• 전기학회논문지
• /
• 제62권8호
• /
• pp.1177-1183
• /
• 2013

In this paper, the analysis of inspection period bases on reliability is suggested in the field of traction power system. Even though there are several maintenance models, the most commonly used maintenance assessment has been focused on time based maintenance in real traction power systems. The maintenance intervals are selected on the basis of long-time experience. It ensures high availability and exact planning of staff. Reliability centered maintenance, which evaluates criticality and severity of each failure mode, achieves the operation, maintenance, and cost-effective improvement that will manage the risks of equipment. This paper deals with electrification in railway inspection frequency and applied reliability based inspection frequency instead of constant intervals. The distribution function of failure rate in traction power system belongs to Weibull function. Also, the fault data and the number of installed equipments for electrifications are collected. The failure history is investigated and classified in detail. Though these complicated procedures, it contribute to extend equipment lifetime and to reduce maintenance costs.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.236-241
• /
• 2009

After analyzing the characteristics of the cooling dryer, the mixed cooling dryer was developed by adding the desiccant dryer which supplement the cooling dryer's demerits. Also, the hybrid desiccant cooling dryer was developed to use effectively the exhaust heat energy of the cooling dryer. It could make a more that 20 percent reduction in energy compared with the mixed desiccant cooling dryer. It has become essential to supply this equipment and search the suitable drying product.

• 대한화학회지
• /
• 제16권2호
• /
• pp.106-116
• /
• 1972

물 및 Methyl Alcohol 과 같은 液體에 젖은 巨大孔 不活性 微少孔 不活性 및 微小孔 濕潤性 物質을 乾燥할때 假濕球 溫度가 普扁的으로 形成되며 假濕球 溫度는 空氣乾操의 第 2 減速期中 乾球溫度와 濕球溫道間에 나타난 하나의 새로운 一定溫道이다. 이 溫度는 液體 空氣 境界에서의 熱傳達, 蒸氣壙散, 液體蒸發 現象을 考慮한 式으로 計算되며 Nissan Bolles 및 George가 誘導한 式에 依하여 計算된 數値는 實險結果値와 一致한다.

• Journal of the Optical Society of Korea
• /
• 제8권1호
• /
• pp.29-33
• /
• 2004

We propose and demonstrate a novel optical pulse multiplier applicable to OTDM (Optical Time Division Multiplexing) systems using cascaded long-period fiber gratings. We have exploited the fact that each mode in a fiber has a different propagation constant to obtain time delays among optical pulses. The proposed scheme could realize high-frequency optical pulse multiplication for optical short pulse trains. We have successfully implemented two, four, and eight times multiplications with the maximum repetition rate of 416.7 ㎓. The obtained pulse delays are well matched with the simulated ones.

• Journal of Biosystems Engineering
• /
• 제28권4호
• /
• pp.361-368
• /
• 2003

This study was intended to investigate the temporal and spatial variabilities of dry matter, nitrogen content, chlorophyll of paddy rice and yield caused by different rates of nitrogen application. An experimental field was divided into 45 plots of 3.48 ${\times}$ 12 m in size and application rate of nitrogen varied from 0 to 235% with an increment of 25% based on the standard rate of N-P$_2$O$_{5}$-K$_2$O=12-8-8 kg/10a. The measurements were made 8 times every 9-10 days after the transplanting. About 60 days after the transplanting, there exhibited little variabilities in the dry matter caused by different rates of nitrogen application. After that. however, there showed large variabilities and the dry matter increased with the application rate. The nitrogen content of paddy also increased with the application rate but it was inconsistent. After the tillering period, the nitrogen content remained constant. In the early stage of the tillering period the nitrogen content decreased in spite of increase in the dry matter. However. after a certain period of time it increased with the dry matter. There were little variabilities of chlorophyll after the transplanting. However, the SPAD increased with application rate of nitrogen as the paddy grew. After the tillering period SPAD was not affected by the different rates. More yield was obtained at the plots where larger nitrogen content was measured.d.

• International Journal of Automotive Technology
• /
• 제6권4호
• /
• pp.305-314
• /
• 2005

Injection rate shape control is one feature of a diesel fuel injection system that is strongly desired at this time. In the conventional common rail system, it is difficult to control the injection rate since the fuel pressure is constant during the injection period, resulting in a nearly rectangular rate shape. In order to look into possible injection modulations, injectors equipped with standard and geometrically modified control valves were investigated in detail by means of computer modelling and simulation. Experiments were carried out to validate the feasibility of such a shaping. The results of this study show a noteworthy dependence of the fuel rate on geometrical modifications in the piloting stage of the injector.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1181-1192
• /
• 2008

A laboratory investigation was carried out into effects of strain rate on undrained shear behavior of Holocene clay underneath Kobe Airport with an objective to evaluate the factor of safety of the retaining structure built on it. It was examined in a series of triaxial compression and extension tests performed using different rate of axial straining. A comparative compression test in which the strain rate was changed in steps was also carried out. Similar tests were performed in constant-volume direct shear box (DSB) test. And, the deformation characteristics of the clay were also examined in order to evaluate the variation of stiffness during undrained shearing. It was found that the undrained strength increased with not only the shear rate but also the consolidation period. ISOTACH properties seemed a key to govern the undrained shear behavior.

