.6%, 45.7%, and 54.8%, respectively. Organic ($BOD_5$) removal rate was low and the reason might be low influent concentration. Wetland removal rate of T-P was about 10% higher than T-N. Performance of the experimental system was compared with existing data base (NADB), and it was within the range of general system performance. Overall, the wetland system was found to be adequate for treating polluted water stream with stable removal efficiency even during the winter period. Most of the nonpoint source pollutions from watershed are transported by streams or ditches, and they could be controled by constructed wetland system before entering the lake or reservoir.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.47 no.1
• /
• pp.93-102
• /
• 2005

A prototype surface flow constructed wetland was built in the upstream area of Sihwa reclaimed tidal lands to improve the water quality of Lake Sihwa by treating severely polluted stream water. In this study, we monitored hydrology, macrophyte (Phragmites communis Trin,) growth, and water quality in the Banwol and Donghwa wetlands to evaluate their performance during the initial period after the completion of wetland construction, The average removal efficiency($\%$) in each wetland was relatively low compared with the performance data from the North America Wetland Treatment System Database (NADB), which mainly includes urban sewage-treatment wetlands. However, the average removal rates per unit area ($g/m^{2}/day$) were 0.72, 0.72 and 0.51 (BOD), 2,04, 2.46 and 0.70 (SS), 0.89, 0.43 and 1.09 (TN) and 0.02, 0.02 and 0.02 (TP) in the Banwol and Donghwa wetlands and NADB, respectively. The overall performance of the Banwol and Donghwa wetlands was within the expected range of the wetland system processes contributing the reduction of the pollutant load to Lake Sihwa during the initial period of wetland operation. Considering the low influent concentration, high hydraulic loading rate, and insufficient macrophyte growth since the wetland was constructed, better performance is expected if an improved operational scheme is adopted.

• Journal of Korean Public Health Nursing
• /
• v.15 no.1
• /
• pp.202-215
• /
• 2001

This is an exploratory study to describe drinking patterns and alcohol-related problems (ARP) in women. A probability sample was drawn from Kyungnam Providence area 20 to 59 age by a multi- stage cluster sampling method and secondary data analysis was used. Drinking patterns in this study involve lifetime prevalence of alcohol use, year prevalence, month prevalence , frequency and usual quantity of drinking alcohol in a situation, ARPs were measured by employing a modified version of ARP developed by Alcohol Research Group in U.S.A. Three measurements were constructed to represent alcohol-related problems by summing up 41 alcoholic statements, which were consequence, social consequence and dependence. The results were as follows; 1) The lifetime prevalence of alcohol use in women was $80.3\%$ and year prevalence $78.3\%$. High prevalence rates of drinking were observed in the twenties who have at least community college diploma. and frequencies of alcohol use were increased as age increased. 2) More than $27.3\%$ of the respondents who were reported to experience at least a ARP in a year. 3) ARPs were associated with age, religion, frequency and usual quantity of drinking alcohol in situation. Issues were proposed with respect to research methodology and policy implications for public health.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.11a
• /
• pp.140-148
• /
• 2005

The molten carbonate fuel cell (MCFC) is endowed with the high potential especially in future electric power generation industry by its own outstanding characteristics. KEPCO (KEPRI) started a 100 kW MCFC system development program in 1993 and has been executed 100kW system develpilot plant successfully completed first phaseopment by 2005 on the basis of successful results of 25kW system development. In this program, the components and mechanical structure for 100 kW stack and system construction were completed on last year and now system pre - commissioning was being executed. A 100 kW MCFC power plant was constructed at the site of Boryeong Thermal Power Plant. A 100 kW MCFC system has characterized as a high pressure operation mode, CO2 recycle, and externally reforming power generation system. The 100 kW MCFC system consisted with stacks which was made by two 50 kW sub-stacks, 90 cells with 6,000 cm2 active area and BOP including a reformer, a recycle blower, a catalytic burner, an inverter, and etc. The system has been operated from 13th of September on this year and produced 50 kW AC under atmospheric pressure condition and expected to operate by the end of this year.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.21 no.1
• /
• pp.53-62
• /
• 1979

