• Journal of the Korean Geographical Society
• /
• v.32 no.2
• /
• pp.245-263
• /
• 1997

Housing market is segmented through 1) housing supply classified by housing characteristics and 2) housing demand classified by different housing opportunity of household. Moreover, neighborhood plays a role in intensifying housing market segmentation as a factor affecting on decision making relevant to housing supply and demand. while segmented housing markets have different mechanism, existing studies on residential differentiation and housing market have overlooked the characteristic differences among housing submarkets as the studies presume metropolitan housing market to be a single housing market. while the concept of 'residential differentiation' pays much attention on spatial pattern after the ecological approach appeared, the concept of ‘housing submarkets' is explanatory of the process of urban space structure formation. Analysis on housing submarkets makes up for the weak points of the behavioral approach inquiring into socio-economic constraint and different housing opportunity of household.

• International Journal of Internet, Broadcasting and Communication
• /
• v.8 no.2
• /
• pp.49-54
• /
• 2016

Data delivery is very challenging in VANETs because of its unique characteristics, such as fast topology change, frequent disruptions, and rare contact opportunities. This paper tries to explore the scope of 3G-assisted data delivery in a VANET within a budget constraint of 3G traffic. It is started from the simple S_Random (Srand) and finally reached the 3GSDD, i.e., the proposed algorithm. The performance evaluation of different algorithms is done through the two metrics delivery ratio and average delay. A third function utility is created to reflect the above two metrics and is used to find out the best algorithm. A packet can either be delivered via multihop transmissions in the VANET or via 3G. The main challenge is to decide which set of packets should be selected for 3G transmissions and when to deliver them via 3G. The aim is to select and send those packets through 3G that are most sensitive and requiring immediate attention. Through appropriate communication mechanism, these sensitive information are delivered via VANET for 3G transmissions. This way the sensitive information which could not be transmitted through normal VANET will certainly find its destination through 3G transmission unconditionally and with top priority. The delivery ratio of the packets can also be maximized by this system.

• The KIPS Transactions:PartB
• /
• v.13B no.5 s.108
• /
• pp.547-552
• /
• 2006

There have been various cohesion measurements studied considering reference relation among attributes and methods in a class. Generally, these cohesion measurement are camed out in one class. If the range of reference relation considered are extended from one class to two classes, we could find out the reference relation between two classes. Tn this paper, we proposed a neural network to determine the method location. Neural network is effective to predict output value from input data not to be included in training and generalize after training input and output pattern repeatedly. Learning vector is generated with 30-dimensional input vector and one target binary values of method location in a constraint that there are two classes which have less than or equal to 5 attributes and methods The result of the proposed neural network is about 95% in cross-validation and 88% in testing.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.7 no.2
• /
• pp.45-51
• /
• 2008

The objective of this study is to develop an automatic object changer unit to improve processing problems existed in the conventional horizontal machining center. In order to perform this objective, a upward and downward traverse unit in which a unit that consists of a motor and reducer, chain and sprocket wheel, and upper and lower base employed in an automatic object changer unit performs sliding contact motion in a frame was designed. To achieve this design, constraint conditions for the upward and downward traverse unit first designed. Then, an operation mechanism was designed and that was introduced as a sum of kinetic energy for the sprocket wheel and upper and lower base based on the moment of inertia, which is the kinetic energy of the converted upward and downward traverse unit in the side of the reducer. In addition, The work required to rotate the converted upward and downward traverse unit in the side of the reducer by one revolution can be calculated using the sum of work that is required in the sprocket wheel and upper and lower base that is a part of the upward and downward traverse unit. Furthermore, the converted equation of motion in the side of the motor can be introduced using the equation of motion using the converted upward and downward traverse unit in the side of the motor. Then, Then, a proper motor can be determined using predetermined specifications employed in the motor and several parameters in the upward and downward traverse unit in order to verify such predetermined specifications. Also, a design of a horizontal traverse unit that performs sliding motion on a upward and downward traverse unit and simulation that verifies the results of this design are required as a future study.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.3
• /
• pp.279-288
• /
• 2012

The material removal mechanism in machining is significantly affected by the cutting edge geometry. Its effect becomes even more substantial when the depth of cut is relatively small as compared to the characteristic length which represents the shape and size of the cutting edge. Conventionally, radius or focal length has been employed as the characteristic length with the assumption that the shape of cutting edge is round or parabolic. However, in reality, there could be various ways to determine the radius or focal length even for the same tool edge profile, depending on the region to be considered as cutting edge in the measured profile and the constraints to be set in constructing the best fitted circle or parabola. In this regard, the present study proposes various models to determine the characteristic length in terms of radius or focal length. Their physical compatibility are validated by carrying out 2D orthogonal cutting experiments using inserts with a wide range of characteristic length ($30{\sim}180\;{\mu}m$ in terms of radius) and then by investigating the correlation between the characteristic length and the cutting forces. Such validation is based on the common belief that the larger the characteristic length is, the blunter the cutting edge is and the higher the cutting forces are. Interestingly, the results showed that the correlation is higher for the radius or focal length obtained with a constraint that the center of best fitted circle or the focus of the best fitted parabola should be on the bisectional line of the wedge angle of tool.