• 한국식품영양과학회지
• /
• 제26권6호
• /
• pp.1021-1027
• /
• 1997

$CO_2$production in fermentation of dongchimi was measured and interrelated with changes in pH and titratable acidity. The effects of salt content and temperature on $CO_2$production rate were analysed. Fermentation of dongchimi showed drastic pH decrease in early stage and subsequent levelling off around 3.9, with linearly increased acidity up to 0.3~0.4% optimum quality. $CO_2$production of dongchimi could be analysed to consist of two consecutive stages of constant rate. The first stage $CO_2$production of higher rate moved to the second stage of lower rate when acidity rose beyond 0.3%. When compared to those of 1 and 2% salt content, dongchimi of 3% salt showed lower $CO_2$production rate in the 1st stage and slower acidity change through the whole fermentation period. However, it resulted in the product of highest $CO_2$accumulation at optimal ripeness because of consistent $CO_2$production of longer 1st stage period and relatively high $CO_2$production rate in 2nd stage. $CO_2$production depended on temperature less compared to acidity change(activation energy: 57.3 and 44.3kJ/mol for $CO_2$production of 1st and 2nd stages, respectively; 79.3kJ/mol for acidity change), which means higher ratio of $CO_2$production rate relative to acidity increase at lower temperature. Slower increase in acidity at low temperature also was shown to extend the period of 1st stage $CO_2$production. Therefore, low temperature fermentation was effective in producing the high $CO_2$content dongchimi at adequate acidity, which is desirable organoleptically.

• The Korean Journal of Ecology
• /
• 제9권3호
• /
• pp.161-184
• /
• 1986

An experiment was made in order to analyze the growth characteristics and productivity of Zoysia japonica under control, mowing and TIBA treatment conditions at the experimental farm of Kyung Hee univ. from May 26 to Oct. 1 in 1985. The field was planned by the randomized block design method and each treatment was given to three plots (2${\times}$2, 4${\times}$4 and 10${\times}$10 cm) and was replicated three times. Each plot was 1$m^2$ for Zoysia japonica. The sampling of each plot was taken once a week after sowing. In order to know the dry matter of total standing crops, kept 9$0^{\circ}C$ and weighted each organ of the plants. Total leaf area of a plant was measured by drawing method. The author adopted the growth analysis of English School. The increasing rates of numbers of leaf and stem were remarkably high in each plot between 10th and 12th weak after sowing and it was highest in TIBA treated plot. The increasin rate of leaf area in each plot was remarkably high beween 10th and 12th week and the maximum value of leaf area was 274.00c$m^2$ in TIBA treated plot of 100 plants/$m^2$. The increasing rate of standing crop was remarkably high between 10th and 12th week and the high increasing tendency in TIBA plot resulted from TIBA. The positive correlationship was founded between standing crop and leaf area. The evaporation rather than temperature acted as a main factor of negative correlation with standing crop during the experiment period. Solar radiation had a high positive correlation in the lower density of plot. C/F ratio was low, during the growth period, from 10th to 12th week after sowing and was low in the higher density under each treated plot. T/R ratio was not constant during the sampling period but was high in the lower density. The increasing rates of RGR and NAR were high between 11th and 12th week after sowing. Leaf area ratio was high in higher density in each plot and not constant in all treated plot.

• 방사성폐기물학회지
• /
• 제3권4호
• /
• pp.329-333
• /
• 2005

모의지하수중에서 가압경수로형 사용후핵연료로부터 세슘의 침출률에 미치는 공학적 방벽 영향을 규명하기 위하여 지난 약 6년간 벤토나이트 또는 금속시편등의 존재여부에 따라 침출시험을 수행하였다. 침출률은 시간이 경과함에 따라 지수함수적으로 감소하는 경향을 나타내었으며, 적정시간이 경과한 다음부터는 일정한 값에 수렴하는 경향을 나타내었다. 벤토나이트 또는 금속시편이 있을 경우 세슘의 누적누출분률은 선형적으로 증가하였으나, 이들이 없는 경우의 누적분률은 급격히 증가한 다음 서서히 증가하는 경향을 보였다. 이 누적분률에서 갭에 존재하는 세슘의 재고량을 제한 값은 공학적 방벽이 존재하는 경우의 누적분률에 거의 근접하였다. 이러한 결과들은 사용후핵연료 중 세슘의 초기누출분률은 갭 중 세슘의 재고량에 의존하지만, 세슘의 장기침출률은 공학적 방벽에 거의 영향을 받지 않음을 암시해 주고 있다. 그러나 세슘의 초기침출률은 공학적 방벽의 지연효과로 감소될 수 있을 것이다. 그리고 처분장에서 사용후핵연료 중 세슘의 장기침출률은 $2\times10^{-2}\;g/m^2-day$를 넘지않는 범위 내에서 일정한 값을 가질 것이다.