• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1999년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.43-47
• /
• 1999

In this paper, we describe the configuration of the KITSAT-3 image data receiving, archiving, processing and distribution system in operation. Following the low-cost and software-based design concept, the whole system is composed of three PCs : two for data receiving, archiving and processing which provide a full dual-redundant configuration and one for image catalog browsing which can be accessed by public users. Except that receiving and archiving PCs have serial data ingest boards plugged in, they are configured by general peripherals. This basic and simple hardware configuration made it possible to show that a very low cost system can support a full ground operation for the utilization of high-resolution satellite image data.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.64-68
• /
• 2004

Design of manufacturing system is a very complicated and tricky process. Since no efficient method has been known, yet it has been mainly done based on experience and heuristics. Even mostly used simulation approaches can only evaluate the performance of an already configured system, but cannot provide a help to configure or reconfigure a manufacturing system. An efficient way to (re-)configure manufacturing systems might be to use building blocks of a manufacturing system in the similar manner the recent products are configured based on modular principle. In this paper, the concept of a building block and its representation method are described. An example of assembly system configuration is also given.

• 한국정보처리학회논문지
• /
• 제3권4호
• /
• pp.709-719
• /
• 1996

DHCP는 호스트에게 IP(Internet Protocol) 주소나 구성 파라미터 (Configuration Parameter) 등을 동적으로 할당해주는 프로토콜이다. 그러나 이프로토콜은 메시지를 교환하기 위해 브로드캐스팅을 이용하기 때문에 네트워크에 과중한 트래픽의 발생 요인이 된다. 이러한 오버헤드를 줄이기 위해 메시지 교환시에 가능하면 브로드 캐스 팅을 피하고, 간결하고 효율적인 클라이언트-서버의 동작 메처니즘을 설계하였다. 본 연구에서는 DHCP가 유발하는 브로드캐스팅 트래픽 특성을 고찰하여 메시지를 유치캐스트 할 수 있는 방안과 트래픽을 줄일 수 있도록 알고리즘을 개선한 DHCP의 모델을 구현하였다.

• 한국주거학회논문집
• /
• 제12권4호
• /
• pp.33-43
• /
• 2001

This study had a aim to present a detailed investigation of the difference between the preoccupied and occupied space in the apartment house. In this connection, this study was to analyse the space configuration of the residential space with and without furniture for 3LDK plan in the apartment housing by the comparative method. The space configuration analysis which represents results a numeral and graphical ways is based on the relation between the space and the social changes. The results of this study were as follows; There were a various width of change of the integration value which represented the space configure between the residential space with and without furniture according to the sample plans. It means that the residential space redefine by residence, though the architect design the perfect plan to be considered user.

• 한국전산유체공학회지
• /
• 제8권4호
• /
• pp.26-33
• /
• 2003

Smart UAV Development Program, one of the 21c Frontier R&D Program sponsored by MOST(Ministry of Science and Technology), was launched in 2002 As an air vehicle for the Smart UAV, CRW(Canard Rotor/wing) concept was one of the candidates compared in trade-off study. The CRW concept has not only been proven completely but its aerodynamic characteristics not known in detail yet. Two calculation methods were adopted in this study to obtain aerodynamic data for the CRW First method was the superpose DATCOM method which is capable of three lifting sufaces, and second one is the full Navier-Stokes computation around CRW configuration using overset grid method. Basic aerodynamic characteristics of the CRW configuration was analyzed and the minimum drag level with lift to drag ratio is presented. The peculiar flow characteristics around rotor/wing and hub were also examined and considered in the configuration design.

• 대한기계학회논문집
• /
• 제17권10호
• /
• pp.2611-2623
• /
• 1993

To construct the design back data for a lean-burn gas engine, we investigated the combustion characteristics in the main chamber using a constant volume combustion chamber with subchamber. The combustion characteristics with configuration change of the critical passageholes have been studied by taking pressure data, schlieren photograph, ion current and light emission signal of flame. Heat release rate with various critical passageholes also have been analysed by using the combustion model of a prechamber diesel engine. It was found that combustion characteristics in the main combustion chamber were greatly influenced by the geometric configurations of critical passagehole.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1580-1583
• /
• 2008

We propose an optical configuration for a vertical alignment (VA) liquid crystal (LC) cell to eliminate the off-axis light leakage in the dark state. The proposed compensation configuration consists of a positive A-film, a positive C-film and a negative C-film. The optical design is performed on a Poincar$\acute{e}$ sphere. This configuration has a better tolerance to the wavelength dispersion, as the polarization trace could self-compensate it. From calculations, we show that the proposed VA LC cell can improve the viewing angle characteristics by compensating for the light leakage in the diagonal direction.

• Journal of Information Display
• /
• 제1권1호
• /
• pp.20-24
• /
• 2000

We propose on a novel vertical configuration (VC) for a helix-deformed ferroelectric liquid crystal (HDFLC) display that has fast response, high contrast, analog gray scale capability, and wide-viewing characteristics. In contrast to a conventional HDFLC in a planar geometry, smectic layers arrange themselves parallel to the substrates, and thus, extremely uniform alignment of molecules in large area is naturally achieved in our new configuration without additional processes such as the rubbing and/or electric field treatment. Moreover, with a proper design of electrode patterns on the same substrate, multidomain switching is easily realized without employing any complex process of alignment. Our new VC-HDFLC is expected to provide a viable technology to produce a next-generation large area LCD suitable for processing the dynamic image at a video-rate.

• 한국생산제조학회지
• /
• 제23권2호
• /
• pp.138-144
• /
• 2014

This study investigates the air resistance due to deflector configurations of commonly used largetrucksat a driving speedof 80 km/h. Of the 6 models that are considered, the drag causedby the pressure on the front part of the trailer is largest for model 1. For model 1, the lift caused by the difference between the velocities of the upper and lower streams isgreatest amongall the models. Model 6 has the least resistance against the flow stream consideringthedrags and lifts of theflow models. Anoptimal design can be obtainedby investigating thesimulation analysis ofvarious deflector configurationsfor the upper part of largetrucks; this optimum deflector configuration will help reduce the air resistanceon large trucks.

• Journal of Mechanical Science and Technology
• /
• 제18권12호
• /
• pp.2148-2157
• /
• 2004

The paper deals with the vibration and dynamic stability of cantilevered pipes conveying fluid on elastic foundations. The relationship between the eigenvalue branches and corresponding unstable modes associated with the flutter of the pipe is thoroughly investigated. Governing equations of motion are derived from the extended Hamilton's principle, and a numerical scheme using finite element methods is applied to obtain the discretized equations. The critical flow velocity and stability maps of the pipe are obtained for various elastic foundation parameters, mass ratios of the pipe, and structural damping coefficients. Especially critical mass ratios, at which the transference of the eigenvalue branches related to flutter takes place, are precisely determined. Finally, the flutter configuration of the pipe at the critical flow velocities is drawn graphically at every twelfth period to define the order of the quasi-mode of flutter configuration.