• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.10
• /
• pp.60-67
• /
• 2005

Modern version of supersonic jet fighter aircraft must have guaranteed appropriate controllability and stability in HAoA(high angle of attack). Limit value of aircraft entering into the deep stall in HAoA is related to aircraft configuration design. But, In order to guarantee the aircraft's safety in HAoA, control law for HAoA region implemented in digital Fly-By-Wire flight control system of supersonic jet fighter. The AoA limiter is designed for positive HAoA in longitudinal control law. But, aircraft departure during aggressive negative pitch maneuver such as push over in departure resistance flight test. Therefore negative AoA limiter is needed in longitudinal control law. Result of T-50 flight test show that the AoA is exceed the limit value during aggressive positive pitch maneuver in pull up of power approach mode. In this paper, the AoA limit control law in positive and negative AoA was proposed in order to improve aircraft controllability and stability.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.11
• /
• pp.1193-1203
• /
• 2008

An active antenna(AA) can have wider bandwidth and more gain with small antenna size than those of passive antennas. However, AA inherently generates thermal noise and spurious signals from an active device. Moreover, the spurious performance of AA is very important in a highly sensitive receiving system since it is located at the front end of the receiving system. In this study, we developed an AA with $100{\sim}500\;MHz$, having the output P1dB higher than 3 dBm and little spurious signals in real environments. To achieve such performance, we designed an AA with 3-stage amplifier using CD(common drain) FET and 2 BJTs. Its electrical performances were simulated using ADS. The measurement results for typical gain, NF, OIP3, VSWR and P1dB in the required frequency band were 9.7 dBi, 10 dB, 14 dBm, 1.7:1 and 3 dBm respectively. They are in good agreement with simulation results. The unwanted spectrum level of the proposed AA is $10{\sim}30\;dB$ lower than that of the antenna with CS(common source) FET configuration at a west suburban area of Seoul, which shows that the proposed AA can be applicable to a highly sensitive receiving system for detecting unknown weak signals mixed with broadcasting and civilian communication signals.

• Korean Journal of Optics and Photonics
• /
• v.13 no.4
• /
• pp.347-355
• /
• 2002

We have constructed a high efficiency and broad tunable cw Ti:sapphire laser with a four-mirror symmetric Z-type laser cavity to increase the laser usability. From theoretical analyses and experimental data for a symmetric Z-type laser cavity containing a Kerr medium, the cavity mode size and the Kerr-lens mode-locking (KLM) strength for KLM lasers can be confirmed as function of the position in the cavity, the intracavity laser power, and the stability parameter. As a result, the slope efficiency and the maximum average output power of cw Ti:sapphire laser at 5 W pumping power of Ar-ion laser were 31.3% and 1420 ㎽ respectively. The tunablility was ranged from 730 ㎚ to 908 ㎚ with average output power above 700 ㎽. We obtained the KLM operation easily by self-aperturing effect in the Kerr medium and the slope efficiency and the maximum average output power of KLM Ti:sapphire laser was 16% and 550 ㎽ respectively. The spectral bandwidth was 33 ㎚ at the center wavelength of 807 ㎚ and the pulse width was 27 fs with a repetition rate of 82 ㎒.

• Journal of Korea Multimedia Society
• /
• v.2 no.1
• /
• pp.69-79
• /
• 1999

We have implemented the telecommunication management functions based on TMN (Telecommunications Management Network) architecture that is standardized by ISO/ITU-T. TMN has been developed to manage heterogeneous networks, services and equipment. In this paper, we first analyze the detailed functions of EMS (Element Management System) that performs core functions in the subnetwork management of TMN architecture. We propose an implementation method of EMS for efficient subnetwork management and verify its performance and functionality through detailed implementation and various testing. The proposed EMS consists of EML-Manager module and NML-Agent module. The EML-Manager module controls NEL (Network Element Layer) through the CMIP operations on the managed-objects. The NML-Agent module processes the requests from NMS (Network Management System) in upper layer. We have implemented NMS that performs only the NML-Manager function to test the proposed EMS, and we have used NE-Agent that was designed and implemented by the B-ISDN Lab. of Yeungnam University. The implemented EMS has three management functions: configuration management function, performance management function, and fault management function. We confirmed that the EMS operated normally as we tested the EMS. As further research works, the implementation of NMS with both NML-Manager function and SML-Agent function is required.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.11
• /
• pp.130-135
• /
• 2019

