• KIEAE Journal
• /
• v.7 no.4
• /
• pp.3-8
• /
• 2007

This study is aimed to apply basic data to planning earth building through analyzing characteristics of earth building. For doing it, we investigated a research paper in advanced countries(New zealand, Australia, etc.) that has been used for earth building standards for a long time, and then we corrected inadequate standards that would apply our earth building environment. As a result, we can devide earth characteristics into three parts that are materials, plan, and maintenance and repair. First, as material selection is very important factor, a general plan is possible to change in accordance with what material is selected. These methods that made mud brick, pressed earth block, rammed earth, cob have been well used during the current 30 years in earth building. Second, the plan is composed of site select and architecture plan. In architecture plan, we should consider from foundation to eaves protection, and in site selection, consider sides of the environment and the social. Third, we should always check a periodical inspection through watchful observation because earth buildings need more time and efforts in maintaining and repairing than others.

• The Mathematical Education
• /
• v.47 no.2
• /
• pp.113-133
• /
• 2008

This study is to develop the methods of specifying teaching that can consider individual differences in middle school geometry education. The purpose of this study is to decide the variations causing individual differences and to find the proper learning methods considering the variations. Through literature review, this study made it clear that the matter of individual difference is just the matter of talent and examined what factors make up mathematical talents. On the basis of the result, five important variations and fourteen subordinate factors were determined. I researched into the learning methods that consider the determined subordinate factors using the 'congruence' unit of middle school textbooks and developed specific learning methods for each of the subordinate factors through specific congruence problem solving situations. This study can be summarized as follows : I researched the studies of mathematical ability conducted by several educators and psychologists. This research is divided into the early study and the developed study of mathematical ability. Through this study five specific variations were determined. And fourteen subordinate factors have been made from the determined variations. The specific learning methods based on individual differences was developed according to the fourteen subordinate factors on the basis of middle school textbooks of Korea, Gusev's textbook, problem books of Russia, and etc.

• International Journal of Contents
• /
• v.5 no.3
• /
• pp.8-13
• /
• 2009

The recent Web service field emerges as the fastest growing IT paradigm as a result of the increasing interest in SOA (Services-Oriented Architecture) and the expansion of B2B market. With an increasing number of Web service that provide similar features, it becomes more important to provide the most appropriate service for the user's request. A service user in general requires the quality information of Web service when selecting a service among a number of similar Web services. Yet, finding a service through UDDI (Universal Description, Discovery and Integration) does not consider the non-functional aspects of users because it is only based on the functional aspects. That is, the quality, non-functional aspect will be an important factor for the mutual success of the user and provider. Using 3 factors in the Qos factors of the existing studies: the execution cost, reliability, and the quality level, the QoS of Web service is saved and the factors for the QoS are recorded in order to consider non-functional factors when selecting a Web service in this study. The Quality Broker determines the rank and shows the desired result of the service for users. The Quality Broker suggested in this thesis can be used to select a Web Service that considers the user-oriented and non-functional factors.

• Journal of Fashion Business
• /
• v.16 no.6
• /
• pp.109-126
• /
• 2012

The purpose of this study was to examine the effect of price-attitude toward apparel products on shopping values and consumption behavior. The study was carried out in Deagu and Kyungbook area. Applying the convenience sampling, total 326 questionnaire were collected from university students who were randomly selected as participants. This study used frequency, factor analysis, reliability analysis, regression analysis, and t-test for data analysis. The finding are as follows. Price-attitude toward apparel products was categorized into information leading, price dignity, price discount, list price orientation, quality value and using coupons. Shopping tendency factors were found as pursuit of pleasure, pursuit of sociality, and pursuit of economic feasibility. Consumption behavior factors were categorized into impulsive buying, ostentatious consumption, utilization of internet information, possession of material and brand trust. Price-attitude toward apparel products had a significant effect on shopping values and consumption behavior. University students seemed to consider the value of money to be very important as well as economic feasibility. They utilized information from the internet to buy products with good quality and showed high usage level of coupons. And, university students who buy at a least price tried to show dignity with expensive brand products and they consider those brands express self-confidence.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1998.10a
• /
• pp.568-576
• /
• 1998

In this thesis discuss with a flexible robotic finger design and controller which is used for the micro flexible robotic finger. So, miniaturization, precision, controller for the control of grasping force and actuator were needed. And, even if we develop a new actuator and controller, in order to use on real system, we must considerate of a many side problem. In a force control of micro flexible finger for grasping an object, the fingertip's vibration was more important task of accuracy control. And, controller were adopt the PD/PI mixed type fuzzy controller. The controller were consist of two part, one is a PD type fuzzy controller for increase the rising time response, the other is a PI type fuzzy controller for decrease of steady-state error. Especially, in a PD type fuzzy controller, we used only seven rules. And, for a PI controller, we adopt a reset factor for the control of input values. so, we have overcome the exceed of controller's input range. For the estimate of ontroller's utility and usefulness, we have experiment and computer simulation of three cases. First, we consider of unit force grasping control for a task object, which is 0.03N. Second, bounding grasping force control which is add to a sinusoidal force on the unit force. At this cases the task force is (0.03+0.01 sin wt N). And consider of following of rectangular forces.

