• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 춘계학술대회
• /
• pp.578-580
• /
• 2013

최근 스마트 디바이스의 증가에 따라 개인이 휴대하는 장치가 증가하고 있으며, 대부분의 스마트 디바이스에는 블루투스가 기본사양으로 탑재되고 있다. 그러나 블루투스 장치의 연결 제한으로 다중연결을 활용한 서비스 제공은 미흡한 상태이며, 다중연결이 가능하더라도 설정된 장치가 모두 접속되어야 데이터 통신이 가능한 문제점이 존재한다. 본 논문에서는 이러한 문제점을 해결하기 위한 방안으로 AT Command를 활용한 TDM(time division multiplexing) 방식의 다중연결 알고리즘을 제안하였다. 시뮬레이션을 통해 다수의 장치가 실시간 접속 및 데이터 전송이 가능하다는 것을 확인하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.922-925
• /
• 2004

Bluetooth technology is essentially a method for wireless connection of a diverse set of devices ranging from PDAs, mobile phone, notebook computers, to another equipments. The bluetooth system supports both point-to-point connection and point-to-multipoint connections. In point-to-multipoint connection, the channel is shared among several bluetooth devices. Two or more devices sharing the same channel form a piconet. There is one master device and up to seven active slave devices in a piconet. The radio operates in the unlicensed 2.45GHz ISM band. This allows users who travel world-wide to use bluetooth equipments anywhere. Since the link is based on frequency-hop spread spectrum, multiple channels can exist at the same time. The Bluetooth standard has been suggested that Bluetooth equipments can be used in the short-range, maximum 100 meters . It has been defined that the time takes to setup and establish a bluetooth connection among devices is 10 seconds. It is a long time and may be a cause to lose a chance of finding other non-fixed devices. We propose a routing protocols for scatternets which can be used to control a mobile units(MUs) in this network. The proposed routing protocol is composed of two kinds of bluetooth information, access point(AP) and MU.

• 제어로봇시스템학회논문지
• /
• 제10권11호
• /
• pp.1052-1057
• /
• 2004

Bluetooth technology is essentially a method for wireless connectivity of a diverse set of devices ranging from PDAs, mobile phone, notebook computers, to another equipments, The bluetooth system both point-to point connection and point-to multipoint connection. In point-to multipoint connection, the channel is shared among several bluetooth devices. Two or more devices sharing the same channel form a piconet. There one master device and up to seven active slave devices in a piconet. The radio operates in the unlicensed 2.45GHz ISM band. This allows users who travel world-wide to use bluetooth equipments anywhere. Since the link is based on frequency-hop spread spectrum, multiple channels can exist at the same time. The bluetooth standard ha s been suggested that bluetooth equipments can be used in the short-range, maximum 100 meters. It has been defined that the time takes to setup and establish a bluetooth connection among devices is 10 seconds. It is a long time and may be a cause to lose a chance of finding other non-fixed devices. We propose a routing protocols for scatternets which can be used to control a mobile units(MUs) in this network. The proposed routing protocol is composed of two kinds of bluetooth information, access point(AP) and MU.

• International journal of advanced smart convergence
• /
• 제7권3호
• /
• pp.101-109
• /
• 2018

In this paper, we propose an adaptive filtering scheme of connection requests for the defense of malicious energy consumption attacks against wireless computing devices with limited energy budget. The energy consumption attack tries to consume the battery energy of a wireless device with repeated connection requests and shut down the wireless device by exhausting its energy budget. The proposed scheme blocks a connection request of the energy consumption attack in the middle, if the same connection request is repeated and its request result is failed continuously. In order to avoid the blocking of innocuous mistakes of normal users, the scheme gives another chance to allow connection request after a fixed blocking time. The scheme changes the blocking time adaptively by comparing the message arriving ate during non-blocking period and that during blocking period. Evaluation shows that the proposed defense scheme saves up to 94% energy consumption compared to the non-defense case.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 추계학술대회 논문집
• /
• pp.213-217
• /
• 2002

Power devices for high power drivers that need high switching speed (IGCT, HVIGBT) have been continuously developed. However, serial and parallel connections using several much cheaper, lower power capacity of devices than an expensive high power device are very useful methods in the aspect of cost down and high power application. Even the current and voltage unbalance problem is occurred at each devices. This unbalance characteristics are mainly caused by the differences of physical characteristics of each devices and the line inductance (stray inductance) of bus bars that consist of current path. This paper deals simulation analysis of serial connection of IGCTs and parallel connection of IGCTs using physical model of devices. And also, introduces the method to reduce the voltage and current unbalance problem.