This study performed the quality improvement of a red dot sight for a 40 mm grenade launcher through parallax reduction. The red dot sight cited in this study is currently in mass production for military use as a non-weapon system. While the red dot sight's parallax currently meets requirements, slightly greater error was observed on the outside of effective optical area of the reflection lens compared to other sights. Parallax is easily affected by eye movement, which can result in aiming error. To improve the red dot sight's quality, this study analyzed why parallax is observed in the effective optical area of the reflection lens and how to reduce it. As a result, the red dot sight demonstrated lower parallax error using the new optical system design with an increased reflection lens thickness and modified components configuration related to the reflection lens assembly. Parallax was calculated and simulated by using a particular program to verify that it decreased. This improvement for the 40 mm. grenade launcher red dot sight more than satisfies requirements, offers advanced capabilities for users, and as a result, successful operation carryout.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.5
• /
• pp.93-107
• /
• 2018

The concepts of geotourism and geoparks have emerged due to the paradigm shift in tourism and the increased recognition of geosites and geoheritage as legacies that must be protected and preserved. The number of geoparks designated by UNESCO and national governments is increasing globally. The purpose of this paper is to propose directions for enhancing Jeju Geopark to perform as a geological educational venue. This study reviewed the present conditions of the education and communication, the media, and the facilities of the geopark with respect to the required conditions to be effective for geological education. Data surveys, field surveys, visitor questionnaires, and interviews were conducted to examine the educational and guidance system of the geopark, the physical space configuration, and the operation and management methods. The research process is as follows. First, the study analyzed the status of the education and communication in Jeju Geopark, according to the criteria of the UNESCO GGN, using data acquired from the survey. Second, the study analyzed and evaluated the educational and communication facilities, and media, focusing on four aspects of the geopark: the geo-trail, spatial composition and layout, communicational and educational facilities, and the system and design of signboards. Third, the study assessed the perception and satisfaction of visitors to the geopark. Fourth, the study summarized the potential and limitations of the Jeju Geopark through in-depth interviews. The four analyses showed that enhancements in the exploration environment, communication, media, and operation and management system are all necessary for effective geological education. Based on these results, this study suggests directions for enhancing the geopark in the four following aspects. Management and maintenance must be improved to meet UNESCO criteria, while the improvements in the visiting environment quality, the supplementing of communication and facilities, and enhancements in the organization and system of operation and management also must be taken on.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.1
• /
• pp.726-734
• /
• 2015

Relational databases used by structuralizing data are the most widely used in data management at present. However, in relational databases, service becomes slower as the amount of data increases because of constraints in the reading and writing operations to save or query data. Furthermore, when a new task is added, the database grows and, consequently, requires additional infrastructure, such as parallel configuration of hardware, CPU, memory, and network, to support smooth operation. In this paper, in order to improve the web information services that are slowing down due to increase of data in the relational databases, we implemented a model to extract a large amount of data quickly and safely for users by processing Hadoop Distributed File System (HDFS) files after sending data to HDFSs and unifying and reconstructing the data. We implemented our model in a Web-based civil affairs system that stores image files, which is irregular data processing. Our proposed system's data processing was found to be 0.4 sec faster than that of a relational database system. Thus, we found that it is possible to support Web information services with a Hadoop-based big data processing technique in order to process a large amount of data, as in conventional relational databases. Furthermore, since Hadoop is open source, our model has the advantage of reducing software costs. The proposed system is expected to be used as a model for Web services that provide fast information processing for organizations that require efficient processing of big data because of the increase in the size of conventional relational databases.

