• 대한기계학회논문집A
• /
• 제26권3호
• /
• pp.521-527
• /
• 2002

In this paper, tensile behavior and low cycle fatigue behavior of 316L stainless steel which is currently favored structural material for several high temperature components such as the liquid metal cooled fast breeder reactor (LMFBR) were investigated. Research was performed at 55$0^{\circ}C$, $600^{\circ}C$ and $650^{\circ}C$ since working temperature of 316L stainless steel in a real field is from 40$0^{\circ}C$ to $650^{\circ}C$. From tensile tests performed by strain controls with $1{\times}10^{-3}/s,\; l{\times}10^{ -4}/s \;and\; 1{\times}10/^{ -5}/ s $ strain rates at each temperature, negative strain rate response (that is, strain hardening decreases as strain rate increases) and negative temperature response were observed. Strain rate effect was relatively small compared with temperature effect. LCF tests with a constant total strain amplitude were performed by strain control with a high temperature extensometer at R.T, 55$0^{\circ}C$, $600^{\circ}C$, $650^{\circ}C$ and total strain amplitudes of 0.3%~0.8% were used and test strain rates were $1{times}10^{-2} /s,\; 1{times}10^{-3} /s\; and\; 1{times}10^{-4} /s$. A new energy based LCF life prediction model which can explain the effects of temperature, strain amplitude and strain rate on fatigue life was proposed and its excellency was verified by comparing with currently used models.

• 한국항공우주학회지
• /
• 제48권5호
• /
• pp.363-372
• /
• 2020

고 변형률 속도에 대한 소재의 동적 압축 물성은 고속 충돌 및 고속 성형 등 동적 환경에서의 유한요소 해석의 신뢰성 향상을 위해 필수적이다. 일반적으로 고 변형률 속도에 대한 소재의 동적 압축 물성은 SHPB(Split Hopkinson Pressure Bar) 장비를 통해 획득 가능하다. 본 연구에서는 최근 무인 항공기에 확대 적용되고 있는 Woven type CFRP(Carbon Fiber Reinforced Plastic) 소재에 대한 충돌 해석에 대응하기 위해 SHPB 장비를 활용하여 해당 소재의 동적 압축 물성을 획득하였다. 또한 Pulse shaper를 활용하여, Elastic-brittle 특성을 지니는 소재에 대한 일정한 변형률 속도 확보 및 실험 데이터에 대한 신뢰도를 향상시켰다. CFRP 소재의 경우 방향 별 기계적 물성이 다른 이방성 소재이므로 두께 방향과 면내 방향 시편을 제작하여 각각 실험을 수행하였다. SHPB 실험 결과 면내 방향 시편의 경우 일정한 변형률 속도 영역에 도달하기 전, 시편의 파단이 발생하여 데이터의 재현성 및 신뢰성 확보에 어려움이 있는 반면, 두께 방향의 시편의 경우 시편 전·후면 응력일치도가 우수하여 데이터 신뢰도가 높으며, 일정한 변형률 속도 영역을 획득할 수 있다. LS-dyna를 활용한 유한요소해석을 통해, 압력봉으로부터 측정되는 데이터는 시편과 압력봉의 변형에 의해 변형률이 과도하게 예측되는 것을 확인하였다.

• 한국농공학회지
• /
• 제30권4호
• /
• pp.134-153
• /
• 1988

This paper was carried out to investigate the existence of a unique stress- strain behavior by obtaining some factors influencing the time dependent stress- strain behavior of clay. The results obtained from this study were summarized as follows ; 1. The relationship between stress ratro and strain in normally consolidated clay was in- dependent on pre-shear consolidation pressure. Therefore, shear strain could be expressed as a function with stress ratio. 2. The constitutive equation of shear strain on Modified Carn Clay Model coincided better with the observed value than Cam Clay Model. 3. The relationships between deviator stress and shear strain, between pore water pressure and shear strain were unified by the mean equivalent pressure. 4. The shear strain contour in norrnally consolidated clay was increased linearly through origin, but that in overconsolidated clay was not in accordance with the result of the former. 5. Because the effective stress path of normally consolidated clay was unified by the mean equivalent pressure, state boundary surface in (e,p,q) space was transformed into two dimensional surface. But it was considered to be suitable that the unified stress- strain in overconsolidated clay be expressed by a function with overconsolidation ratio. 6. The deviator for constant strain was increased linearly with increment of strain rate ($\varepsilon$) on semi-log scale, but pore water pressure was decreased. 7. The behavior of stress relaxation was transformed from linear to curvilinear with inc - rement of strain rate before stress relaxation test, and pore water pressure was increased in total range. 8. The strain of creep was increased linearly with increment of time on semi-log scale. The greater the strain rate before creep test became, the greater the increment of strain of creep became. And the pore water pressure during creep test was increased generally with increment of time on semi-log scale.

• 한국지반공학회논문집
• /
• 제18권4호
• /
• pp.147-157
• /
• 2002

본 연구에서는 방사방향의 배수조건을 갖는 점성토의 압밀특성을 짧은 시간에 정확하게 평가할 수 있는 방사배수 일정변형률 압밀시험을 위한 시험기와 해석이론을 개발하였다. 개발된 시험기 및 해석이론에 대한 적용성을 검토하기 위하여 성형시료 및 불교란 시료에 대하여 방사배수 일정변형률 압밀시험과 단계하중 압밀시험을 실시하였다. 압밀곡선으로부터 평가되는 압밀정수 및 압밀계수에 대한 비교, 분석을 통하여 제안된 시험기 및 이론의 신뢰성과 적용성을 평가하였고, 방사배수 시험과 더불어 수행된 연직배수 일정변형률 압밀시험과 단계하중 압밀시험을 통하여 배수방향에 따른 영향과 시험기 및 해석이론의 적용성을 분석하였다. 또한, 일정변형률 압밀시험시 발생하는 과잉간극수압에 대한 분석을 통하여 간극수압의 발생 양상 및 실험결과에 미치는 영향을 확인하였다.

