• Journal of the Korean Society for Railway
• /
• v.19 no.5
• /
• pp.638-646
• /
• 2016

CWR (continuous welded rail) tracks on high-speed railway bridges have much more complicated axial force distributions caused by track-bridge interaction than those behaviors on embankments, and additional problems caused by track-structure interaction with the axial force of the CWR. In order to analyze and limit other physical phenomena caused by track-bridge interaction, a design guideline (KR C-08080, longitudinal track-bridge interaction analysis) is used when designing CWR track on bridges. Domestic analysis and design methods for track-bridge interaction follow the UIC 774-3R, and they suggest conservative methods and deterministic properties. Recently, many studies analyzing the methods of track-bridge interaction considering the loading history are being carried out; however, there has been insufficient studies of the variation of the resistance properties with a consideration of the actual loading history. In this study, the performances of rail fastening systems used for concrete track on bridges were tested and analyzed while considering the loading history. For this purpose, longitudinal and vertical loading combinations, applied in order to simulate the practical conditions and resistance characteristics (stiffness and elastic limit displacement), are analyzed through the experimental results. Also, a comparison study was conducted with the properties in the KR Code.

• Journal of Radiation Protection and Research
• /
• v.39 no.2
• /
• pp.70-80
• /
• 2014

The interpretation on the diffusion of radiation contaminants in air is usually to apply a Gaussian plume equation that obtains normal distributions in stable air flow conditions to draw a conservative conclusion. In this study, a numerical study using computational fluid dynamics methods was performed to interpret the air flow pattern and the diffusion of the radiation contaminants at the Wolseong nuclear power plants, and a more detailed solution can be obtained than the Gaussian plume equation, which is difficult to use to simulate complex terrains. The results show that a significant fluctuation of air flow in the terrain appears in the case of a northwester and southeaster because of the mountain located in the northwest and the sea located in the south-east. The northwesterly air flow shows the most unstable flow in the vertical direction when it passes over the terrain of mountain. The stable southeasterly air flow enters into the nuclear power plant from the sea, but it becomes unstable rapidly because of the interference by the building and the terrain. On the other hand, in the case of a northeaster and southwester, a small interruption of air flow is caused by the terrain and wake behind the buildings of nuclear power plants.

• Journal of the Korean Geographical Society
• /
• v.50 no.4
• /
• pp.375-391
• /
• 2015

Trees to arrest sand-shifting have been planted on most of coastal dunes in Korea and considered as conservative objects. However, we reconsider that the simplicity of these trees have hindered ecological roles of coastal dunes; geochemical cycle and habitats of endemic species in coastal ecosystem. We examined geochemical properties of sediments on Byunsuran dune field where is planted with pine trees. There are significant difference in properties between embryo dune sediments and foredune sediments, but there are not between foredune and secondary dune. There are no significant difference between pine forest sediments and mixed forest sediments. It is also not showed the difference between dune ridge sediments and swale sediments. Despite spatial diversity from appearance, geochemical properties are not linked with geomorphic and vegetational conditions because of dense planted trees on foredune. To recover natural properties of coastal dunes, we need to change the conservation scheme to increase geomorphic and ecological diversity.

• Geophysics and Geophysical Exploration
• /
• v.19 no.3
• /
• pp.136-144
• /
• 2016

Since seismic inversion is based on the wave equation, it is important to calculate the solution of wave equation exactly. In particular, full waveform inversion would produce reliable results only when the forward modeling is accurately performed because it uses full waveform. When we use finite-difference or finite-element method to solve the wave equation, the convergence of numerical scheme should be guaranteed. Although the general proof of convergence is provided theoretically, the consistency and stability of numerical schemes should be verified for practical applications. The implementation of source function is the most crucial factor for the consistency of modeling schemes. While we have to use the sinc function normalized by grid spacing to correctly describe the Dirac delta function in the finite-difference method, we can simply use the value of basis function, regardless of grid spacing, to implement the Dirac delta function in the finite-element method. If we use frequency-domain wave equation, we need to use a conservative criterion to determine both sampling interval and maximum frequency for the source wavelet generation. In addition, the source wavelet should be attenuated before applying it for modeling in order to make it obey damped wave equation in case of using complex angular frequency. With these conditions satisfied, we can develop reliable inversion algorithms.

