• Journal of Digital Convergence
• /
• v.15 no.9
• /
• pp.23-33
• /
• 2017

Given the expansion of globalization and international trade, the number of apparel consumers is growing every year, making it difficult to estimate the amount of handling needed from the logistics industry. To determine which management factors are important and which ones require improvement, fuzzy AHP was used. Using this method, the factors were ranked in the final analysis as follows: The first and most important factor was training employees (0.17), while the second was fire hazard management (0.169); the third-highest factor was inbound and outbound goods (0.142), and the fourth was the warehouse management system. Barcode management was ranked fifth. By these results, we were able to analyze the processes of clothing warehouses, noting that although the factors appear independent, they are actually connected while proceeding with full management control. Moreover, because of the special characteristics of garments, employee management is crucial. Due to the vulnerability of these goods to fire hazards, this factor must be well managed.

• Journal of Welding and Joining
• /
• v.27 no.4
• /
• pp.54-59
• /
• 2009

In the process to manufacture for metallic structures, control of welding deformation is one of an important problems connected with reliability of the manufactured structures so that welding deformation should be measured and controlled with quickly and actively. Also, welding parameters which have as lot of effects on welding deformation such as arc voltage, welding current and welding speed can also be controlled. The objectives for this study were to develop a simple 2-D FEM to calculate not only the transient thermal histories but also the sizes of fusion and heat-affected zone (HAZ) in multi pass arc welds including the butt and fillet weld type with dissimilar thickness, and to concentrate on a developed model for the finding the parameters of Godak's moving heat source model based on a GA. The developed model includes a GA program using MATLB and GA toolbox, and a batch mode thermal model using ANSYS software. Not only the thermal model was verified by comparison with Goldak's work but also the developed model was validated with molten zone section experimental data.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.172-172
• /
• 2016

The International Maritime Organization(IMO) adopted the International Convention for the Control and Management of Ships' Ballast Water and Sediments in 2004 to prevent the transfer of aquatic organisms via ballast water. Forty ballast water treatment systems were granted final approval. A variety of techniques have been developed for ballast water treatment including UV treatment, indirect or direct electrolysis, ozone treatment, chemical compounds and plasma-arc method. In particular, using plasma and ozone nano-bubble treatments have been attracted in the fields. However, these treatment systems have a problem such as remained toxic substance, demand for high power source, low efficiency, ets. In this paper, we present our strilization results obtained from membrane type electrolytic-reduction treatment system The core of an electrolysis unit is an electrochemical cell, which is filled with pure water and has two electrodes connected with an external power supply. At a certain voltage, which is called critical voltage, between both electrodes, the electrodes start to produce hydrogen gas at the negatively biased electrode and oxygen gas at the positively biased electrode. The amount of gases produced per unit time is directly related to the current that passes through the electrochemical cell. From the results, we could confirm the sterilization effect of bacteria such as S. aureus, E. Coli and demonstrate the mechanism of sterilization phenomena by electrolytic-reduction treatment system.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.2
• /
• pp.95-103
• /
• 2002

We know that the all of warfare system has been becoming complex and variety in warfield thru the Gulf-War. The all of warfare electronic systems is designed to inter-operate by networks in recently. Especially Warfare Equipment systems of Men-of-War(War ship) as like KDX(Korea Destroyer, Experimental), FF(Frigate), PCC(Costal Patrol Craft), Submarine are connected by Combat System Databus to the Command system(C2 System), so C2 system can control all of equipments in ship. In this view, the status of network(Combat System Databus) is very critical parameter in war field. So In this paper, we propose the method of Network Management System construction for War ship, and especially propose the architectural design of network management system for DX(Destroyer, Experimental) equipments using SNMP(Simple Network Management Protocol). And Link Utilization is monitored by simulation. 

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.6B
• /
• pp.683-688
• /
• 2011

Current is change to concept that management traffic of ship os magnified gradually to near shore waters from harbor. Therefore, introducing the technology of AIS in the ground station, lighthouse, bouy, sea facilities etc.. that is support equipment for safety sailing of ship and safety security of harbor and ship administration. The operation and maintenance of AIS for aids to navigation are required to efficient method. With this actuality, sea advanced nation of EU, USA, Japan that has been apply for developing AtoN AIS equipment that is connected equipment of technology standard in IALA. Because of it is expected to depend equipment in income, that is required to domestic technology of the AtoN AIS. This paper is targeted to development that is suitable automation AtoN AIS equipment in environmental peculiarity for constructor AtoN operating administration center. It has been realization send protocol for information interchange.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.3
• /
• pp.250-257
• /
• 2011

This paper analyzes characteristic of the three-phase coupled inductor connected to ac source to effectively mitigate the high-frequency circulating current generated in parallel three-phase boost converters. The three-phase coupled inductor analysis presented in this paper uses the three-phase coupled inductor structure and voltage equations. Based on this analysis, the three-phase coupled inductor is added to the conventional low-frequency averaged model. As a result, the novel averaged model which can reduce the low and high-frequency circulating current simultaneously is developed. Using the zero-sequence component of the novel averaged model, each total inductance to the circulating current of the three-phase coupled inductor and line inductor can be obtained. Simulation and experiment results verify the usefulness of three-phase coupled inductor in parallel three-phase boost converters.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.10
• /
• pp.2066-2070
• /
• 2009

