• Journal of information and communication convergence engineering
• /
• v.8 no.1
• /
• pp.59-63
• /
• 2010

The shortest path between two points inside a simple polygon P is a minimum-length path among all paths connecting them which don't pass by the exterior of P. A linear time algorithm for computing the shortest path in a general simple polygon requires triangulating a given polygon as preprocessing. The linear time triangulating is known to very complex to understand and implement it. It is also inefficient in case that the input without very large size is given because its time complexity has a big constant factor. Two points of a polygon P are said to be L-visible from each other if they can be joined by a simple chain of at most two rectilinear line segments contained in P completely. An L-visible polygon P is a polygon such that there is a point from which every point of P is L-visible. We present the customized optimal shortest path algorithm for an L-visible polygon. Our algorithm doesn't require triangulating as preprocessing and consists of simple procedures such as construction of convex hulls and operations for convex polygons, so it is easy to implement and runs very fast in linear time.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.2
• /
• pp.60-67
• /
• 2006

This paper presents the protection effect of surge protective devices(SPDs) according to the conditions of installations. To propose the effective protection measures of information and communication equipments against lightning surges, actual-sized experiments in relation to the protection effects on the positions of installations of SPDs, the length of branch circuit, the wiring methods, and the materials of conduit, were conducted. The effective method of protecting information and communication equipments from lightning surges is to install SPDs in the vicinity of input terminals of each electronic equipments to be protected. The wiring method of connecting an SPD minimizing the length of leads is desirable when point-to-point wiring is to be used.

• Journal of the Korean Society of Costume
• /
• v.67 no.1
• /
• pp.40-55
• /
• 2017

The current new distribution environment provides the consumers to shop at anytime and any places by using mobile appliances. So, the companies which run the offline-store increase the contact point with the consumer by launching not only online-store but also the mobile application (app). Moreover, they are trying to operate the Omni-channel shopping environment. In order for this research to draw the direction of 'the Omni-Channel Strategy', which is about the changed distribution environment of the domestic fashion enterprise, the following steps were performed. First of all, the term related to 'Omni-Channel' is defined. And then, Example of the 'Omni-Channel' strategy and 'O2O' business in the domestic distributior were researched. Lastly, present condition of the 'Omni-Channel' strategy case of the domestic fashion industry was researched. At the result, the online-stores usually have several brands which can not represent their identities. It is suggested that each online-store according to each brand has their own characteristic identity. And The Omni-Channel strategy of the domestic fashion enterprise that is needed the connection point connecting the on-line and off-line. It is able to allure the customer to the off-line-store.

• Proceedings of the KIPE Conference
• /
• 2003.11a
• /
• pp.238-243
• /
• 2003

The solar cells should be operated at the maximum power point because its output characteristics are greatly fluctuated on the variation of insolation, temperature and load. The output power of solar cell is DC, therefore it is necessary to install an inverter among electric power converts. The inverter have to supply a sinusoidal current and voltage to the load and the interactive utility line. In the paper, the proposes a photovoltaic system designed with a step up chopper and single phase PWM voltage source inverter. Synchronous signal and control signal was processed by microprocessor for stable modulation. The step up chopper operates in continuous mode by adjusting the duty ratio so that the photovoltaic system tracks the maximum power point of solar cell without any influence on the variation of insolation and temperature because solar cell has typical dropping character. The single phase PWM voltage source inverter consists of complex type of electric power converter to compensate for the defect, that is, solar cell cannot be developed continuously by connecting with the source of electric power, from 10 to $20\%$. The single phase PWM voltage source inverter operates in situation that its output voltage is in same phase with the utility voltage. The inverter supplies an ac power with high factor and low level of harmonics to the load and the utility power system.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.4 no.1
• /
• pp.24-27
• /
• 1977

The Author measured the position of the mandibular foramen with oblique cephalography in 43 5-aged, and 44 7-aged Korean children. The results of the studies were as follows; 1) The distance from the post. occlusal plane to the mandibular foramen was $3.16{\pm}1.22mm$. in age 5 and $1.86{\pm}1.50mm$. in age7 to the below. 2) The meeting point of the occlusal plane and anterior of the ramus to the mandibular foramen was $16.56{\pm}2.18mm$. in age5 and $16.88{\pm}2.69mm$. in age7. 3) The angulation between the occlusal plane and the line connecting the mandibular foramen and the meeting point of anterior border of the ramus with occlusal plane was $12.70{\pm}4.31^{\circ}$ in age5 and $8.27{\pm}5.36^{\circ}$ in age7 to the below. 4) % depth was $56.93{\pm}5.65%$ in age 5 and $53.20{\pm}7.12%$ in age 7. 5) The price of distance and angulation showed significant results at 0.01 level in KOLMOGOROV-SMIRNOV (TWO-SAMPLE) TEST.