• KIEAE Journal
• /
• v.9 no.1
• /
• pp.107-113
• /
• 2009

The energy cost is resulted from the energy use. Its sources are divided into some types and depended on the building use or energy-use type. The energy cost should be affected by the amount of the energy use. The cost could be calculated to consider various factors such as the insulation, heating type, building shape and others. But it can not consider all of the affect factors to the energy cost and need to categorize the factors to the condition for estimating the cost. In this paper, it aimed at providing the estimation model in linear equation and multiple linear regression, utilizing the building exterior condition and management characteristics in apartment housing. Its survey are conducted in two parts of management characteristics and building exterior condition. The correlation analysis is conducted to get rid of the multicolinearity among the inputted factors. The number of linear equation model is 11 and includes the 1st, 2nd and 3rd equation function, power function and others. Among these, it suggested the 2nd and 3rd function and power function in terms of the statistics. In multiple linear regression model, the building volume and management area are inputted to the estimation.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.2
• /
• pp.248-257
• /
• 2014

As observed in the recent war, suppression of enemy air defense operation is one of the major tactics, simultaneously conducted with high payoff target. Specifically, our air defense operation should be properly constructed, since the operating environment of our forces mostly consists with mountainous terrain, which makes detections of the enemy difficult. The effective arrangements of low altitude air defense radars can be suggested as a way of improving the detection capability of our forces. In this paper, we consider the location problem of low altitude air defense radar, and formulate it as an Integer Programming. Specifically, we surveyed the previous researches on facility location problems and applied two particularly relevant models(MCLP, MEXCLP) to our problem. The terrain factor was represented as demand points in the models. We verified the optimal radar locations for operational situations through simulation model which depicts simple battle field. In the simulation model, the performance of optimal radar locations are measured by the enemy detection rate. With a series of experiments, we may conclude that when locating low altitude air defense radars, it is important to consider the detection probability of radar. We expect that this finding may be helpful to make a more effective air defense plan.

• Journal of Climate Change Research
• /
• v.7 no.3
• /
• pp.357-371
• /
• 2016

Buildings in the city acts as a cause of distorted wind direction, wind speed, causing the stagnation of the air flow. In the recent trend of climate change can not but consider the temperature rise of the urbanization. This study was aimed to analyze the thermal comfort of planetary boundary layer in different artificial constructions areas which has a direct impact on urban climate, and estimating the warming phenomena. Envi-met model was used to consider the urban structure associated with urban growth in order to precisely determine the impact of the building on the city weather condition. The analyzed values of thermal comfort index were temperature, wind speed, horizontal and vertical turbulent diffusivity. In particular, analysis of the PPD(Predicted Percentage of Dissatisfied) represents the human thermal comfort. In this study, by adjusting the arrangement and proportion of the top floor building in the urban it was found that the inflow of the fresh air and cooling can be derived low PPD. Vertical heat flux amount of the city caused by climate change was a factor to form a high potential temperature in the city and the accumulation of cold air does not appear near the surface. Based on this, to make the city effectively respond to climate change may require a long-term restructuring of urban spatial structure and density management.

• Journal of Korean Association for Spatial Structures
• /
• v.20 no.4
• /
• pp.159-167
• /
• 2020

The resilience performance evaluation method of a structure can evaluate the ability to recover after an earthquake disaster, and this study deals with the consideration and introduction of the resilience performance evaluation method. The resilience evaluation method can be expressed as a quantified number by constructing a loss estimation model and a recovery evaluation model. The recovery evaluation model should consider downtime in addition to the repair time, and the loss estimation model should consider not only direct loss to structures and non-structures, but also indirect loss due to functional loss of the building. In addition, to build a loss estimation model, the structure should be simplified to perform an efficient analysis. Therefore, in this study, the equivalent terminal induction system proposed cantilever-type and rahmen-type SDOF, and it is evaluated somewhat conservatively compared to the example structure, and it is judged that there is a need to improve the hysteresis characteristics by applying the stiffness reduction factor of the SDOF model.

• Nuclear Engineering and Technology
• /
• v.54 no.10
• /
• pp.3962-3973
• /
• 2022

Several critical heat flux (CHF) correlations including the look-up table in the MARS code have been assessed for the prediction of CHF in a downward-flow narrow rectangular channel. For the assessment, we built an experiment database that covers pressures between 1.01 and 39.0 bar, gap sizes between 1.09 and 6.53 mm, mass fluxes up to 25,772 kg/m²s, and under one-sided and two-sided heating conditions. The results of the assessment showed that the Kaminaga correlation has the best overall prediction compared to others. However, because the correlation uses global variables, such as inlet and outlet subcooling and total heat transfer area, it is difficult to use in a system code. A new CHF correlation is then proposed by replacing the global variables in the Kaminaga correlation with local ones and adding correction factors to consider the effect of gap size, mass flux, and the number of heating walls. Additional correction factor is added to consider the effect of inlet subcooling. It is shown that the new one is better than the Kaminaga correlation and it is easy to implement to any system code.