Since the first installation of irrigation Systems in Korea , a large number of small and medium sized reservoirs have been constructed as the main water sources Some 412, 000 ha are at present irrigated from these sources of supply. Many of the reservoirs were designed in accordance with old low standards and have in addition suffered a loss in capacity through sedimentation. At the same time, water demand has increased with the in troduction of high yielding varieties of rice. The combination has resulted in severe water deficits. To study the problem, 16 sample reservoirs have been surveyed and analysed. The results of the study are summarized be low: 1. Average decrease in reservoir capacity from the installation to present-8% 2. Average soil erosion loss (m$^3$/km$^2$/year) is 536 m$^3$/km$^2$/year and average erosion depth of soil is 0. 5mm per year. 3. No relationship, between reservoir capacity per unit of watershed (m$^3$/km$^2$) and soil erosion loss was found. 4. Increases are required in reservoir capacity: 15.8% due to the introduction of HYV's; 16.6% due to the change of system losses from 10%to 25% The conclusion to be drawn from the above results is that existing reservoir capacity should be increased by an average of 32%. The unit storage capacity to be adopted should be 661 mm

• 한국태양에너지학회:학술대회논문집
• /
• 2008.04a
• /
• pp.55-60
• /
• 2008

This study is on the analysis of power output of transparent thin-film PV windows which are integrated into the building envelope instead of traditional windows. 3 installation angles of vertical, horizontal and $30^{\circ}C$ inclination are investigated. To measure power output of PV windows, full scale mock-up house was designed and constructed. The power performance of PV window system was analyzed for horizontal angle, declination angle and vertical angle according to incline angle. Monitoring data are gathered from November 2006 to August 2007 and statistical analysis is performed to analysis a characteristics of power performance of transparent PV windows. Results show that annual power output of PV window with horizontal angle is 844.4kWh/kWp/year, declination angle 1,060kWh/kWp/year and vertical angle 431.6 kWh/kWp/year.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10b
• /
• pp.94-106
• /
• 2003

In recent years, the production value of Taiwanese mold and die industries have reached to a high peak in 1998, in amount of NT 604 hundred million dollars. But in recent years production value are going down year by year, till year of 2001 the production value have down to NT 394 hundred million dollars. Its main reason might be the major product were following in medium and low price category, the high accuracy and high cost mold and die still rely on import aboard. Therefore how to made the related technical database system on various field to provide the industry user to promote industries competition ability in mold and die is really urgent matter at this moment. In this research, we will offer how to apply the Visual Basic program language to edit a set of more perfect database system of mold and die material selection. At the present time, we have constructed complete Knowledge-Base-System of intelligence for forging mold and die material, the most related data from the existed data, the others are through our additional experimental results. By using this system by the user can got the related and need data easily, we hope it will reduce designing time and cost for mold and die.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2003.04a
• /
• pp.121-121
• /
• 2003

Expressed sequence tags (EST) are help to quickly identify functions of expressed genes and to understand the complexity of gene expression. To assist genetic study of the root development in Panax ginseng, which is one of the most important medicinal plant, expressed sequence tags (EST) analysis was carried out. We constructed a CDNA library using the 4-year Chunpoon root. Partial sequences were obtained from 3,841 clone. The ESTs could be clustered into 2,056 (64%) non-redundant groups. Similarity search of the non-redundant ESTs against public non-redundant databases of both protein and DNA indicated that 1,498 groups show similarity to genes of known function. These ESTs clones were divided into eighteen categories depending upon gene function. The most abundant transcripts were major latex protein (41), ribonuclease 2 (36), metallothionein 2(35). Our extensive EST analysis of genes expressed in 4-year Chunpoong root not only contributes to the understanding of the dynamics of genome expression patterns in root organ development but also adds data to the repertoire of all genomic genes.