• 대한기계학회논문집B
• /
• 제23권8호
• /
• pp.1031-1039
• /
• 1999

Electrospraying comprises the generation of liquid droplets by applying a high voltage to the surface of a liquid. By monitoring the current and the flow rate it was possible to obtain a stable cone jet mode in a given condition. In this work the liquid contained NaCl particles resolved in distilled water. The NaCl particles increased concentration of the ionized solution and thus increased electrical conductivity of the liquid, which was inversely proportional to the flow rate in the cone jet mode. A number of sprayed droplets were sampled and dried enough, and then the size of NaCl particles were measured. The measured droplet diameter was a little larger than two theoretical diameters, Rayleigh diameter and mobility diameter.

• 한국항공우주학회지
• /
• 제44권1호
• /
• pp.23-32
• /
• 2016

초고속으로 비행하는 물체의 항력을 줄이기 위해 노즈콘으로부터 제트를 분사하는 다양한 연구가 진행되고 있다. 본 연구에서는 항력감소의 기초자료와 핵심 변수를 파악하기 위해서 미국의 항력감소용 분사 제트 연구 동향을 조사하고 요약하였다. 연구에 활용한 노즈콘 모델의 형상은 반구 실린더, 잘린 콘, 재돌입 캡슐이었으며, 각 모델의 시험조건에 대해 정리하였다. 항력감소의 핵심 변수는 분사제트의 마하수, 질량유량, 압력비율이다. 항력감소효과는 주어진 조건에 따라 다양한 결과를 보였지만, 최대 40~50% 정도까지 항력이 감소하였다.

• 정보저장시스템학회논문집
• /
• 제1권1호
• /
• pp.108-114
• /
• 2005

The generation of fine relics of suspensions is a significant interest as it holds the key to the fabrication of electronic devices. These processes offer opportunities for miniaturization of multilayer circuits, for production of functionally graded materials, ordered composites and far small complex-shaped components. Some novel printing methods of depositing ceramic and metal droplets were suggested in recent years. In an electro-hydrodynamic printing, the metallic capillary nozzle can be raised to several kilovolts with respect to the infinite ground plate or pin-type electrode positioned a few millimeters from the nozzle tip. Depending on the electrical and physical properties of the liquid, for a given geometry, it Is possible to generate droplets in any one of three modes, dripping, cone-jet and multi-jet. In this experiment, an alumina suspension flowing through a nozzle was subjected to electro-hydrodynamic printing using pin-type electrodes in the cone-jet mode at different applied voltages. The pin-type electrodes of 1, 100, 1000${\mu}m$ in diameter were used to form fine ceramic patterns onto the substrates. Various feature sizes with applied voltages and electrode diameters were measured. The feature sizes increased with the electrode diameter and applied voltages. The feature size was as fine as $30 {\mu}m$.

• 한국항공우주학회지
• /
• 제31권7호
• /
• pp.26-31
• /
• 2003

수직 이착륙기나 로켓 등을 발사시킬 때 사용되는 제트 편향기 설계를 위한 기초 자료를 얻기 위해 축대칭 원뿔에 충돌하는 초음속 제트에 대한 연구를 수행하였다. 본 논문에서는 충격파 간섭 또는 전단층에 의한 박리 등과 같은 유동 현상을 분석하기 위해 쉬리렌 장치를 이용한 유동가시화, 표면압력분포 등을 측정하였으며, 수치해석을 통해 실험결과와 비교, 검증하였다. 유동은 원뿔 충격파와 배럴 충격파 사이에서 간섭으로 인해 발생되는 충격파 패턴이었으며, 자유제트의 구조에 따라 다양한 형상을 나타내며 표면 압력분포에 크게 영향을 미친다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.37.2-37.2
• /
• 2010

Electrostatic spray deposition is an innovative coating technique that produces fine, uniform, self-dispersive (due to the Coulombic repulsion), and highly wettable, atomized drops. Copper-indium salts are dissolved in an alcohol-based solvent, which is then electrostatically sprayed onto a moderately heated, molybdenum-coated substrate. Solvent flowrates range from 0.02 to 5 ml/hr under applied voltages of 1 to 20 kV yielding drop sizes around a few hundred nanometers. By comparing the scanning electron miscrscope images of coated samples, the substrate temperature, applied voltage, solvent flowrate, and nozzle-substrate distance are demonstrated to be the primary parameters controlling coating quality. Also, the most stable electrostatic spray mode that reliably produces uniform and fine drops is the cone-jet mode with a Taylor cone issuing from the nozzle.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.715-716
• /
• 2008

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제36회 춘계학술대회논문집
• /
• pp.196-199
• /
• 2011

고압관, 가압관, 발사관으로 구성된 2단식 경가스 총을 사용하는 축소형 초고압 분사 시스템은 액체 제트를 초음속으로 생성할 수 있다. 이러한 초음속 액체 제트는 전방에 발생하는 충격파로 인한 액적 미립화를 촉진 시킬 수 있다. 본 연구에서는 초음속 액체 제트의 미립화 특성을 파악하기 위해 직선 원추형 노즐을 사용하여 기하학적인 형상 변화에 따른 실험을 진행하였다. 미립화 특성을 나타내는 SMD는 L/d가 증가할수록 $151.2{\mu}m$에서 $52.25{\mu}m$로 감소하는 경향을 나타내었다.

• 대한기계학회논문집B
• /
• 제29권4호
• /
• pp.504-511
• /
• 2005

The generation of fine relics of inorganic and metallic materials from precursor suspensions is of significant current interest as it holds the key to the fabrication of display and printed circuit board. Some novel printing methods depositing ceramic particles have been suggested in recent years. When a conducting liquid is supplied to a capillary nozzle at a low flow rate and when the interface between air and the liquid is charged to a sufficiently high electrical potential, the liquid meniscus takes the form of a stable cone, whose apex emits a microscopic jet. This is called as a cone-jet mode. In our experiments, an alumina particles flowing through a nozzle were subjected to electro-hydrodynamic printing in the cone-jet mode. The pattern of 'YONSEI' characters was tested at $10 {\mu}l/min$ of alumina ink flow rate and different applied voltages. At an applied voltage of 6 kV, feature size was in the range of $250 {\mu}m.$

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제27회 추계학술대회논문집
• /
• pp.30-33
• /
• 2006

Onset voltage plays a crucial role in the design of a spray microthruster. This paper presents an analytical electrostatic model to predict the behavior of onset voltage in an array of emitters. The basic idea of this method is to superimpose the electric potentials obtained from each individual emitter in an array of emitters. The results show that if one emitter operates and the other neighboring emitters are dry, the potential required for cone-jet spraying generally increases as the emitter spacing decreases (due to electrical shielding). However at very close spacing the potential can decrease. If all emitters operate at the same time, the phenomenon that even at very close spacing the onset voltage required for cone-jet spraying increases merely as the emitter spacing decreases.

• 한국분무공학회지
• /
• 제5권2호
• /
• pp.43-52
• /
• 2000

Numerical simulation of steady, non-evaporating hollow-cone sprays interacting with concentric annular air jets is performed using the discrete stochastic particle method in KIVA. The spray characteristics such as SMD, mean droplet velocity, liquid volume flux, air/liquid mass ratio, and droplet number density arc obtained and compared with the measurements involving different air flow rates in large and small annuli. Overall satisfactory agreement is achieved between calculation and experiment except for the deviation in the downstream SMD arising from uncertainty in the size distribution function at injection, and inaccuracy in the averaged spray parameters due to the small volumes of axisymmetric 2-D sector meshes close to the axis.