• Journal of Korean Medicine Rehabilitation
• /
• v.28 no.4
• /
• pp.51-57
• /
• 2018

Objectives Low back disability, along with low back pain, places a significant social burden in terms of work loss and medical expenses. Motion-Style-Acupuncture-Treatment using Traction (T-MSAT) is employed as one of the conservative treatments to such conditions. In the present study, effectiveness of Korean Medical treatments, including T-MSAT, was investigated in inpatients with low back disability and low back pain. Methods Among the patients who were admitted between January 2018 to June 2018 with disabled low back function, ones that were treated with T-MSAT were identified. Pain and function were compared at the point of admission and discharge, using Numerical Rating Scale (NRS) and Oswestry Disability Index (ODI), respectively. Results Over the hospitalization period of 34.55 days, pain intensity significantly decreased from NRS score of 6.14 to 3.26 and low back function also significantly improved from ODI score of 50.93 to 33.73 upon receiving Korean Medical treatments including T-MSAT. Conclusions Korean Medical treatments including T-MSAT were found to be effective in inpatients with low back disability with a statistical significance. To evaluate the sole effectiveness of T-MSAT, rigorous clinical trials are necessitated in future.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.2
• /
• pp.151-158
• /
• 2010

In order to measure the deposition velocity of $I_2$ vapor for radish plants and its translocation factor for their roots, radish plants were exposed to $I_2$ vapor for 80 min. at different growth stages between 29 and 53 d after sowing. The exposure was performed in a transparent chamber during the morning time. Deposition velocities ($ms^{-1}$) were on the whole in the range of $1.0{\times}10^{-4}{\sim}2.0{\times}10^{-4}$ showing an increasing tendency with an increase in the biomass density. The results showed some agreement with existing reports that a higher relative humidity would lead to a higher deposition velocity. The acquired deposition velocities were lower than by factors of several tens than some field measurements probably due to a very low wind speed (about $0.2\;ms^{-1}$) in the chamber. Translocation factors (ratio of the total iodine in the roots at harvest to the total plant deposition), estimated in a more or less conservative way, were $1.3{\times}10^{-3}$ for an exposure at 29 d after sowing and $5.0{\times}10^{-3}$ for an exposure at 53 d after sowing. In using the present experimental data, meteorological conditions and chemical and physical forms of iodine need to be carefully considered.

• Archives of Plastic Surgery
• /
• v.37 no.4
• /
• pp.415-420
• /
• 2010

Purpose: Heterotopic calcification is a pathological event in which deposits of calcium salts build up, usually in the joint area or soft tissues. It can occur under many conditions and in some rare cases may develop in burn scars. In particular, ulcerations in burn scars accompanied by heterotopic calcification are difficult to treat through conservative treatment. This study reports methods for accurate diagnosis and adequate treatment of ulceration in burn scars accompanied by heterotopic calcification. Methods: Fourteen patients who visited our hospital from March 2008 to January 2010 were subjected to this study. Their sex, age, modes of burn, degree, TBSA (%), ulcerated area, the time of occurrence of the ulcerations in the burn scars were investigated. In addition, radiological examination and biopsy was performed to diagnose heterotopic calcification. Results: Among the 14 cases, 6 were male and 8 were female. The average age of the patients was 48.2 (27 - 69 yrs). As for the mode of burn, 11 were flame burns and 3 were scalding burns. The average time of occurrence of the ulcerations in the burn scars was 4.5 months. The ulcerated areas were situated in the legs in 12 cases, arms in 1 case, and torso in 1 case. The diagnosis was confirmed through X-ray and biopsy, and skin graft was performed after wide excision. Conclusion: Diagnosis of the ulceration in burn scars accompanied by heterotopic calcification is possible through radiological and pathologic studies. Surgical treatment is the most reliable method of treatment, and we chose to perform skin graft after wide excision. Also, we learned that the complete removal of the calcified tissue and the inflammatory fibrotic tissues is crucial in preventing recurrence. Also, in contrast to Marjolin's ulcer, heterotopic calcification had a small size, little or no granulation tissue, and lacked fungating type ulceration. Therefore, favorable prognosis could be achieved through adequate treatment.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.12 no.1
• /
• pp.11-20
• /
• 2008