• 대한토목학회논문집
• /
• 제26권5C호
• /
• pp.333-342
• /
• 2006

본 연구에서는 방사내측배수 조건하에서 일정변형률 압밀시험을 실시할 수 있는 실내시험용 압밀실을 개발하였다. 또한 이를 분석하고 관련 압밀특성을 결정할 수 있는 이론해를 제안하였다. 성형 카올리나이트를 이용하여 개발된 시험기에 의한 방사내측 일정변형률 압밀시험과 더불어 비교 대상이 되는 방사내측배수, 연직배수와 방사외측배수에 대한 단계재하 압밀시험과 방사외측배수 및 연직배수 일정변형률 시험을 실시하였다. 이를 통하여 개발된 방사내측배수 일정변형율 시험기의 결과들이 타 실험방법의 결과들과 일치할 뿐만 아니라, 시료 교란 효과가 줄어든 안정적이고, 신뢰성 높은 결과를 제시하는 것을 확인하였다.

• 소성∙가공
• /
• 제3권4호
• /
• pp.415-426
• /
• 1994

Multistage deformation behavior of Nb-microalloyed steel and carbon steel was studied by torsion test with declining temperature T, constant pass strain $\varepsilon_i$, interrupt time $(t_i)$, and varying strain rate $(\.{\varepsilon})$. In the range of $1000^{\circ}C~790^{\circ}C$ and 4.00/sec~0.38/sec, the flow stress at each pass was correlated to the deformation variables. As the finished deformation temperatures are decreased to the range of $790^{\circ}C~900^{\circ}C$, Nb precipitates play an important role on the grain refinement of Nb-microalloyed steel. the flow stress of Nb-microalloyed steel was higher than the carbon steel's while the grain size of Nb-microalloyed steel was smaller than carbon steel below the temperature of $900^{\circ}C$.

• Journal of Welding and Joining
• /
• 제18권3호
• /
• pp.97-105
• /
• 2000

The stress corrosion cracking(SCC) and hydrogen embrittlement cracking(HEC) characteristics of a weathering steel weldment were investigated in aerated acid-chloride solution. The electrochemical properties of weldment were investigated by polarization test and galvanic corrosion test. Weathering steel did not show passive behavior in the acid-chloride solution. Galvanic corrosion between the weld metal and the base metal was not observed because the base metal was anodic to the weld metal. The slow-strain-rate tests(SSRT0 were conducted at a constant strain rate o 7.87×{TEX}$10^{-7}${/TEX}/s at corrosion potential, and at potentiostatically controlled anodic and cathodic potentials. The weldment of weathering steel was susceptible to both anodic dissolution SCC and hydrogen evolution HEC.

• International Journal of Ocean System Engineering
• /
• 제1권4호
• /
• pp.230-235
• /
• 2011

Reinforced polyurethane foam (RPUF) is one of the important materials of Mark III type insulation systems used in liquefied natural gas (LNG) cargo containment systems. However, RPUF is the most difficult material to use with regard to its safety assessment, because there is little public and reliable data on its mechanical properties, and even some public data show relatively large differences. In this study, to investigate the structural response of the system under compressive loads such as sloshing action, time-dependent characteristics of RPUF were examined. A series of compressive load tests of the insulation system including RPUF under various temperature conditions was carried out using specimens with rectangular section. As a result, the relationship between deformation of RPUF and time is linear and dependent on the loading rate, so the concept of strain rate could be applied to the analysis of the insulation system. Also, we found that the spring constant tends to converge to a value as the loading rate increases and that the convergence level is dependent on temperature.

• 대한기계학회논문집
• /
• 제17권8호
• /
• pp.2033-2042
• /
• 1993

In conventional SCC susceptibility test, there are constant strain test, constant load test, slow strain rate test(SSRT) and K$_{ISCC}$ test. Among them, the SSRT method is much more aggressive in producing SCC than the other tests, so that the test time of it is considerably reduced. But this SSRT method has mostly been worked using the uniaxial tensile specimen untill now. Therefore, the SSRT method using the tensile specimen(Ten-SSRT) has much difficulty in SCC susceptibility evaluation of a localized region like weldment and the advantage material of high order. Recentely, the small punch(SP) test method using miniaturized small specimen is the very effective test method for fracture strength evaluation of a localized region like weldment and fusion reactor wall irradiated in the nuclear power plant. This paper investigated the possibility of SCC susceptibility evaluation by the SP-SSRT method using the miniaturized small specimen. Therefore, we obtained the result that the SP-SSRT had the possibility for the evaluations of SCC susceptibility for shorter time to corrosive environment compare to Ten-SSRT which was conventional method.

• 한국지진공학회논문집
• /
• 제5권4호
• /
• pp.97-105
• /
• 2001

고무제품에 근간을 둔 면진장치는 상당한 저온효과와 약간의 변형도 속도효과를 보여준다. 면진장치의 비탄성거동에 영향을 미치는 이들의 속성은 면진장치의 거동을 정확히 모델링하기 위해 반드시 고려되어져야 하기 때문에, 고무와 납 모두에 영향을 미치는 저온효과와 변형도 속도효과를 고려할 수 있는 해석모델을 제시하였다. 얼린 면진장치를 일정 수직하중에서 수평방향 반복하중을 가한 실험결과들로부터 시스템 식별(SI : system identification)을 적용하여 해석모델에 필요한 고무와 납의 매개변수들을 구하였다. 제안된 해석모델은 면진장치의 거동을 유사하게 표현할 수 있음을 보여준다.