• Convergence Security Journal
• /
• v.15 no.4
• /
• pp.35-41
• /
• 2015

Internet of Things has a wide range of vulnerabilities are exposed to information security threats. However, this does not deal with the basic solution, the vaccine does not secure encryption for the data transmission. The encryption and authentication message transmitted from one node to the construction of the secure wireless sensor networks is required. In order to satisfy the constraint, and security requirements of the sensor network, lightweight encryption and authentication technologies, the light key management technology for the sensor environment it is required. Mandatory sensor network security technology, privacy protection technology subchannel attack prevention, and technology. In order to establish a secure wireless sensor networks encrypt messages sent between the nodes and it is important to authenticate. Lightweight it shall apply the intrusion detection mechanism functions to securely detect the presence of the node on the network. From the sensor node is not involved will determine the authenticity of the terminal authentication technologies, there is a need for a system. Network security technology in an Internet environment objects is a technique for enhancing the security of communication channel between the devices and the sensor to be the center.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.6 no.2
• /
• pp.171-182
• /
• 2004

This study is focused on finding out the mechanical behavior of pillars and the ground adjacent to the tunnel depending on the central tunnel size and the invert during the construction of 2 arch tunnels in the sandy ground. Model tests were performed in the trap door system, which was composed of 3 separately movable plates. Central pillar was installed on the central movable plate to measure the pillar loads during the excavation of pilot tunnel and the main tunnel. The load-transfer and the loosening load were measured at the bottom plates adjacent to the 2 arch tunnels. The ground settlement and displacement of the tunnel lining were also measured. As results, not only pillar load but also the load transfer mechanism was influenced by the construction sequences, central tunnel size, and the invert.

• The KIPS Transactions:PartC
• /
• v.9C no.4
• /
• pp.543-550
• /
• 2002

This paper proposes the dynamic slot allocation method for real-time VBR (rt-VBR) services in wireless ATM networks. The proposed method is characterized by a contention-based mechanism of the reservation request, a contention-free polling scheme for transferring the dynamic parameters. The base station scheduler allocates a dynamic parameter minislot to the wireless terminal for transferring the residual lifetime and the number of requesting slots as the dynamic parameters. The scheduling algorithm uses a priority scheme based on the maximum cell transfer delay parameter. Based on the received dynamic parameters, the scheduler allocates the uplink slots to the wireless terminal with the most stringent delay requirement. The simulation results show that the proposed method guarantee the delay constraint of rt-VBR services along with its cell loss rate significantly reduced.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37B no.12
• /
• pp.1113-1118
• /
• 2012

Smart grid and intelligent transportation system draw significant interest since they are considered as one of the green technologies. These systems require a large number of sensors, actuators, and controllers. Also, machine-to-machine (M2M) communications is important because of the automatic control. The LTE-Advanced networks is preparing a set of functions that facilitate the M2M communications, and particularly the development of an efficient call admission control mechanism is critical. A method that groups MTC devices according to QoS constraints and determines the admission depending on the QoS satisfaction is limitedly applied only if the data transmission period and the maximum delay are identical. This paper proposed a call admission control that is free from such limitation and also optimizes the admission process under the certain condition of the transmission period and maximum delay. The theorems regarding the proposed method are presented with the proofs. The simulations confirms its validity and shows it is better in call admission probability than existing works.

• Journal of Broadcast Engineering
• /
• v.7 no.4
• /
• pp.327-334
• /
• 2002

This paper addresses an efficient loop filter algorithm to improve visual quality by simultaneously reducing blocking and ringing artifacts in H.26L video coder. H.26L video coding standard using the different coding mechanism to existing video coding standards has different distribution of blocking and ringing artifacts that is dependent on coding type, quantization step size, and motion vector. Therefore, the information is used to define the filter type and the filter coefficients. and a projection operator is defined to avoid the over-smoothness. In addition, in order to avoid over-smoothing coming from filtering processing, a constraint projection operator is defined. Since the above information is available both in encoder and in the decoder, a loop filter is used, and the algorithm is simplified to reduce the computational cost. Experimental results show the capability of the proposed algorithm.