In probabilistic seismic analysis of nonlinear structural system, dynamic analysis is performed to obtain the distribution of the response estimate using input ground motion time histories which correspond to a given seismic hazard level. This study investigates the differences in the distribution of the responses and the failure probability according to input ground motion models. Two types of input ground motion models are considered: real earthquake records scaled to specified intensity level and artificial input ground motion fitted to design response spectrum. Simulation results fir a nonlinear SDOF system demonstrate that the spectrum matched input ground motion produces larger failure probability than those of scaled input ground motion due to biased responses. Such tendency is more remarkable in the site of soft soil conditions. Analysis results show that such difference of failure probability is due to the conservative estimation of design response spectrum in the range of long period of ground motion.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.6
• /
• pp.628-638
• /
• 2017

In response to difficult employment conditions in the maritime industry and a desire to expand their career options, domestic mates are persuing DP operator training at institutions both domestically and abroad based on their shipboard experience. However, since the offshore plant service industry has not yet been established in Korea, those seeking to enter this field have difficulty acquiring qualifications and most seek work overseas for offshore shipping companies. Individuals wishing to work as DP operators are likely to face more conservative recruitment processes with overseas offshore shipping companies, focusing on career language restrictions as they will be non-native speakers relative to the foreign company, difficulty living in a multi-cultural environment, and lack of systematic information on essential job requirements. For these reasons, domestic mates have difficulty seeking jobs. Therefore, this study analyzes the capabilities and qualification required to be a DP operator to provide basic data for developing NCS standards representing a minimum level of competency. These standards can be applied by the government to develop plans for professional training for DP operators. In study, job classifications, competency standards and career development paths for DP operators have been proposed along with joint use of DP training vessels, to train specialized DP instructors. An NCS export model led by the government to activate professional training for DP operators is also presented.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.16 no.4
• /
• pp.441-454
• /
• 2018

Since the permanent shutdown of Kori Unit 1 in 2017, a full-scale decommissioning project for a commercial nuclear reactor has been approaching. It is estimated that about 160,000 t of low-activity concrete waste will be produced from decommissioning of one unit of this commercial nuclear power reactor. Accordingly, it is necessary to review whether the effectiveness of the current regulatory framework for clearance waste (i.e. waste stream that meets activity concentration guidelines or dose criteria for clearance set forth in NSSC Notice No. 2017-65) can be maintained for the clearance of a bulk amount of concrete waste. In this regard, the IAEA SRS No. 44, which was used as a basis for revision of the Korean clearance regulations, is thoroughly analyzed and the radiological effects from four different clearance scenarios, along with input values and parameters derived from industrial practices in Korea, were evaluated. Though it is shown that the maximum annual dose from most recycling scenarios will be less than the clearance dose criterion for the normal scenario (i.e. an order of magnitude of $0.01mSv{\cdot}y^{-1}$), the radiation dose, estimated with conservative assumptions for the banking scenario, may exceed the above clearance dose criteria. Therefore, for safe and sustainable clearance of the bulk amount of concrete waste, it is required to diversify the concrete waste processors, perform more detailed site-specific assessment, and apply limiting conditions to the banking scenario.