• Transactions of Materials Processing
• /
• v.27 no.1
• /
• pp.54-59
• /
• 2018

In connecting parts of a hydrogen fuel cell vehicle, since the rubber ring is permeable to hydrogen, it is necessary to use a metal sealing structure which ensures leakage stability. Finite element analysis was performed to verify the fitting characteristics of the metal sealing structure, which is used to connect the pipe to a high pressure hydrogen FCEV tank. Deformation shape, contact distance and axial load were compared experimentally and these values were in agreement with each other. In the contact surface, between the pipe and the fitting body, the stress at the edge of the contact surface was higher than the center point, which was considered to be a good characteristic in view point of the leakage. The location of the contact points has almost no change in the upper part of the fitting, but that of the lower parts move downward as the fastening amount increases. The contact pressure at the lower part is maintained at the same constant level.

• Korean Journal of Artificial Intelligence
• /
• v.9 no.2
• /
• pp.23-28
• /
• 2021

In this paper, we studied a system that can efficiently build security management for single-person households using Arduino, ESP32-CAM and PIR sensors, and proposed an Android app with an internet connection. The ESP32-CAM is an Arduino compatible board that supports both Wi-Fi, Bluetooth, and cameras using an ESP32-based processor. The PCB on-board antenna may be used independently, and the sensitivity may be expanded by separately connecting the external antenna. This system has implemented an Arduino-based Unauthorized intrusion system that can significantly help prevent crimes in single-person households using the combination of PIR sensors, Arduino devices, and smartphones. unauthorized intrusion system, showing the connection between Arduino Uno and ESP32-CAM and with smartphone applications. Recently, if daily quarantine is underway around us and it is necessary to verify the identity of visitors, it is expected that it will help maintain a safety net if this system is applied for the purpose of facial recognition and restricting some access. This technology is widely used to verify that the characters in the two images entered into the system are the same or to determine who the characters in the images are most similar to among those previously stored in the internal database. There is an advantage that it may be implemented in a low-power, low-cost environment through image recognition, comparison, feature point extraction, and comparison.

• Journal of Soil and Groundwater Environment
• /
• v.27 no.1
• /
• pp.50-59
• /
• 2022

There are several methods for separating the baseflow from the hydrograph, and graphical methods (GM) have mostly been used. GMs are those that separate the baseflow from the direct flow simply by connecting rising point with inflection point or points related to some duration from a hydrograph. Environmental tracer method (ETM) is another tool researched and developed under several conditions to estimate the groundwater recharge. The goal of this study is to separate the baseflow component from a storm hydrograph by applying various GMs and ETM, and to compare their results. The baseflow component estimated by ETM was different from the results by GMs in terms of their shapes of fluctuation and flow rates. Another important feature is that the form of the baseflow to which ETM is applied is similar to that of a storm hydrograph. This similarity is presumed to be due to the selection of tracer that respond quickly to rainfall.

• Current Optics and Photonics
• /
• v.7 no.3
• /
• pp.273-282
• /
• 2023

This paper presents a new method for redistributing effectively the first orders of each lens element to achromatize and athermalize an optical system, by introducing a novel method for adjusting the slope of an achromatic and athermal line. This line is specified by connecting the housing, equivalent single lens, and aberration-corrected point on a glass map composed of available plastic and glass materials for molding. Thus, if a specific lens is replaced with the material characterized by the chromatic and thermal powers of an aberration-corrected point, we obtain an achromatic and athermal system. First, we identify two materials that yield the minimum and maximum slopes of the line from a housing coordinate, which specifies the slope range of the line spanning the available materials on a glass map. Next, redistributing the optical first orders (optical powers and paraxial ray heights) of lens elements by moving the achromatic and athermal line into the available slope range of materials yields a good achromatic and athermal design. Applying this concept to design a mobile-phone camera lens, we efficiently obtain an achromatic and athermal system with cost-effective material selection, over the specified temperature and waveband ranges.

• Korean Journal of Food Science and Technology
• /
• v.23 no.2
• /
• pp.157-160
• /
• 1991

Copper constantan thermocouples connecting to a recording potentiometer were inserted at the center of the patties and the samples were fried. In general, the internal temperature of the patty samples increased approximately $11.1^{\circ}C$ after the samples were removed from the fryer. The desired internal temperature and maximum internal end-point temperature, at different frying temperatures, can be obtained by adjusting the frying time. The yields of the patties decreased as maximum internal end-point temperature increased or as frying time increased. The internal temperature and maximum internal end-point temperature of the patty samples at three frying temperatures were predicted using polynominal regression of a third-order model with one independent variable, frying time. Polynominal regression of a second-order model with maximum internal end-point temperature as the independent variable was used to predict frying yields at three frying temperatures.