• 한국강구조학회 논문집
• /
• 제30권2호
• /
• pp.97-104
• /
• 2018

PHC 파일을 연결하기 위해 수평 및 수직 볼트를 사용한 연결부의 안전성 평가를 유한요소해석을 통하여 수행하였다. 수치해석 모델은 유한요소해석 프로그램인 ABAQUS를 이용하였으며 모든 연결 장치를 3D Solid 모델로 모델링하였다. 볼트 연결부는 ABAQUS에 제시된 Contact 및 Tie 조건에 고려하여 검토하였다. 유한요소해석을 통해 PHC 파일 연결부의 압축, 인장, 휨 및 전단 해석을 수행하였으며, 각 연결 장치에서 발생하는 Von-Mises 응력을 도출하여 볼트연결부의 안전성을 평가하였다.

• 산업기술연구
• /
• 제28권B호
• /
• pp.245-250
• /
• 2008

Recently, mobile devices have supported wireless LAN as well as bluetooth, where the services such as heterogeneous network access and seamless mobility connection are important. Even though the mobility and physical network might be varied, an efficient communication mechanism for the network access and a robust mobility management of mobile devices are needed. In this paper, we design and implement a Bluetooth system with mobile LAN access capability. The proposed system has the following features; 1) IP connection is enabled by BENP in the link layer, 2) The networks devices of heterogeneous mobile devices are integrated into a single virtual network interface, 3) IP mobility between the bluetooth and wireless LAN is supported by mobile IP. The experimented results show that the packet loss and delay time during the handover duration is reduced by predicting the handover among different networks followed by the setup of any required parameters in advance.

• 한국멀티미디어학회논문지
• /
• 제19권8호
• /
• pp.1479-1486
• /
• 2016

According to the advancement of display devices, the multi-screen contents display environment is growing to be accepted for the display exhibition area. The objectives of this research are to find communications technology and to design an editor interface of contents delivery system for the larger and adaptive multi-display workspaces. The proposed system can find existence of display devices and get information without any additional tools like marker, and can recognize device layout with only web-cam and image processing technology. The multi-display contents delivery system is composed of devices with three roles; display device, editor device, and fixed server. The editor device which has the role of main control uses UPnP technology to find existence and receive information of display devices. extract appointed color in captured picture using a tracking library to recognize the physical layout of display devices. After the device information and physical layout of display devices are connected, the content delivery system allows the display contents to be sent to the corresponding display devices through WebSocket technology. Also the experimental results show the possibility of our device connection and layout recognition techniques can be utilized for the large spaced and adaptive multi-display applications.

• 대한전기학회논문지
• /
• 제41권3호
• /
• pp.237-243
• /
• 1992

The large value of the snubber capacitor is needed to protect the devices in high voltage converters using series connected power semiconductors. But that results in more losses and longer commutation time. So, new technique of series connection is required, which can minimize the value of snubber capacitor and also promote the reliability of high voltage converters. We study on the switching characteristics of series connected power semiconductors and then propose a novel switching algorithm for series-connection which is able to implement not only the dynamic voltage balancing in spite of the differerce of switching characteristics, but the minimization of the value of snubber capacitor, through the change of the value of snubber capacitor by Miller effect. Finally, we illustrate the validity of this synchronization by computer simulation and experimental results.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권11호
• /
• pp.498-502
• /
• 2005

The objectives of this paper are to provide information on the characteristics of the discharge signals in a low-voltage indoor outlet. Most of electrical fires are caused by short circuits, overheating of wires, deterioration and incomplete connection of wiring devices. The last two cases are predictable before the occurrence of fire because of its slow progress. We have simulated the discharge signals caused by the deterioration and incomplete connection of wiring devices using aged outlets. From the experimental data, we could characterize the frequency spectrums of the discharge signals depending on the cases. The higher frequency components of the signal are attenuated by the capacitance and inductance of power lines as the measuring point is getting away from the discharges. Main frequency components of the discharge signal are existent at 600kHz - 1.5MHz in incomplete connections and at 210H7z - 8MHz in deteriorations of the outlet.