• Composites Research
• /
• v.13 no.2
• /
• pp.30-39
• /
• 2000

It is difficult for civil engineer to apply composite materials of laminated type to structure for civil construction because of complicated theory although those have much merit. A simple method by which one can predict "exact" values of the natural frequency of vibration of laminated plates is presented. Many laminates with particular orientations have negligible values of $B_{16}$ and $B_{26}$ as the number of plies increases. Such laminates, with $D_{16}$ = $D_{26}$ ->0 can be solved by the same equation as for the special orthotropic laminates(1991,1995). If the quasi-isotrpic constants are used, It is possible to simplify analysis procedure since the equations for isotropic plates can be used. Use of some coefficients can produce "exact" values for laminates with such configuration. This coefficient, in fact, represents the effect of the anisotropy of the laminate. D. H. Kim proposed to use a correction factor, he developed, to produce "exact" solution out of the approximate solution obtained by using the quasi-isotropic constants(1995). In this paper, the fiber orienation studied is [$\alpha$/$\beta$/$\beta$/$\gamma$/$\alpha$/$\alpha$/$\beta$]r, with $\alpha$=-$\beta$, and $\gamma$${\gamma}$=$0^{\circ}$ or $90^{\circ}$ and the above-mentioned method is used to obtain the natural frequencies of plates with such orientations, and detailed result is presented for the use of engineers.nted for the use of engineers.

• Journal of Biomedical Engineering Research
• /
• v.28 no.3
• /
• pp.397-409
• /
• 2007

Owing to needs of biomechanical comprehension and analysis to obtain various medical treatment designs which are related with the spine in order to cure and diagnose LBP patients, the FE modeling and nonlinear analysis of lumbosacrum including a partial ilium and iliolumbar ligaments, were carried out. First, we investigated whether the geometrical configuration of vertebrae displayed by DICOM slice files is regular and normal condition. After constructing spinal vertebrae including a partial ilium, a sacrum and five lumbars (from L1 to L5)with anatomical shape reconstructed using softwares such as image modeler and CAD modeler, we added iliolumbar ligaments, lumbar ligaments, discs and facet joints, etc.. And also, we assigned material property and discretized the model using proper finite element types, thus it was completely modeled through the above procedure. For the verification of each segment, average sagittal ROM, average coronal ROM and average transversal ROM under various loading conditions(${\pm}10Nm$), average vertical displacement under compression(400N), ALL(Anterior Longitudinal Ligament) and PLL(Posterior Longitudinal Ligament) force at L12 level, strains of seven ligaments on sagittal plane at L45 level and maximal strain of disc fibers according to various loading conditions at L45 level, etc., they were compared with experimental results. For the verification of multilevel-lumbosacrum spine including partial ilium and iliolumbar ligaments, the cases with and without iliolumbar ligaments were compared with ROM of experiment. The results were obtained from analysis of the verified FE model as follows: I) Iliolumbar ligaments played a stabilizing role as mainly posterior iliolumbar ligaments under flexion and as both posterior and anterior iliolumbar ligaments of one side under lateral bending. 2) The iliolumbar ligaments decreased total ROM of 1-8% in total model according to various motion conditions, which changed facet contact forces of L5S level by approximately 0.8-1.4 times and disc forces of L5S level by approximately 0.8-1.5 times more than casewithout ilioligaments, under various loading conditions. 3) The force of lower discs such as L45 and L5S was bigger than upper discs under flexion, left and right bending and left and right twisting, except extension. 4) It was predicted that strains of posterior ligaments among iliolumbar ligaments would produce the maximum 16% under flexion and the maximum 10% under twisting. 5) It's expected that this present model applies to the development and design of artificial disc, since it was comparatively in agreement with the experimental datum.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.3
• /
• pp.290-294
• /
• 2018

Modern warfare exhibit a NCW (Network Centric Warfare) aspect through quick situation awareness and Command and Control. And Tactical messages operate on various tactical data links (TDLs). For monitoring TDL messages processed by data link processor(DLP), message analysers are generally developed as a component during system development. In addition, in order to forward TDL messages processed by DLP to the message anayzer, the interface messages between DLP and message analysers should be defined interface control document(ICD). We propose the methods using UDP or TCP packets provided by TDL layers that are delivered to DLP without communicating directly with DLP. Depending on TDL message standards and Interface Control Documents(ICDs), we design the message analyzer which communicates with data link processor using internal messages. Using known header field information from the TDL application standard such as JREAP-C, we can quickly filter candidate packets against collected packets and use the full data size information contained in the headers to verify the completed message. Because the methods proposed in this paper do not communicate directly with DLP, the methods proposed in this paper are enable to analyze the TDL application messages such as JREAP-C or Link-K without constraints in existing methods that should be reflected in the system configuration and ICD.