A voltage controlled attenuator using a PIN diode and two resistors of the $\pi$-type fixed attenuator is described in this paper. The proposed variable attenuator operating for a fixed attenuation range has a good input VSWR and a low intermodulation signal. For the low phase shift, a PIN diode is connected with open stub for the purpose of phase compensation. The stub for phase compensation is calculated by the Deloach method and the related circuit theory. This attenuator is easily fabricated on the microstrip and can be normally used in fine control circuits within small attenuation range. The fabricated attenuator for 2110~2170 MHz frequency band has about 4 dB of an attenuation range, $2^{\circ}$ of phase variance, and -20 dB of S11 according to the input voltage from 0 to 2.7 V.

• Proceedings of the KIEE Conference
• /
• 2004.11b
• /
• pp.190-193
• /
• 2004

Optimal Power Flow (OPF) is becoming more and more important in the deregulation environment of power pool and there is an urgent need of faster solution technique for on-line application. So this paper presents parallel genetic algorithm-tap search for the solution of the OPF. The control variables modeled unit active power outputs, generator-bus voltage magnitudes and transformer-tap settings. A number of functional operating constraints, such as branch flow limits, load bus boltage magnitude limits and generator reactive capabilities are included as penalties in the fitness function. In parallel GA-TS, GA operators are executed for each process. If best fitness of the GA is not changed for several generations, TS operators are executed for the upper three populations to enhance the local searching capabilities. With migration operation, best string of each node is transferred to the neighboring node after predetermined iterations are executed. For parallel computing, we developed a PC-cluster system consisting of 8 PCs. Each PC employs the 2 GHz Pentium IV CPU and is connected with others through ethernet switch based fast ethernet. To show the usefulness of the proposed method, developed algorithm has been tested and compared on an IEEE 30-bus system in the reference paper. From the simulation results, we can find that the proposed algorithm is efficient for the OPF.

• Journal of Chest Surgery
• /
• v.18 no.4
• /
• pp.822-834
• /
• 1985

Reexpansion of the lung is the most desirable method of filling the pleural space whether it`s contents may be, and closed thoracotomy connected to a water-seal drainage remains the basic therapeutic modality in the treatment of the problems of the pleural space. We usually used rubber mushroom tubes, size No. from 16 to 34 Fr., and performed closed thoracotomy after preliminary thoracentesis to determine the exact depending position. Author reviewed 576 cases of closed thoracotomy which were performed in the Department of Thoracic and Cardiovascular Surgery, Pusan National University Hospital, since Jan., 1980 to June, 1984. The results were as follows: 1. The age distribution was 10 days to 76 years old and mean age of the patients was 36.6 year, and the most prevalent age group was twenties, and sex predisposition was male dominant, 86.9%. 2. The most common etiologic disease group was pneumothorax and the most common etiologic disease was traumatic hemothorax. 3. Sites of tubing were predominantly at posterior axillary line, 7th intercostal space and midclavicular line, 2nd intercostal space even though frequent presence of free pleural space. The two sides, right and left difference of occurrence rate was more frequent at right side, 51.2%. 4. Usually the durations of tubing was less than 10 days, 52.6%, and the number of tubes used to the same patient concomitantly was one, 73.9%, and the time of tubing to the same patient was 1st, 83.6%. 5. The common symptom and sign were dyspnea, 50.0%, chest pain, 30.7%, cough, 10.7%, fever, 6.5%. Especially, fever and cough was the most common symptom and sign in pyogenic empyema, 59.3%. 6. The common etiologic lesions of pneumothorax were blebs and bullae, 73.3%, and of pyogenic empyema was pneumonia, 69.0%. 7. The complication rate of closed thoracotomy was 26.0%. Among these complications, infection was 44.7%, and intercostal neuralgia was 25.3%. 8. 70.9% of all patients recovered with only closed thoracotomy and the rest of patient needed additional some necessary managements such as open thoracotomy [Blebectomy, Resection, Pleurodesis, Decortication, Bleeding control], open drainage, thoracoplasty and so on to have successful results.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.1103-1107
• /
• 2009

Lately, trend is change to concept that management traffic of ship is magnified gradually to near shore waters from harbor. Therefore, introducing the AtoN AIS technology that install AIS in the ground station, lighthouse, bouy, sea facilities etc.. that is support equipment for safety sailing of ship and safety security of harbor and ship administration. The operation and maintenance of AtoN AIS are required to efficient method. With this actuality, sea advanced nation They has been apply for developing AtoN AIS equipment that is connected equipment of technology standard in IALA. Because of it is expected to depend equipment in income, that is required to domestic technology of the AtoN AIS. This paper is targeted to development that is suitable automation AtoN AIS equipment in environmental peculiarity for construnstrunstrAtoN operating administration center. It has been realization the interface module for control and monitoring system and the communications protocol for information interchange.